Aircraft Mechanic Reviewer Philippines PDF

AIRCRAFT MECHANIC REVIEWER PHILIPPINES Certificated mechanic with a power plant rating may perform ans. 100-hour inspection required by FAA regulations on powerplants, propellers, or any components therof, and may release the same to service In accordance with the table of sanction under PCAR’s pa...

AIRCRAFT MECHANIC REVIEWER PHILIPPINES Certificated mechanic with a power plant rating may perform ans. 100-hour inspection required by FAA regulations on powerplants, propellers, or any components therof, and may release the same to service In accordance with the table of sanction under PCAR’s part of the penalty for “ Failure to complete and sign maintenance release” is? ans. 15 to 30 day suspension Changes to the basic design of or the relocation of brackets or braces of the propeller control are considered ans. propeller minor repair Making simple fabric pitches not required rib stitching or removal of structural parts control surfaces is considered as ans. preventive maintenance After a mechanic holding an airframe and power plant rating completes a 100 hour inspection, what actions is required before the aircrafts returned to service? ES ans. make the proper entries in the aircraft’s maintenance record Each person performing an annual or 100-hour inspection shall use a check list that contains at least those items in the appendix of N ans. 14 CFR part 43 PI Repair operation on hydraulic/pneumatic accessories, complete disassembly of complex hydraulic/ pneumatic power valves if repairable, per manufacturer’s instruction are classified as IP ans. appliance major alteration IL Simple or minor preservations and the replacement of small standards parts not involving complex assembly operation is known as PH ans. preventive maintenance Each person performing maintenance, preventive maintenance or modification on an aeronautical product shall use the methods techniques and practices prescribed in (Part 5.6.6.1.6) R ans. performance rules, current manufacturer name, techniques and pratices AM Who shall ensure that the maintenance is amended or revised as is necessary to keep the information contained therein up to dated? ans. the operator An aircraft was not approved for return to service after an annual inspection and the owner to fly the aircraft to another maintenance base. Which statement is correct? ans. the owner must obtain a special flight permit Modification of the basic design not made in accordance with the recommendations of the appliance manufacturer or in accordance with applicable airworthiness directives is considered as (Part IS 5.1.12) ans. appliance major modification/ alteration In accordance with the table of sanction under PCAR’s Part 1, ‘the penalty for falsification’: ans. revocation Overhaul of pressure type carburetor mechanical accessories is considered as ans. appliance major repair CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Opening of the cold and hot sections of the turbine is considered as ans. power plant major repair The issuance of airworthiness certificate is governed by? ans. 14 CFR Part 21 Inspection of instrument for poor condition, markings for improper operation is included in the ans. annual inspection What are the general aviation airworthiness alerts? ans. these are publication of maintenance information which are brief and advisory but compliance is nor mandatory Changes of engine cowling which do not effect engine cooling, such as revision to the mounting bracket attachment is considered ans. powerplant minor alteration Maintenance operation requiring the disassembly of non-float type carburetor is classified as ES ans. powerplant major repair A document signed by an authorized representative of an approved maintenance organization (AMO) in respect with an inspection, repair or modification on a complete aircraft, engine or propeller after it has received a maintenance N performed (Part IS 5.1.12) ans. return to service PI Replacing or cleaning spark plugs and setting of spark plug gap clearance is considered as (Part IS 5.1.12) IP ans. preventive maintenance IL In accordance with table of sanction under PCAR’ part 1, the penalty for “improperly releasing an aircraft to service “ is ans. 30 to 60 days suspension PH Installation of propeller de-icing is considered as ans. propeller major alteration R 1 propellers are not included in the airworthiness directive system. 2 a certified powerplant mechanic may make a minor repair on an aluminum propeller and approve for return to service. Regarding the above statements AM ans. only no. 2 is true What is the maintenance recording responsibility of the person who complies with an airworthiness directive? ans. make an entry in the maintenance record of the equipment Which of the following is not considered as power-plant major alteration? ans. disassembly of float type carburetor No person, entity than the authority may disapprove an aircraft, airframe, aircraft engine, propeller appliance, or component part for return to service after it has gone under maintenance, preventive maintenance, rebuilding or modification except as provided in the ff. ans. (manufacturer’s and propeller manual) or A and B are Correct/ or both PCAR for MRO/AMO? ans. PCAR part 6 CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES In lieu of the appropriate ATO form of entering or recording a major repair or major alteration, the ASSSEC of air transportation will accept as replacement ans. the customer’s work order upon which repairs are recorded by the repair station Maintenance operation such as assembly and disassembly of ground adjustable propeller is considered ans. propeller minor repair An example of powerplant major repairs ans. (cylinder removal/piston removal) or all of the above Conversions of any for the purpose of using fuel rating or grade other than listed in the engine specification (Part IS 5.1.12) ans. powerplant major modification/alteration The replacement of a damaged engine mount with a new identical engine mount purchased from the aircraft manufacturer is considered a ans. minor repair ES Suitability for use of specific propeller with a particular engine airplane combination can be determined by reference to what informational source? N ans. aircraft specification or aircraft type certification data sheet PI In order to reconstruct lost/destroyed aircraft maintenance records, what is necessary to establish? ans. total service of the airframe IP A person working under the same supervision of certificated mechanic with an airframe and power plant is not authorized to perform IL ans. 100 hour inspection PH Each person performing a major repair or major modification shall forward a copy of that form to the authority in accordance with authority instructions within 48 hours after aeronautical product is approved for return to service (Part IS 5.7.1.1) R ans. 48 hours AM This is considered to be typical preventive maintenance operations (Part 5.1.12) ans. removal installation repair of landing gears Who shall sign for the maintenance release and certify that the maintenance work has been completed satisfactory and in accordance with the methods prescribed in the maintenance manual? ans. the ATO aircraft safety inspector only Installation of accessories which has not been approve for the engine is classified as ans. power-plant major alteration What is technical description of certificated propeller is found ans. propeller type certificate data sheets Who may perform inspection of the aircraft if it is away from the station where inspection is normally conducted ans. (an appropriate licensed aircraft mechanic/ the manufacturer of the aircraft) or both can perform inspection Instrument repairs may be performed ans. by an FAA approve instrument repair station CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Conversion of any purpose of sort using fuel, rating of grade other than called for in the engine specification is ans. power-plant major alteration A certificated mechanic with a power-plant rating may perform the ans. 100 hour inspection required by the FAA regulations on a powerplant or any component thereof and approves and returns to the same service The alteration of an aircraft or aeronautical product conformity with an approved standard ans. modification Replacing a carburetor with the same type as specified by the manufacturer is considered as ans. powerplant major alteration Who is responsible for ensuring that all aircraft maintenance records are kept up to date ans. licensed mechanic/ owner Repair to deep dents, cut, scar, nicks, etc. on the propeller considered as ES ans. propeller major alteration The endurance test for aircraft turbine engine is scheduled at N ans. one hour of alternate 5 minutes period PI Who has the authority for the return to service a propeller after a 100 hour inspection? 1. Mechanic with a powerplant rating, 2 any certificated repairman, 3 a non certificated mechanic under the supervision of a certificated mechanic with IP airframe and powerplant rating ans. 1 IL Installation of an accessory which is not approve for the engine is an example of ans. powerplant major modification/alteration PH Special repair to structural engine part by weighing or other methods is considered as ans. powerplant major repair R Owner shall retain maintenance and inspection records for minimum periods of AM ans. 90 days Any maintenance operation requiring opening of the cold and hot sections ans. powerplant major repairs Special repairs to structural engine parts by welding , plating, metalizing or other methods are an example of (Part IS 5.1.12) ans. powerplant major repair The kind of inspection consisting of visual check of an aircraft, its appliance, its application, its components and its system without disassembly is considered as ans. routine maintenance check A maintenance operation involving a major repair of an engine shall inspection and approval of an authorized person before it could be return to service. That person is ans. the ATO aircraft safety inspector CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Disassembly of a crankcase or crankshaft of a reciprocating engine equipped with an integral supercharger is an example of (Part IS 5.1.12) ans. powerplant major repair Certificated mechanics, under their general certificate priviledges, may ans. perform 100 hour inspection of instruments If an engine maintenance overhaul if an aircraft manual is no available, in which of the following can be necessary information for ignition timing can be found? ans. form the FAA technical manual no. 7 – aircraft powerplant handbook Which of the following may a certificated airframe and powerplant mechanic perform an aircraft and approve for return to service? 1. A 100 hour inspection,2. An annual inspection, under specified problems, 3. A progressive inspection, under specified problems ES ans. 1,3 Which regulation provides information regarding instrument range markings for an airplane certificated in normal category? N ans. 14 CFR Part 23 PI An airworthiness directives requires that a propeller be altered. Certificated mechanics could ans. perform and approve the work for the return to service if it is a minor alteration IP Troubleshooting and repairing broken circuit in landing light wirning circuit is considered as. IL ans. preventive maintenance The inspection of the main rotor transmission gearbox for obvious defects is included in what kind of inspection PH ans. major repair inspection The repair station may use maintenance release incorporates records for the ff. R ans. make of aircraft, model, serial number, nationality, registration mark and location of repair AM The operator shall ensure that the major components records be kept even in the end of operating life of the unit at least for a period of ans. 1 year Calibration and repair of instruments is an example of (Part IS 5.1.12) ans. appliance major repair With the respect to the major component of the aircraft, an operator shall ensure that the ff. records are kept ans. all of the above must be kept (the data of last inspection and the data of the total time of service/ the data of last overhaul) Before a major alteration such as installation of a fuel tank in a wing which was not designed to contain a fuel tank can be undertake, a mandatory requirement must be submitted and approved by the ASSEC of air transportation ans. all of the above (layout plan with specification/aircraft basic design and technical data) The flight test of an aircraft which has undergone major repair is mandatory before it can be returned back to service likewise, this also required after ans. minor repairs as replacement of wing tips CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Any change to the basic design of navigational equipment approved under type certificate is classified as ans. an appliance major alteration Replacement of components or complete units such as landing gears with parts supplied by the original manufacturer or manufactured in accordance with approved drawing is considered ans. airframe minor repair Who is authorized among the following to perform maintenance, preventive maintenance, repair or alteration on civil aircraft of the Philippine registry ans. all of the above Where should you put this entry? Removed right wing from aircraft and removed skin from outer 6 feet. Repaired buckled spar 49inches from tip in accordance with figure 8 in the manufacturers repair manual no. 28-1 ES ans. FAA Form 337 An aircraft that is due an annual inspection may be flown N ans. if a special flight permit has been issued for the aircraft PI When can you consider the repair on the following airframe major repair? ans. the repair of damage areas in plywood stressed covering exceeding six inches in any direction IP Airframe minor repair includes ans. wing and control surfaces fairings IL Any repair to spare ribs, and surface involves PH ans. airframe minor repair techniques What is the means by which the FAA notifies aircraft owners and other interest person of unsafe conditions and prescribed the conditions under which the product may continue to be operated R ans. airworthiness directives AM What does it means when it is said that a component conforms to the technical standard order ans. it does not require STC when used in alteration It means that the supervising mechanic personally maintain such observation of the work being performed properly, and the supervising mechanic is readily available for consultation with the person performing the work ans. direct supervision When can an aircraft are operated with a 100 hour inspection overdue ans. if necessary to reach a place at which the inspection can be done Modification to basic design of the exhaust system is considered ans. airframe major alteration The repair station or manufacturer may use a maintenance release of its own design provided the release includes the following ans. maker of aircraft, model, serial number, nationality and registration CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Changes to the basic design of the fuel or oil system are considered ans. airframe major modification Replacing defective safety wiring or cotter pins is ans. preventive maintenance Any restoration or maintenance work done on an airframe to place it back to a condition for safe operation after damage or deterioration shall mean ans. a repair The restoration of an engine mounts to a condition for safe operation after damage is classified as ans. an airframe major repair When overhauling electrical equipment , all necessary information should be obtain from ans. maintenance instructions published by the aircraft or equipment manufacturer No airframe, powerplant, or appliance which has undergone maintenance, minor repair, or minor alteration may be ES approve and returned to service except by one of the following ans. an appropriate licensed mechanic N For an individual (not a repair station) to conduct a complete 100 hours inspection on an aircraft and approve it for return to service requires a mechanic certificate with an ans. airframe and power plant ratings PI IP Changes to the basic design made in accordance with ‘assec’ of the air transportation approved recommendations of the “landing gear shock strut” manufacturing accordance with an ATO airwothiness directives are considered to be IL ans. appliance minor alteration Replacement of an auto pilot with parts manufactured in accordance with approved drawings is considered PH ans. appliance major repair The procedure recommended in making a scarf for a spar splice is R ans. jointer AM The installation or removal of equipment of equal or less weight and in the same location as the last listed as optional equipment in the aircraft specification is ans. an airframe minor alteration When towing a large aircraft? ans. a person should be in the cockpit to operate brakes If the work performed on an aircraft has been done satisfactory, the signature of an authorized person on the maintenance records for maintenance or alterations performed constitutes ans. approval for return to service only for the work performed Replacing any cowling not required removal of the propeller or any disconnecting of flight controls is considered ans. preventive maintenance Which statement is correct regarding an aircraft that is found to be un airworthy after an annual inspection, due to an item requiring a major repair(assuming approve data is used to accomplish the repair)? ans. an appropriately rated mechanic may accomplish the repair and IA may approved the aircraft for return to service CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Which is not considered an airframe major alteration ans. strengthening or reinforcing the fuselage longeron A permanent record of every maintenance (not including preventive maintenance) repair or building or alterations on any airframe, power-plant , propeller, or appliances shall be maintained by ans. the registered operator Which statement about Airworthiness Directives is true ans. compliance with an applicable AD is mandatory and must be recorded in the maintenance records A simple minor preservation operation and the replacement of small standard parts not involving complex assessments operation as classified as ans. preventive maintenance A person should approach or leave a helicopter in the pilots field of vision whenever the engine is running in order to avoid ES ans. the tail rotor Which of the ff. is a portion of the permanent maintenance record entry a 100 hour inspection ans. the date of the inspection and aircraft time in service N A maximum time a 100 hour inspection may be extended is ans. 10 hrs. PI IP Changes to the basic design of the fuel or oil system are considered ans. airframe major modification IL Changes made to structural elements for the purpose of improving the service life but the cumulative weight changes of all such maintenance work done since the aircraft was re weight but do not exceed 2% of the certificate empty weight PH under 12,500 pounds per gross weight was classified as ans. airframe minor alteration R Who is responsible for making the entry in the maintenance records after annual, 100hour, or progressive inspection? ans. the person approving or disapproving for return to service AM Any change to the basic design of navigational equipment approved under type certificate is classified as. ans. an appliance major alteration An aircraft that is required by section 91.409 to have a 100 hour inspection may be flown beyond the inspection requirements. ans. if necessary to reach a place at which the inspection can be accomplished, but not to exceed 10 flight hours Changes of the ff. type to a power-plant, or airframe when not listed in the specifications issued by the air transport office in accordance with the manufacturer, are considered ans. aircraft major alteration When can you consider the repair on the ff. airframe, a major repair? ans. the repair of damaged areas in the plywood stressed covering exceeding 6 inches in any direction Which of the ff. is considered to be typical maintenance ans. repairing dents, cuts, and small cracks on wooden propeller CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Radio equipment installations made in accordance with the supplemental type certificate date require approval return to service ans.by the holder of an inspection authorization No aircraft which has undergone any major or major alteration shall be returned to service unless such aircraft thereafter had been testing flown by a person holding at least ans. a private pilot license No airframe, powerplant or appliance which has undergone maintenance, minor repair or minor alteration may approve and returned to service except by one of the ff. ans. an appropriate licensed aircraft mechanic During an annual inspection, if a defect which makes the aircraft unairwothy, the person disapproving must ans. provide a written notice of the defect to the owner It means that the supervising mechanic personally maintain such observation of the work being performed as is necessary to insure that the work is being performed properly, and the supervising mechanic is readily available for consultation with the person performing the work ES ans. direct supervision Repair made on the hydraulic/pneumatic system is concerned N ans. an airframe minor repair PI When major repair alteration results in any change in the aircraft operating limitations or data contained in approved airplane flight manual appropriate amendments to the aircraft operating limitations shall be made in IP ans. the form and manner prescribe by the CAAP A permanent record of every maintenance (not including preventive maintenance) repair of building or alterations on IL any airframe, power plant, or appliances shall be maintained by ans. the registered operator PH Where is the record of compliance with airworthiness directives or manufacturers service bulletins normally indicated? ans. aircraft maintenance records R Any repair to spar ribs, and surface involves AM ans. airframe minor repair technique Strengthening or reinforcing the fuselage longeron ans. airframe major repair Where would you find the recommended statement for recording the approval or disapproval for return to service of an aircraft after a 100 hour or annual inspection ans. 14 CFR Part 43 When taxiing an airplane with a quartering tailwind, the elevators should be ans. upwind aileron should be in the down position Which is an appliance major repair ans. overhaul of a hydraulic pump Which of the ff. is considered to be typical preventive maintenance ans. removal, installation and repair of landing gear tires CHORESCA REVIEW MANUAL AIRCRAFT MECHANIC REVIEWER PHILIPPINES Large airplanes and turbine power multiengine airplanes operated under Federal aviation Regulation part 91, general operating flight rules, must be inspected ans. in accordance with the inspection program authorized under federal aviation regulation part 91, sub E Airframe shall mean ans. any and any kinds of booms, landing gears, empennages, fairing, or control of any and all kinds of fuselage, booms, empennages, nacelles, fairings, cowlings, control surfaces ES N PI IP IL PH R AM CHORESCA REVIEW MANUAL