2024 Facts for Drivers Hazardous Materials Regulations PDF
Document Details
Uploaded by xltheriot
Tags
Summary
This document provides information about metric measurements, flashpoints, and temperature classifications for hazardous materials. It includes questions and answers about the requirements for ensuring compliance with regulations. It seems to be a guide for drivers or others involved in the transport and handling of hazardous chemicals.
Full Transcript
Q. What metric measurements will be most important to drivers in assuring compliance with the Hazardous Materials Regula- tions? A. Some measurements affect placarding requirements or define hazard classes such as those listed below showing the metric units and the U.S. equiv...
Q. What metric measurements will be most important to drivers in assuring compliance with the Hazardous Materials Regula- tions? A. Some measurements affect placarding requirements or define hazard classes such as those listed below showing the metric units and the U.S. equivalent: 1. 454 kilograms (1,001 pounds) - the weight below which placarding is not required for Table 2 hazardous materials 2. 60.5° C (141° F) - the flashpoint that marks the upper limit for flammable liquids under the regulations 3. 60.5° C (141° F) and 93° C (200° F) - the flashpoints, above and below which a liquid ts classified as a combustible liquid under the regulation 37.8° C (100° F) and 60.5° C (141° F) - the flashpoints, above and below which a flammable liquid, such as diesel fuel and fuel oil, may be reclassified as a combustible liquid for domestic transportation only 450 liters (119 gallons) - the volume above which a packag- ing is deemed to be a bulk packaging for liquids 400 ke (882 pounds) - the weight capacity above which a packaging is deemed to be a bulk packaging for solids 454 ke (1,001 pounds) - the weight capacity above which a packaging is deemed to be a bulk packaging for gases 4,000 kg (8,820 pounds) - the weight of one commodity in non- bulk packaging for which identification numbers are to be displayed on a transport vehicle Q. Other than flashpoint, how does temperature apply to the classification of HM? A. Temperature may result in a material transported in a bulk packaging being classed as an “elevated temperature material” when that material ts: 1. A liquid transported at a temperature at or above 100° C (212° F) 2. A. liquid with a flashpoint at or above 37.8° C (100° P) that is intentionally heated and transported at or above its flash- point 3. A solid transported at or above 240° C (464°F)
