Production Machinery (PAES:101-166) PDF

Sprinkler Head – Specifications PRODUCTION MACHINERY Part 1: Rotating Impact-Driven Type(PAES 125) – Warranty - six (6) months (PAES:101-166) Rotating...

Sprinkler Head – Specifications PRODUCTION MACHINERY Part 1: Rotating Impact-Driven Type(PAES 125) – Warranty - six (6) months (PAES:101-166) Rotating Sprinkler Head – Methods of Test(PAES 126) Hitch for Walking-type Agricultural Tractor – 170 kPa upto 485 kPa at increments of 35 kPa Specifications(PAES 107) Sprinkler Nozzle Height Above Collectors - CRS with 0.37-0.44% carbon content(eg. AISI 1040) - pin Sprinkler Type Sprinkler Inlet Size Maximum Nozzle sleeve and hitch pin. (Nominal Pipe Height - Mild steel plate with 0.18-0.23% carbon content (eg. AISI Diameter) Above Collector 1020) - hitch frame. (Walking-type Agricultural Tractor-Specifications Part 1 Riser mounted; 32 mm or smaller 915 mm : Pull-type (PAES 109) and Walking-type Agricultural rotating 38 mm or larger 1830 mm Tractor–Specifications Riser mounted; Part 2: Rotary Tilling-type (PAES 110) - 92 db non-rotating All 460 mm Warranty - six (6) months Drilling Rig – Specifications (PAES 127) and Drilling Rig – Walking-Type Agricultural Tractor–Methods of Test Methods of Test(PAES 128) - 92 db (PAES 111) – - Carbon steel with at least 80% carbon content (AISI 1080) or Lever-Operated Knapsack Sprayer–Specifications (PAES high speed steel with molybdenum 112) - The sprayer shall have a minimum volumetric Warranty - six (6) months efficiency of 80%. Electric Motor – Specifications(PAES 129) and Electric Motor - more than 35 kPa, – Methods of Test(PAES 130) Tank - minimum capacity of 10 liters(22 kgs.) - Universal motor - small series motors up to 3.73 kW Warranty - six (6) months Power rating Lever-Operated Knapsack Sprayer–Methods of Test Service Factor kW hp (PAES 113) – Drop(height of 750 mm) Centrifugal Pump–Specifications (PAES 114) and 1.40 0.04 to 0.09 1/20 to 1/8 Centrifugal, Mixed Flow and Axial Flow Water Pumps– 1.35 0.12 to 0.25 1/6 to 1/3 Methods of Test (PAES 115) 1.25 0.37 to 0.75 1/2 to 1 Warranty - six (6) months 1.15 >0.75 to 149.20 >1 to 200 Small Engine–Specifications(PAES 116) - 92 db 1.00 >149.20 to 373 >200 to 500 Warranty - six (6) months Small Engine–methods of test(PAES 117) 200 rpm, - 7.5 m Warranty - six (6) months away and height of 1.2 m Moldboard Plow – Specifications(PAES 131) - Carbon steel Four-Wheel Tractor–Specifications(PAES 118) and Four- with at least 80% carbon content (e.g. AISI 1080) or alloy steel Wheel Tractor–Methods of Test (PAES 119) - 92 db with atleast 0.0005% boron content Warranty - six (6) months Disc/Moldboard Plow – Methods of Test(PAES 132) Disc Harrow – Specifications(PAES 120) – Warranty - six Traveling Speed (6) months - four-wheel tractor-drawn plows - 5 kph to 6 kph - two-wheel tractor-drawn plows - 3 kph to 4 kph Concavity (depth), mm 100 to 300 - animal-drawn plows - 2 kph to 4 kph Disc angle, ° 24 maximum Disc Harrow – Methods of Test(PAES 133) Length of spool, mm 175 or 225 + 2 Furrower – Specifications(PAES 134) Carbon steel with at Ground clearance, mm 125 least 80% carbon content (e.g. AISI 1080) or alloy steel with Disc Plow–Specifications(PAES 121) – atleast 0.0005% boron content Warranty - six (6) months Warranty - six (6) months Seeder and Planter – Specifications(PAES 122) and Furrower – Methods of Test(PAES 135) Seeder and Planter–Methods of Test(PAES 123) Traveling Speed - 7 kph to 8 kph Warranty - six (6) months Agricultural Trailer – Specifications(PAES 136) Required Minimum Efficiency for Tractor Power-Driven Warranty - six (6) months Seeder Agricultural Trailer – Methods of Test(PAES 137) Type of seeder Field Efficiency (%) Speed Limit of Tractor on Different Ground Surface Row-crop planter Tractor Type Speed Limit on Speed Limit on Paved Road Bare Dirt Without fertilizer applicator 60 kph Road kph With fertilizer applicator 55 Two-wheel tractor 8 to10 4 to 6 Seed drill 65 Four-wheel tractor 15 to 20 8 to 10 Walking-type Agricultural Tractor–Specifications Part Roll-Over Protective Structures (ROPS)–Specifications 3:Special Type(Float-Assist Tiller)(PAES 124) (PAES 139) Steel with an as-rolled thickness of not less than 2.5 - 92 db mm and with a carbon conten of not less than 0.2 % Weeder – Specifications(PAES 141) -Carbon steel with at least 50% carbon content and.05%  sulphur and phosphorus content (e.g. AISI 1055) Mist Blower–Specifications(PAES 155) and Methods of Test -350 and 450 HB (Brinell Hardness), or 37.7 to 47.8 (PAES 156) HRC (Rockwell Hardness), or 370 to 483 HV (Vickers - net weight of not more than 15 kg Hardness) - wand, tank cover and gasket-chemical resistant Two-wheel tractor-drawn - Carbon steel with at least 80% polyvinylchloride or better material carbon content (e.g. AISI 1080) - Hose clamps and tank - non-corrosive material (e.g.engineering Four-wheel tractor-drawn - Carbon steel with at least 80% plastic) carbon content (e.g. AISI 1080) or alloy steel with atleast - strap-durable and non-absorbent material (e.g. nylon fabric) 0.0005% boron content Strap pads – thickness(10 mm),width(65 mm) weeding efficiency (80%) *Mounted mist blower-main frame(AISI 1020 or bettermaterial) Weeder – Methods of Test(PAES 142) Qrate = 0.12 to 0.17 Lpm per nozzle, air speed(90 m/s) Traveling Speed Warranty- one (1) year - four-wheel tractor-drawn plows - 5 kph to 6 kph Power Sprayer for Mango–Specifications(PAES 157) and - two-wheel tractor-drawn plows - 3 kph to 4 kph Methods of Test(PAES 158)-operating pressure of 1.21 MPa animal-drawn plows - 2 kph to 4 kph (175 psi) to 1.75 MPa(250psi), Qrate =15 Lpm Rice Drum Seeder– pecifications(PAES 143) Filter-mesh of 100 per square centimeter Warranty - six (6) months Warranty- parts and services (6) months, prime mover (1) year Rice Drum Seeder–Methods of Test(PAES 144) Sugarcane Planter–Specifications(PAES 159) and Methods of Traveling Speed - 1 kph to 2 kph Test(PAES 160)-80% field efficiency Granular Fertilizer Applicator–Specifications(PAES 145) Warranty - six (6)months Warranty - six (6) months -Shanks and furrow closer-alloy steel (e.g. AISI 5160) Granular Fertilizer Applicator–Methods of Test(PAES -furrower- heat-treated carbon (e.g. AISI 1080) 146) - Traveling Speed - cane hopper, Feeding shanks, and tractor engagement - - four-wheel tractor-drawn plows - 5 kph to 6 kph assembly-mild steel (e.g. AISI 1020) - two-wheel tractor-drawn plows - 3 kph to 4 kph *Semi-automatic sugarcane planter- chopper(hardened steel animal-drawn plows - 2 kph to 4 kph (e.g. AISI 1085) PHILIPPINE NATIONAL STANDARD Soil Auger–Specifications(PAES 161) and Methods of Test Field Cultivator – Specifications(PAES 147) – 80% field (PAES 162) - 80% of efficiency -noise higher than 92 db efficiency Warranty - one (1) year -main frame and transverse toolbars mild steel (e.g.AISI Spring-tooth Harrow–Specifications(PAES 163) and Methods 1020) of Test (PAES 164) - 80% field efficiency -Shanks-alloy steel (e.g. AISI 5160) -main frame, Transverse tool bars, Lever assembly-mild steel -Shovel-heat-treated carbon (e.g. AISI 1080) (e.g.AISI 1020) Warranty - three (3) years Spring-teeth and cutting tips, spring-tooth clamps-alloy steel Field Cultivator–Methods of Test(PAES 148) (e.g. AISI 5160) Subsoiler–Specifications(PAES 149) and Methods of *spring-tooth harrow- depth of 50 to 150 mm (2” to 6”) Test(PAES 150)– 80% field efficiency Warranty - one (1) year main frame and transverse toolbars mild steel(e.g.AISI Granule Applicator–Specifications(PAES 165) Methods of 1020) Test (PAES 166) - 80% field efficiency. - Shanks and Wear shin-alloy steel (e.g. AISI 5160) *Handheld type - ripper points- heat-treated carbon steel (e.g. AISI 1080) tank applicator- resistant polyvinylchloride or better Warranty - three (3) years material Mechanical Rice Transplanter–Specifications(PAES 151) Lever arm, Discharge outlet- mild steel (e.g. AISI 1020) and Methods of Test(PAES 152)– 80% field efficiency *Knapsack type- net weight of not more than 15 kg Float and Guide wheels-non-corrosive material (e.g. -Wand,tank,tank cover and gasket,flexible hose- chemical engineering plastic) resistant polyvinylchloride or better material transplanting arm-G.I. steel or better material -Hose clamps- corrosion resistant material. grasping forks-G.I. plain sheet gauge #24 or better material -Strap- durable and non-absorbent material (e.g. nylon fabric) Warranty - three (3) years - lever arm, Screw or spinner plate- mild steel (e.g. AISI 1020) Hand Pump–Specifications(PAES 153) and Methods of *Walk-behind type and Mounted type Test(PAES 154) chassis assembly,hopper, screw or spinner plate, agitator-mild Cylinder assembly, plunger, Pump rods and check valve- steel (e.g. AISI 1020) cast iron or better material Warranty - one (1) year Gaskets-non-corrosive material (e.g. rubber). Warranty- one (1) year