BAL_1800050_03_001_1_EN.pdf

www.reinhausen.com On-load tap-changer OILTAP® M Technical Data TD 050/03 NOTE! The product may have been modified after this document went to press. We expressly reserve the right to make changes to the technical data, the design or the scope of delivery. In general, the information provided and the arrangements agreed during processing of the rele- vant offers and orders are binding. Table of Contents Table of Contents 1 General......................................................................................................................................................... 1 1.1 Description of type designation................................................................................................................ 1 1.2 Summary of technical data........................................................................................................................ 2 1.3 Overview of on-load tap-changer models............................................................................................... 4 1.4 Examples of wiring diagrams used in practice (contact designation according to MR standard).. 8 1.5 Example wiring diagram for OILTAP®M, multiple coarse tap selector design................................... 12 2 Technical data............................................................................................................................................. 13 2.1 Rated through-current (Iu), rated step voltage (Ui), and step capacity (PStN).................................. 13 2.2 Contact life.................................................................................................................................................. 14 2.3 Rated withstand voltages of the internal insulation............................................................................. 15 2.4 On-load tap-changer OILTAP®M III 600 Y... M I 1503 with coarse tap selector (up to 5 coarse taps).................................................................................................................................. 17 3 Special types................................................................................................................................................ 18 3.1 Parallel bridges for parallel connection of tap selector planes............................................................ 18 3.2 On-load tap-changer OILTAP®M I 603 and M I 803 with 3-sector diverter switch........................ 18 3.3 On-load tap-changer OILTAP®M I 502 and M II 502 for 16 2/3 Hz.................................................. 19 3.4 Two-pole on-load tap-changer OILTAP®M II 352/502/602................................................................. 19 3.5 On-load tap-changer OILTAP®M III 350 Y...M I 1503 for linear voltage regulation, up to 34 operating positions..................................................................................................................... 19 4 Annex........................................................................................................................................................... 20 4.1 OILTAP®M III 350/500/600 Y-0/W/G (8997102E)................................................................................. 20 4.2 OILTAP®M II 352/502/602-0/W/G (8997112E)..................................................................................... 21 4.3 OILTAP®M I 351/501/601-0/W/G (8980025E)...................................................................................... 22 4.4 OILTAP®M I 802-0/W/G (8997122E)....................................................................................................... 23 4.5 OILTAP®M I 1203/1503-0/W/G (8997132E).......................................................................................... 24 4.6 OILTAP®M III K - 0/W/G (7275470E)...................................................................................................... 25 4.7 OILTAP®M III 600 Y with multiple coarse tap selector (8995943E)................................................... 26 4.8 OILTAP®M I 601 with multiple coarse tap selector (8995913E)......................................................... 27 4.9 OILTAP®M I 802 with multiple coarse tap selector (8995923E)......................................................... 28 4.10 OILTAP®M I 1203/1503 with multiple coarse tap selector (8995933E)............................................ 29 4.11 OILTAP®M I 351...1503, RM I 601...1502 - tie-in resistors with/without potential switch (8986902E).................................................................................................................................................. 30 4.12 OILTAP®M II - tie-in resistors with/without potential switch (8986912E)........................................ 31 4.13 OILTAP®M III Y, RM III Y - tie-in resistors with/without potential switch (8986922E)................... 32 4.14 OILTAP®M I 351...1503, RM I 601...1502 - ins. cylinder with potential switch without tie-in resistor (8988043E).................................................................................................................................................. 33 4.15 Supplementary drawings for on-load tap-changers (8980125E)........................................................ 34 4.16 OILTAP®M - installation drawing for centric drive unit (893978BE, sheet 1).................................. 35 4.17 OILTAP®M - installation drawing for centric drive unit (893978BE, sheet 2).................................. 36 4.18 On-load tap-changer head, centric drive unit (893899CE)................................................................. 37 4.19 OILTAP®M, MS, R, RM - on-load tap-changer head versions (7200261E)........................................ 38 4.20 OILTAP®M, MS, R, RM - swivelling range of the gear unit (7200272E)............................................ 39 4.21 OILTAP®M - oil compartment contact screening (7303360E)............................................................. 40 4.22 Tap selector contact arrangement - no. of contacts per plane 10...22 (8980133E)....................... 41 4.23 Mounting position of the tap selector terminals (8904778E)............................................................. 42 Technical Data 050/03 OILTAP® M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 Table of Contents 4.24 OILTAP®M, RM, VACUTAP®VRC/VRE - connection cables 3W, 1G, 3G (7235901E)......................... 43 4.25 OILTAP®M and VACUTAP®VRC/VRE - fine tap selector and change-over selector screening (7303350E).................................................................................................................................................. 44 4.26 OILTAP®M I 802/8031203/1503 - bridges for parallel connection of tap selector terminals (8995981E).................................................................................................................................................. 45 4.27 OILTAP®M, MS, RM - horizontal drive shaft, centric drive unit (8938968E).................................... 46 4.28 OILTAP®M III 350/500/600 Y - tap selector winding (8911073E)...................................................... 47 4.29 OILTAP®M I 351/501/601 - tap selector winding (8911086E)........................................................... 48 4.30 OILTAP®M I 1203/1503 - tap selector winding (8911094E)............................................................... 49 4.31 OILTAP®M I 802 (8911103E) - tap selector winding............................................................................ 50 4.32 Special version for bell-type tank installation (8967629E)................................................................. 51 4.33 OILTAP®M, MS, R, RM with flange for pressure relief valve (8951686E).......................................... 52 4.34 Tap selector bottom with additional screening - reversing change-over selector version (8939341E).................................................................................................................................................. 53 4.35 Tap selector bottom with additional screening - coarse change-over selector version (8939351E).................................................................................................................................................. 54 4.36 Tap selector bottom with hole D20 and D13 (7256491E).................................................................... 55 Technical Data TD 050/03 OILTAP® M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General 1 General 1.1 Description of type designation Example M III 600 Y - 72,5 / C - 10 19 1W R - / - basic wiring diagram Type OILTAP® M M Number of phases 1 phase I 2 phases II 3 phases III IUm [A] MI, MII, MIIIY 350 MI, MII, MIIIY 500 MI, MII, MIIIY 600 MI 800 MI 1200 MI 1500 Number of 1 sector 1 phases used 2 sectors 2 3 sectors 3 3 sectors (Y) 0 Applications only for application with star point Y Um [kV] 72,5 123 170 245 not for Y 300 Tap selector size B C D not for multiple coarse tap selector DE Division 10 10 12 12 14 14 16 16 18 18 22 22 Number of maximum 10 10 operating positions 12 12 without change-over selector 14 14 16 16 18 18 22 22 Number of maximum 10 19 operating positions 12 23 with change-over selector 14 27 (reversing change-over 16 31 selector or coarse change- 18 35 Number of maximum 10 59 operating positions 12 71 with multiple coarse tap 14 83 selector 16 95 18 107 Center positions No center position (without change-over selector) 0 1 center position 1 3 center positions 3 Change-over selector reversing change-over selector W coarse change-over selector G Tie-in measures tie-in resistor R (tie-in resistor and/or potential switch S potential switch attached) potential switch with tie-in resistor P Figure 1 Description of type designation Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 1 1 General 1.2 Summary of technical data On-load tap-changer M III 350 Y M III 500 Y1) M III 600 Y M I 351 M I 5011) M I 601 M I 802 M I 1203 M I 1503 Number of phases and 3 (star point) 3 (star point) 3 (star point) 1 1 1 1 1 1 application Max. rated through- 350 500 600 350 500 600 800 1200 1500 current IUm (A) Rated short-time current 6 8 8 6 8 8 16 24 24 (kA) Rated short-circuit 3 3 3 3 3 3 3 3 3 duration (s) Rated short-circuit current 15 20 20 15 20 20 40 60 60 (kA) Max. rated step voltage 3300 3300 3300 3300 3300 3300 3300 3300 3300 Uim (V)2) Step capacity (P StN) (kVA) 1000 1400 1500 1000 1400 3) 1500 3) 2000 3) 3100 3500 1) Only for network application ! 2) The max. rated step voltage may be exceeded by up to 10% following overexcitation of the transformer, provided the step capacity is not exceeded. 3) Special types with higher step capacities are available Table 1 For all on-load tap-changer versions Rated frequency (in Hz) 50...60 Operating positions without change-over selector: max. 18 with change-over selector: max. Rated insulation level Maximum equipment voltage Um 72,5 123 170 245 300 5) 4) (kV) Maximum operating voltage Ub (phase- 55 79 145 170 245 phase) at the diverter switch (kV) Rated lightning impulse withstand 350 550 750 1050 1050 voltage (kV, 1,2⏐ 50) Rated switching impulse voltage (kV) 850 Rated power-frequency withstand 140 230 325 460 460 voltage (kV, 50 Hz, 1 min) Rated withstand voltages of the see Table 3 internal insulation Oil compartment pressure-tight up to 0.3 bar continuous differential pressure (test pressure 0.6 bar) Oil suction pipe standard equipment (for details see BA 18) Temperature range The OILTAP® M on-load tap-changer can be operated in the rated load range for oil temperatures between – 25 °C and + 105 °C. Instructions for operation under arctic conditions can be found in the general technical data document TD 61. 4) According to VDE 0111 part 1: rms value of the conductor-conductor voltage for which the insulation of a component is dimensioned. 5) The three-phase on-load tap-changer versions M III 350 Y, M III 500 Y, M III 600 Y are not with available an equipment voltage of Um=300 kV. Table 2 Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 2 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General On-load tap- M III 350 Y M I 351 M I 802 M I 1203 changer M III 500 Y M I 501 M I 1503 M III 600 Y M I 601 Weight (kg) approx. without change- 265 240 250 260 over selector with change-over 280 260 270 285 selector Displacement volume (dm³) 72.5 kV 200 190 195 200 approx. 123 kV 225 215 220 225 170 kV 245 235 240 245 245 kV 265 255 260 265 300 kV 285 265 280 285 Oil capacity VS and minimum 72.5 kV 130 volume DV6) of the diverter 123 kV 150 switch oil compartment (dm³) 170 kV 170 245 kV 190 300 kV 210 6) Minimum volume of the oil conservator for oil temperature υ = -30°C...+100°C: DV = 0.1 VS + 4 (dm³) Table 3 Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 3 1 General 1.3 Overview of on-load tap-changer models Figure 2 Overview of on-load tap-changer models (8997401D) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 4 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General Figure 3 Overview of basic wiring diagrams with identification of tap selector terminals according to MR standard (8906164D_1) The contact designations correspond to the data in the dimensional drawings for the on-load tap-changers. Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 5 1 General Figure 4 Overview of basic wiring diagrams with identification of tap selector terminals according to MR standard (8906164D_2) The contact designations correspond to the data in the dimensional drawings for the on-load tap-changers. Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 6 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General Figure 5 Overview of basic wiring diagrams with identification of tap selector terminals according to MR standard (8906164D_3) The contact designations correspond to the data in the dimensional drawings for the on-load tap-changers. Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 7 1 General 1.4 Examples of wiring diagrams used in practice (contact designation according to MR standard) Figure 6 Example: On-load tap-changer M III 350/500/600 Y, basic wiring diagram 10 19 1 W Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 8 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General Figure 7 Example: On-load tap-changer M III 350/500/600 Y, basic wiring diagram 10 19 3 W Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 9 1 General Figure 8 Example: On-load tap-changer M I 802, basic wiring diagram 14 27 1 G Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 10 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 1 General Figure 9 Example: On-load tap-changer M I 1203/1503, basic wiring diagram 18 35 1 W Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 11 1 General 1.5 Example wiring diagram for OILTAP®M, multiple coarse tap selector design Figure 10 Example: On-load tap-changer M I 802, basic wiring diagram 16 79 1 G Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 12 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 2 Technical data 2 Technical data 2.1 Rated through-current (Iu), rated step voltage (Ui), and step capacity (PStN) On-load tap- M III 350 Y M III 500 Y M III 600 Y M I 802 M I 1203 M I 1503 changer M I 351 M I 501 M I 601 I u (A) 300 350 395 500 500 600 610 800 940 1200 1200 1500 Ui (V) 3300 2860 3300 2800 2800 2500 3300 2500 3300 2580 2580 2340 PStN (kVA) 1000 1000 1300 1400 1400 1500 2000 2000 3100 3100 3100 3500 Table 4 Rated through-currents (Iu), associated rated step voltages (Ui), and step capacities (PStN), upper and lower corner point of the step voltage curve (see Figure 11) Figure 11 Step capacities (rated step voltages Ui, rated through-currents Iu) (8997520D) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 13 2 Technical data 2.2 Contact life The expected mean contact life of the arc-carrying diverter switch contacts can be estimated according to Fig. 8, depending on the relative load (Iu/Ium). Only approximate data can be provided, since the actual contact life is influenced by a wide range of operational factors (this does not apply to constant-current operation). The inspection instructions must be followed. Figure 12 Expected mean contact life with average load n: number of operations Iu: Rated through-current Ium: Max. rated through-current Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 14 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 2 Technical data 2.3 Rated withstand voltages of the internal insulation Figure 13 shows the voltage stresses at the tap winding for the three main basic connection types for three-pole on-load tap- changers and single-pole on-load tap-changers. When selecting an on-load tap-changer the maximum load at the tap selector must be verified in order to avoid the associated rated withstand voltages being exceed. Without change-over selector With reversing switch With coarse tap selector in (+) - position With coarse tap selector in (-) - position CAUTION The maximum rated lightning withstand impulse voltage loads at a0 in the center positi- on must be taken into account! a0 = between selected and preset diverter switch tapping. a1 = between fine tap selector contacts of the winding for one step (closed or open) a = between start and end of a fine tap changer winding; for versions with coarse tap changer winding also between start and end of a coarse tap changer winding. Note for coarse tapping in (-) position of the change-over selector: For loads involving impulse voltage the permitted withstand voltage "a" between the end of a coarse tap changer win- ding connected to fine tap selector contact K and the fine tap selector contact at the end of the fine tap changer win- ding of the same phase must be taken into account. b = between the fine tap selector contacts for different phases and between change-over selector contacts for different phases connected to the start / end of a fine tap changer winding or a fine tap selector contact. f = between diverter switch lead and ground Additionally for coarse tapping in ( + ) position of the change-over selector: c1 = from a ( - ) change-over selector contact to the lead for the same phase. c2 = between ( - ) change-over selector contacts for different phases. Figure 13 On-load tap-changer M III 350 Y... M I 1503, specific voltage stresses at the tap winding (rated withstand voltages) (8997560D) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 15 2 Technical data Insulation distances Tap selector size B Tap selector size C Tap selector size D Tap selector size DE kV kV kV kV kV kV kV kV 1,2I50 50 Hz 1,2I50 50 Hz 1,2I50 50 Hz 1,2I50 50 Hz 1 min. 1 min. 1 min. 1 min. a0 90 20 90 20 90 20 90 20 a1 150 30 150 30 150 30 150 30 a 265 50 350 82 490 105 550 120 b1) 265 50 350 82 490 146 550 160 c1 485 143 545 178 590 208 660 230 c21) 495 150 550 182 590 225 660 250 1) Insulation distance not applicable for single-pole on-load tap-changers Table 5 On-load tap-changer M III 350 Y... M I 1503, rated withstand voltages of the internal on-load tap-changer insulation The permissible maximum operating voltage at the individual tap selector sections corresponds to half the value of the rated AC withstand voltages listed in Table 5. without change-over selector with reversing change-over selector with coarse tap selector p-change configurat tap selector size -change configurat tap selector size -change configurat tap selector size 10050 B/C/D/DE 10071W B/C/D/DE 10071G B/C/D/DE 10060 B/C/D/DE 10081W B/C/D/DE 10081G B/C/D/DE 10070 B/C/D/DE 10091W B/C/D/DE 10091G B/C/D/DE 10080 B/C/D/DE 12101W B/C/D/DE 12101G B/C/D/DE 10090 B/C/D/DE 12111W B/C 12111G B/C 10100 B/C/D/DE 14111W D/DE 14111G D/DE 12110 B/C/D/DE 14121W B/C 14121G B/C 12120 B/C/D/DE 14131W B/C 14131G B/C 14130 B/C/D/DE 16121W D/DE 16121G D/DE 14140 B/C/D/DE 16131W D/DE 16131G D/DE 16150 B/C/D/DE 16141W B/C/D/DE 16141G B/C/D/DE 16160 B/C/D/DE 16151W B/C 16151G B/C 18170 B/C/D/DE 18151W D/DE 18151G D/DE 18180 B/C/D/DE 18161W B/C 18161G B/C 22190 B/C/D/DE 18171W B/C 18171G B/C 22200 B/C/D/DE 10191W B/C/D/DE 10191G B/C/D/DE 22210 B/C 12231W B/C/D/DE 12231G B/C/D/DE 22220 B/C 14271W B/C/D/DE 14271G B/C/D/DE 16311W B/C/D/DE 16311G B/C/D/DE 18351W B/C/D/DE 18351G B/C/D/DE Table 6 Possible configurations (also possible as 3 W, 3 G) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 16 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 2 Technical data 2.4 On-load tap-changer OILTAP®M III 600 Y... M I 1503 with coarse tap selector (up to 5 coarse taps) Fine voltage regulation requires a large number of operating positions that may necessitate a multiple coarse tapping arrangement. For example, with a 5-stage coarse winding and a fine tap changer winding with 18 tappings, 107 operating positions can be achieved. The coarse tap selector is attached to both sides of the fine tap selector. The on-load tap-changers are available for Um = 72.5... 300 kV and for 2... 5 coarse taps (tap selector size B, C and D). Multiple coarse tap selector a0 = between selected and preset diverter switch tapping a1 = between fine tap selector contacts of the winding for one step (closed or open) a = between start and end of a fine tap changer winding and between the closed K-contact and any points of the fine tap changer winding for the same phase b = between the fine tap selector contacts for different pha- ses and between the closed K-contact of a phase and any points of the fine tap changer winding for another phase c1 = between any coarse tappings for a phase and the diver- ter switch lead for the same phase c2 = between corresponding open coarse tappings for diffe- rent phases d1 = between closed and adjacent coarse change-over selec- tor contact in a phase d2 = between open adjacent coarse change-over selector contacts in a phase d3 = between start and end of all coarse taps in a phase f = between diverter switch lead and ground Figure 14 Designation and definition of the insulation distances (8997940D) Insulation distances Tap selector size B Tap selector size C Tap selector size D kV kV kV kV kV kV 1,2I50 50 Hz 1,2I50 50 Hz 1,2I50 50 Hz 1 min. 1 min. 1 min. a0 90 20 90 20 90 20 a1 150 30 150 30 150 30 a 265 50 350 82 450 105 b1) 265 50 350 82 450 146 c1 455 127 525 165 590 210 c21) 455 127 525 165 590 215 d1 265 50 350 82 450 105 d2 350 82 450 105 450 105 d3 350 82 450 105 490 120 1) Insulation distance not applicable for single-pole on-load tap-changers Figure 15 On-load tap-changer OILTAP®M with multiple coarse tap selector, rated withstand voltages of the internal on-load tap-changer insulation Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 17 3 Special types 3 Special types 3.1 Parallel bridges for parallel connection of tap selector planes Only for on-load tap-changer OILTAP®M I 802 (803), M I 1203/1503 (see section 3, drawing no. 899598) For current division at the terminal contacts of the tap selector associated tap selector planes are connected in parallel, i.e. 2 tap selector planes for on-load tap-changer M I 802 (803), 3 tap selector planes for on-load tap-changer M I 1203 / 1503. Parallel bridges at the tap selector terminals are required if the tap winding is wound in two or more strands and each of these strands taps into terminal contacts of the tap selector. This measure reliably prevents a) carry-over of compensating currents into the tap selector and diverter switch circuits b) arc occurring during commutation at moved tap selector contact bridges c) overvoltages between adjacent tap selector terminals connected in parallel 3.2 On-load tap-changer OILTAP®M I 603 and M I 803 with 3-sector diverter switch On-load tap-changer models M I 603 and M I 803 @@ are supplied with a 3-sector diverter switch, if required. This results in a higher step capacity (see Fig. 10) and/or a higher contact life of the arc-carrying diverter switch contacts. Figure 16 Step capacity (rated step voltages Ui and rated through-currents Iu) for on-load tap-changer M I 603 and M I 803 (8904804D) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 18 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 3 Special types 3.3 On-load tap-changer OILTAP®M I 502 and M II 502 for 16 2/3 Hz On-load tap-changer models M I 502 (single-pole on-load tap-changer for single-phase transformers in any configuration) and M II 502 (two-pole on-load tap-changer for single-phase transformers with center-tap connection) are available for application in traction supply transformers with an operating frequency of 16 2/3 Hz. The on-load tap-changers are equipped with a special diverter switch. The tap change operation sequence and the dimensioning of the transition resistors are adapted to an operating frequency of 16 2/3 Hz (technical data are available on request). 3.4 Two-pole on-load tap-changer OILTAP®M II 352/502/602 On-load tap-changer M II 352/502/602 is available as a two-pole on-load tap-changer for single-phase center-tap connection with technical specifications corresponding to on-load tap-changer M III 350 Y, M III 500 Y or M III 600 Y (see dimensional dra- wings, section 4). On-load tap-changer combination for delta connection (example) On-load tap-changer M II 352 can also be used in conjunction with single-pole on-load tap-changer M I 351 as a two-column on-load tap-changer combination (M I 351/M II 352) for voltage regulation of transformer windings with delta connection (cor- respondingly with M I 501/M II 502 and M I 601/M II 602). This combination is referred to as M III K, see Figure 17. The tap windings must be based on Figure 17. Figure 17 On-load tap-changer combination M III K for delta connection: M I 351/M II 352 (a - M I 351, b - M II 352) 3.5 On-load tap-changer OILTAP®M III 350 Y...M I 1503 for linear voltage regulation, up to 34 operating positions The high number of operating positions is achieved without change-over selectors through doubling of the tap selector contact planes compared with the standard version (leading to extended installation length). The on-load tap-changers are available for Um = 72.5... 300 kV and several tap selector sizes (rated withstand voltages and di- mensional drawings are available on request). Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 19 4 Annex 4 Annex 4.1 OILTAP®M III 350/500/600 Y-0/W/G (8997102E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 20 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.2 OILTAP®M II 352/502/602-0/W/G (8997112E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 21 4 Annex 4.3 OILTAP®M I 351/501/601-0/W/G (8980025E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 22 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.4 OILTAP®M I 802-0/W/G (8997122E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 23 4 Annex 4.5 OILTAP®M I 1203/1503-0/W/G (8997132E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 24 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.6 OILTAP®M III K - 0/W/G (7275470E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 25 4 Annex 4.7 OILTAP®M III 600 Y with multiple coarse tap selector (8995943E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 26 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.8 OILTAP®M I 601 with multiple coarse tap selector (8995913E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 27 4 Annex 4.9 OILTAP®M I 802 with multiple coarse tap selector (8995923E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 28 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.10 OILTAP®M I 1203/1503 with multiple coarse tap selector (8995933E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 29 4 Annex 4.11 OILTAP®M I 351...1503, RM I 601...1502 - tie-in resistors with/without potential switch (8986902E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 30 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.12 OILTAP®M II - tie-in resistors with/without potential switch (8986912E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 31 4 Annex 4.13 OILTAP®M III Y, RM III Y - tie-in resistors with/without potential switch (8986922E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 32 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.14 OILTAP®M I 351...1503, RM I 601...1502 - ins. cylinder with potential switch without tie-in resistor (8988043E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 33 4 Annex 4.15 Supplementary drawings for on-load tap-changers (8980125E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 34 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.16 OILTAP®M - installation drawing for centric drive unit (893978BE, sheet 1) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 35 4 Annex 4.17 OILTAP®M - installation drawing for centric drive unit (893978BE, sheet 2) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 36 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.18 On-load tap-changer head, centric drive unit (893899CE) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 37 4 Annex 4.19 OILTAP®M, MS, R, RM - on-load tap-changer head versions (7200261E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 38 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.20 OILTAP®M, MS, R, RM - swivelling range of the gear unit (7200272E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 39 4 Annex 4.21 OILTAP®M - oil compartment contact screening (7303360E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 40 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.22 Tap selector contact arrangement - no. of contacts per plane 10...22 (8980133E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 41 4 Annex 4.23 Mounting position of the tap selector terminals (8904778E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 42 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.24 OILTAP®M, RM, VACUTAP®VRC/VRE - connection cables 3W, 1G, 3G (7235901E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 43 4 Annex 4.25 OILTAP®M and VACUTAP®VRC/VRE - fine tap selector and change-over selector screening (7303350E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 44 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.26 OILTAP®M I 802/8031203/1503 - bridges for parallel connection of tap selector terminals (8995981E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 45 4 Annex 4.27 OILTAP®M, MS, RM - horizontal drive shaft, centric drive unit (8938968E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 46 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.28 OILTAP®M III 350/500/600 Y - tap selector winding (8911073E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 47 4 Annex 4.29 OILTAP®M I 351/501/601 - tap selector winding (8911086E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 48 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.30 OILTAP®M I 1203/1503 - tap selector winding (8911094E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 49 4 Annex 4.31 OILTAP®M I 802 (8911103E) - tap selector winding Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 50 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.32 Special version for bell-type tank installation (8967629E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 51 4 Annex 4.33 OILTAP®M, MS, R, RM with flange for pressure relief valve (8951686E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 52 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.34 Tap selector bottom with additional screening - reversing change-over selector version (8939341E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 53 4 Annex 4.35 Tap selector bottom with additional screening - coarse change-over selector version (8939351E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 54 ©Maschinenfabrik Reinhausen GmbH 2007 050/03/01/0 4 Annex 4.36 Tap selector bottom with hole D20 and D13 (7256491E) Operating Instructions BA 050/03 OILTAP®M The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration. 050/03/01/0 ©Maschinenfabrik Reinhausen GmbH 2007 55 www.reinhausen.com ©Maschinenfabrik Reinhausen GmbH Telefon: +49 (0)941 4090 0 Falkensteinstraße 8 Telefax: +49 (0)941 4090 111 93059 Regensburg E-Mail: [email protected] TD 050/03 en 0108/500 050/03/01/0 F0018602 Printed in Germany

BAL_1800050_03_001_1_EN.pdf

Document Details

Tags

Related

Full Transcript

Upgrade to continue