VOL 1 URES.docx

Unit Review Exercises ===================== Do not return your answer sheet to the AFCDA. --------------------------------------------- 1. \(001) What is outlined in Air Force Instruction (AFI) 36--2101, *Classifying Military Personnel (Officer and Enlisted)*? a. Duties and responsibili...

Unit Review Exercises ===================== Do not return your answer sheet to the AFCDA. --------------------------------------------- 1. \(001) What is outlined in Air Force Instruction (AFI) 36--2101, *Classifying Military Personnel (Officer and Enlisted)*? a. Duties and responsibilities for the Air Force Reserve and Air National Guard *only*. b. Duties and responsibilities for each Air Force career field or specialty. c. Career progression for the materiel management career field. d. Career progression for each military service agent. 2. \(001) Materiel management specialists are *not* responsible for e. providing support to maintenance activities. f. directing policy and guidance for career field. g. researching and identifying materiel requirements. h. preparing, analyzing, and evaluating reports, procedures, and policy data. 3. \(002) The purpose of the Air Force Logistics Career Broadening Program is to promote a better understanding of the whole materiel management system through the cross-utilization of training, knowledge, experience, and i. interfaces. j. processes. k. perspectives. l. provisioning. 4. \(002) To be eligible for the Logistics Career Broadening Program, you must be a technical sergeant or master sergeant with *less than* how many years of time-in-service? m. 9. n. 11. o. 13. p. 15. 5. \(002) What two organizations provide wholesale logistics experience for selected materiel management noncommissioned officers (NCO)? q. Air Force Materiel Command (AFMC) and General Services Administration (GSA). r. Defense Logistics Agency (DLA) and AFMC. s. GSA and Materiel Management System. t. Materiel Management System and DLA. 6. \(003) Which Expeditionary Logistics 21st Century (*e*Log21) effect ensures logistics decisions are made and actions are taken with an understanding of their impact across the entire Air Force? u. One: Enterprise View. v. Two: Integrated Processes. w. Three: Optimized Resources. x. Four: Integrated Technology. 7. \(003) In support of the Expeditionary Logistics 21st Century's (*e*Log21) Integrated Processes, which is *not* a resource? y. Financial. z. Acquisition. a. Technology. b. Infrastructure. 8. \(004) Which source of supply provides wholesale support to all government agencies? c. General Services Administration (GSA). d. Air Force Materiel Command (AFMC). e. Defense Logistics Agency (DLA). f. Local manufacturers. 9. \(004) Local manufacture is a term that describes an item g. designed by a local commodity center. h. sourced from another branch of service. i. fabricated by a maintenance activity on base. j. purchased by an organization using the government purchase card (GPC). 10. \(004) Which section gives maintenance repair functions in a single facility? k. Local purchase (LP). l. Local manufacture (LM). m. Defense Logistics Agency (DLA). n. Centralized repair facility (CRF). 11. \(004) Who serves as the *primary* point of contact for interfacing with the Air Force Sustainment Center (AFSC) on behalf of maintenance customers? o. Flight Service Center. p. Centralized Repair Facility. q. Defense Logistics Agency (DLA). r. Decentralized materiel support (DMS). 12. \(004) Who is required to notify the flightline expediter of all back ordered parts in accordance with AFI 21--101? s. Decentralized materiel support (DMS) personnel. t. Individual Protective Equipment (IPE) personnel. u. Document Control personnel. v. Storage and Issue personnel. 13. \(004) Which references govern the Repair Network Integration (RNI) process? w. Air Force Instruction (AFI) 21--177 and Air Force Manual (AFMAN) 21--188. x. AFI 20--117 and AFMAN 20--118. y. AFMAN 21--112 and AFI 21--113. z. AFMAN 20--122 and AFI 20--133. 14. \(005) What *best* describes supply Class I items? a. Petroleum, oil, and lubricants (POL). b. Subsistence. c. Construction. d. Ammunition. 15. \(005) Which class of supply includes weapons? e. II. f. IV. g. VI. h. VIII. 16. \(005) Which class of supply consists of ammunition? i. III. j. V. k. VII. l. IX. 17. \(005) What *best* describes supply Class III items? m. Subsistence. n. Ammunition. o. Construction. p. Petroleum, oil, and lubricants (POL). 18. \(005) What *best* describes supply Class VI items? q. Ammunition. r. Major end items. s. Medical materiel. t. Personal demand items. 19. \(005) Which class of supply consists of major end items? u. II. v. IV. w. VI. x. VII. 20. \(005) Which class of supply consists of medical materiel? y. VII. z. VIII. a. IX. b. X. 21. \(005) What *best* describes supply Class X items? c. Repair parts. d. Major end items. e. Medical materiel. f. Materiel to support nonmilitary programs. 22. \(005) What provides a unique framework that links performance metrics, processes, best practices, and people into a unified structure? g. Supply-chain operations reference (SCOR). h. Air Expeditionary Forces (AEF). i. Unit type code (UTC). j. Operation plan. 23. \(006) Which specialized center is the hub for the integration and management of maintenance/supply chain capabilities? k. Air Force Test Center (AFTC). l. Air Force Research Laboratory (AFRL). m. Air Force Sustainment Center (AFSC). n. Air Force Nuclear Weapons Center (AFNWC). 24. \(006) The Air Force Sustainment Center's (AFSC) mission is to o. provide research and technology development. p. validate and improve weapon system capabilities. q. provide acquisition management for weapon systems. r. sustain weapon system readiness to generate airpower for America. 25. \(006) How many primary subordinate units (PSU) make up the foundation of the Air Force Installation & Mission Support Center (AFIMSC)? s. Six. t. Seven. u. Four. v. Five. 26. \(007) Which maintenance process updates various basic and support records, such as item records, routing identifier records, and warehouse locations? w. Interchangeable and substitute group (I&SG). x. Miscellaneous file maintenance. y. Follow-up. z. Status. 27. \(007) Which type of reports provide information about the overall management of the supply system? a. Daily. b. Monthly. c. Quarterly. d. Utility. Unit Review Exercises ===================== Do not return your answer sheet to the AFCDA. --------------------------------------------- 49. \(016) The operating principle of no-profit/no-loss *best* describes the a. management analysis programs. b. Office of Management and Budget (OMB). c. Air Force working capital fund (AFWCF). d. Supply Management Activity Group-Retail (SMAG-R). 50. \(016) When the cost of an item is transferred from the customer's funds into the Supply Management Activity Group-Retail (SMAG-R) account, what type of fund is created? e. Debit. f. Saving. g. Storing. h. Revolving. 51. \(016) Which is *not* a division within the Supply Management Activity Group-Retail (SMAG-R)? i. Medical-Dental. j. General Support. k. United States Air Force Academy. l. Air Force working capital fund (AFWCF). 52. \(016) Which item falls under the scope of the Consolidated Sustainment Activity Group-Supply (CSAG-S)? m. Base-managed expense items. n. Wholesale-managed items. o. War reserve materiel (WRM). p. Classified materiel. 53. \(017) The quality assurance (QA) program helps identify any area, program, or equipment and system that is *not* compliant with q. guidelines. r. principles. s. standards. t. quality. 54. \(017) Which section has oversight of the self-inspection program? u. Training. v. Quality assurance (QA). w. Customer support. x. Resource management. 55. \(017) Who selects highly experienced materiel management personnel for customer support visits? y. Logistics readiness squadron (LRS) leadership. z. Supply Management Activity Group (SMAG). a. Customer support section. b. Training section. 56. \(018) When the materiel management system does *not* process or update transactions as it should, which Air Force form is used to report the problem? c. 1810, Assurance Activity. d. 1815, Difficulty Report (DIREP) Worksheet. e. 1820, Supply Management Report. f. 1825, Supply Command. 57. \(018) Which activity within the Air Force Materiel Command (AFMC) supply chain management --retail (SCM-R) community is responsible for submitting, controlling, and monitoring difficulty reports? g. Stock control. h. Quality assurance (QA). i. Computer operations. j. Information technology. 58. \(018) A category III difficulty report does *not* stop computer system processing and is corrected k. as workload permits. l. in the next scheduled release. m. on an Air Force suggestion form. n. over the phone with the materiel management system control center. 59. \(019) Which analysis method do you use most often for recurring reports or for comparing statistical data with standards and norms? o. Trend analysis. p. Special studies. q. Problem analysis. r. Document analysis. 60. \(019) Which analysis method do you use most often to satisfy a one-time requirement or solve a specific problem? s. Trend analysis. t. Special studies. u. Problem analysis. v. Document analysis. 61. \(019) Who works with logistics readiness squadron (LRS) quality assurance (QA) to develop local programs for solving problems identified by management? w. Training. x. Stock control. y. Customer service. z. Resource management. 62. \(019) What section of the materiel management analysis program is tasked with assigning meaning to raw data and providing information that can be used to determine the account's effectiveness? a. Training. b. Customer service (CS). c. Quality assurance (QA). d. Resource management (RM). 63. \(019) What is used to help logistics readiness squadron (LRS) leadership know what an organization has done in the past and how it is doing at the present before directing future efforts? e. Analysis program. f. Difficulty reports (DIREP). g. Training requirements. h. Customer support visits. Unit Review Exercises ===================== Do not return your answer sheet to the AFCDA. --------------------------------------------- 64. \(020) Which is *not* an example of a source document? i. Issues. j. Receipts. k. Reports. l. Returns. 65. \(020) Which is *not required* when comparing information between the document control record (DCR) and source document? m. System designator. n. Nomenclature. o. Stock number. p. Quantity. 66. \(020) How often does document control perform a validation of who is authorized to receipt for classified property? q. Monthly. r. Quarterly. s. Semiannually. t. Annually. 67. \(020) What type of materiel management source documents are *not* placed in a permanent document file? u. Transaction identification codes (TRIC) FIC and FCU. v. Source documents with file indicator D. w. TRIC FCU. x. TRIC FIC. 68. \(020) How long are transactions retained when documents are processed through the materiel management automated tracking system? y. 12 months. z. 24 months. a. 48 months. b. 75 months. 69. \(020) When does a document become delinquent after processing the information from the document control record (DCR) document? c. 6th calendar day. d. 10th calendar day. e. 6 months. f. 1 year. 70. \(020) How often does document control hold a meeting to discuss document delinquent status? g. Daily. h. Monthly. i. Quarterly. j. Annually. 71. \(021) Which materiel management register may be prepared to replace the Daily Transaction Register (D06)? k. Consolidated Inventory Adjustment Document (IAD) (M10). l. Daily Document Control (D04), part 1. m. Consolidated Transaction (M19). n. Conversion Audit List (R22). 72. \(021) Which materiel management register lists information from the transactions stored in the daily transaction history area of the materiel management database? o. Priority Monitor Report (D18). p. Daily Document Control (D04). q. Consolidated Transaction (M19). r. Consolidated Inventory Adjustment Document (IAD) (M10). 73. \(021) The Consolidated Inventory Adjustment Document (IAD) Register (M10) must contain an entry for each adjustment transaction appearing on what two registers? s. D04 and D05. t. D04 and D06. u. D05 and D08. v. D06 and D08. 74. \(022) What is the purpose of the Shipment-Suspense Program? w. Hold an item that has not been confirmed. x. Determine whether an item is lost. y. Ensure an item has been shipped. z. Put an item on backorder. 75. \(022) All shipments and transfers processed through the logistics readiness squadron (LRS) produce what type of detail? a. Registered Equipment Management (REM) vehicles-only or special-spares. b. Special-purpose recoverables authorized maintenance (SPRAM). c. Shipment-suspense or shipped not credited (SNC). d. Shipment inventory. 76. \(022) Which transaction identification code is used to update the shipment-suspense detail? e. SSC. f. SSG. g. SCG. h. SCS. 77. \(022) Which listing is used to manage delinquent shipment suspense details? i. R04. j. R23. k. R40. l. R43. 78. \(023) Which transaction identification code is used for an automated reverse-post (RVP) transaction? m. 1AM. n. 1CC. o. 1TK. p. 1WC. 79. \(023) What information is required to process an automated reverse-post (RVP) input? q. Transaction serial number, quantity, and type transaction phrase code (TTPC). r. Transaction serial number, quantity, and date. s. Transaction serial number, TTPC, and date. t. Quantity, TTPC, and date.