Vogele Paver Safety Training Level 1 Quiz PDF

Vogele Paver Safety Training Level 1 Quiz 1. What is the purpose of the safety manual? a) To provide instructions on how to safely operate the machine b) To suggest possible ways of dealing with different situations c) To describe the machine's features and functions d) To provide guidelines on main...

Vogele Paver Safety Training Level 1 Quiz 1. What is the purpose of the safety manual? a) To provide instructions on how to safely operate the machine b) To suggest possible ways of dealing with different situations c) To describe the machine's features and functions d) To provide guidelines on maintaining the machine 2. What does the DANGER sign indicate? a) Immediate danger that can cause fatalities or serious injuries b) Possibly dangerous situation that can cause fatalities or serious injuries c) Possibly dangerous situation that can cause minor injuries or damage d) Compliance with certain instructions is of economical importance for the machine's operation 3. What does the CAUTION sign indicate? a) Immediate danger that can cause fatalities or serious injuries b) May cause something to happen c) Possibly dangerous situation that can cause minor injuries or damage d) Compliance is important to me 4. What does the WARNING sign indicate? a) What warning? b) Possibly dangerous situation that can cause fatalities or serious injuries c) This is not a situation that can cause minor injuries or damage d) Compliance is a good thing. 5. What is the responsibility of the machine operator? a) To maintain happiness within the crew b) To adjust the pavement thickness and monitor the paving process c) To operate the machine only if they can see everyone in the vicinity d) To provide first aid immediately in case of accidents 6. What is the purpose of personal protective equipment (PPE)? a) To ensure visibility of gauges and controls b) To protect the machine operator from noise and vibrations c) To prevent injuries while working with hot mix/bitumen emulsion d) To provide immediate first aid in case of accidents 7. What should wear when working with hot mix/bitumen emulsion? a) Wear protective clothing and avoid skin contact,Wear heat-resistant gloves and safety boots b) hockey helmet and shinpads c) apron d) Runners 8. What should be done if an accident occurs with hot bitumen? a) Rub the affected area with your left-over subway sandwich from lunch b) Attempt to fight the injured person all the way to the hospital c) Flush burns of skin with fresh water for at least 10 minutes d) Apply olive oil to the burned area and make a plate of pasta 9. What should be checked daily before starting work your workday with the machine? a) Nothing the machine is good to go b) Recommended daily maintenance and measurements for all wear parts, tires, hoses, fluid levels and damage c) the list of all good restaurants in the area d) The availability of a good book 10. Why is it necessary to wear hearing protection? a) The noise level can exceed 80 dB b) Use suitable lifting equipment for transporting and fitting c) Move them on the screed with screws tightened d) Stand between the screed and road paver 11. What is a danger zone? a) An area where your safety is at risk or could be placed at risk b) An area with limited visibility for a hunter c) An area where people dance the night away d) An area with heavy rock plays all night 12. What is the responsibility of screed operators or look out men? a) To signal when the danger zone is clear before operating the machine b) To operate the machine from the control stand c) To adjust the pavement thickness and monitor the paving process d) To provide first aid immediately in case of accidents 13. What should be done if a pedestrian enters the danger zone, or the machine approaches them? a) Sound the horn and stop the machine immediately b) Continue operating the machine and warn them to move away c) Ask them to signal when the danger zone is clear d) Provide immediate first aid in case of injuries 14. What should be inspected daily for signs of damage? a) The condition of bolted joints, tightening torques and any other damage to the machine b) Your lunch c) The machine operator's visibility d) The condition of your co-worker 15. What should be done if the bolted joints are damaged or deformed? a) Book in machine and replace them with new bolts and nuts b) Remove them immediately and operate without them c) Tighten them with higher torque than specified d) Continue operating the machine and monitor their condition 16. What is the purpose of the work site plan or tail gate meeting? a) To create safe work procedures based on hazards specific to the field b) To inform workers about the nearest first aid facilities c) To monitor the implementation of safe working procedures d) All of the above 17. When should the lookout-men or screed operators maintain a direct line of sight with the machine operator? a) At all times during their tasks b) Only when the machine is moving c) When the machine is in the danger zone d) Only when the machine operator signals