GATE 2024 Mining Engineering (MN) Past Paper PDF

Mining Engineering (MN) General Aptitude (GA) Q.1 – Q.5 Carry ONE mark Each Q.1 If ‘→’ denotes increasing order of intensity, then the meaning of the words [drizzle → rain → downpour] is analogous to [ ______ → quarrel → feud]. Which one of the given options is appropri...

Mining Engineering (MN) General Aptitude (GA) Q.1 – Q.5 Carry ONE mark Each Q.1 If ‘→’ denotes increasing order of intensity, then the meaning of the words [drizzle → rain → downpour] is analogous to [ ______ → quarrel → feud]. Which one of the given options is appropriate to fill the blank? (A) bicker (B) bog (C) dither (D) dodge Page 1 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.2 Statements: 1. All heroes are winners. 2. All winners are lucky people. Inferences: I. All lucky people are heroes. II. Some lucky people are heroes. III. Some winners are heroes. Which of the above inferences can be logically deduced from statements 1 and 2? (A) Only I and II (B) Only II and III (C) Only I and III (D) Only III Page 2 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.3 A student was supposed to multiply a positive real number 𝑝 with another positive real number 𝑞. Instead, the student divided 𝑝 by 𝑞. If the percentage error in the student’s answer is 80%, the value of 𝑞 is (A) 5 (B) √2 (C) 2 (D) √5 Q.4 If the sum of the first 20 consecutive positive odd numbers is divided by 202 , the result is (A) 1 (B) 20 (C) 2 (D) 1/2 Page 3 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.5 The ratio of the number of girls to boys in class VIII is the same as the ratio of the number of boys to girls in class IX. The total number of students (boys and girls) in classes VIII and IX is 450 and 360, respectively. If the number of girls in classes VIII and IX is the same, then the number of girls in each class is (A) 150 (B) 200 (C) 250 (D) 175 Page 4 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.6 – Q.10 Carry TWO marks Each Q.6 In the given text, the blanks are numbered (i)−(iv). Select the best match for all the blanks. (i) (ii) Yoko Roi stands as an author for standing as an honorary (iii) (iv) fellow, after she stood her writings that stand the freedom of speech. (A) (i) out (ii) down (iii) in (iv) for (B) (i) down (ii) out (iii) by (iv) in (C) (i) down (ii) out (iii) for (iv) in (D) (i) out (ii) down (iii) by (iv) for Page 5 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.7 Seven identical cylindrical chalk-sticks are fitted tightly in a cylindrical container. The figure below shows the arrangement of the chalk-sticks inside the cylinder. The length of the container is equal to the length of the chalk-sticks. The ratio of the occupied space to the empty space of the container is (A) 5/2 (B) 7/2 (C) 9/2 (D) 3 Page 6 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.8 The plot below shows the relationship between the mortality risk of cardiovascular disease and the number of steps a person walks per day. Based on the data, which one of the following options is true? 1 Mortality Risk of Cardiovascular Disease 0.8 0.6 0.4 0.2 0 0 5000 10000 15000 20000 Steps/Day (A) The risk reduction on increasing the steps/day from 0 to 10000 is less than the risk reduction on increasing the steps/day from 10000 to 20000. (B) The risk reduction on increasing the steps/day from 0 to 5000 is less than the risk reduction on increasing the steps/day from 15000 to 20000. (C) For any 5000 increment in steps/day the largest risk reduction occurs on going from 0 to 5000. (D) For any 5000 increment in steps/day the largest risk reduction occurs on going from 15000 to 20000. Page 7 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.9 Five cubes of identical size and another smaller cube are assembled as shown in Figure A. If viewed from direction X, the planar image of the assembly appears as Figure B. Figure A Figure B If viewed from direction Y, the planar image of the assembly (Figure A) will appear as (A) (B) (C) (D) Page 8 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.10 Visualize a cube that is held with one of the four body diagonals aligned to the vertical axis. Rotate the cube about this axis such that its view remains unchanged. The magnitude of the minimum angle of rotation is (A) 120° (B) 60° (C) 90° (D) 180° Page 9 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.11 – Q.35 Carry ONE mark Each Q.11 Exposure to loud impulsive noise may lead to (A) Nystagmus (B) Siderosis (C) Tinnitus (D) Stannosis Q.12 In a self-contained closed-circuit breathing apparatus, (A) the exhaled air is released outside the apparatus. (B) the exhaled air is wholly absorbed within the apparatus. (C) CO2 is released outside the apparatus after separating from exhaled air. (D) CO2 from exhaled air is absorbed with a chemical. Q.13 A rectangular mine airway of 2.0 m width and 2.5 m height has a bend with deflection of 𝜋/4 radian. If the radius of curvature of the bend is 4.0 m, the shock factor of the bend is (round off to three decimals) (A) 0.014 (B) 0.024 (C) 0.051 (D) 0.071 Page 10 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.14 In an underground coal mine, two fatalities and three serious bodily injuries occurred during the year 2022. The average daily employment is 1100 and annual working days is 300. The severity index as per DGMS guideline for the mine is (A) 12.32 (B) 25.58 (C) 31.21 (D) 34.63 Q.15 For a geared engine winding system, the man winding cage is placed at its normal position at pit top of the shaft. As per CMR 2017, the minimum space, in m, between the center of the hole of the detaching hook attached to the rope shackle and detaching belt plate is (A) 3.6 (B) 2.4 (C) 1.8 (D) 1.5 𝜋⁄ Q.16 The value of integral, 𝐼 = ∫0 4 𝑐𝑜𝑠𝑥 𝑠𝑖𝑛3 𝑥 𝑑𝑥 is (A) 1 64 (B) 1 16 (C) 1 4 (D) 1 Page 11 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.17 𝑛 𝑠𝑖𝑛5𝑥 The value of lim ( ) is 𝑥→0 𝑠𝑖𝑛3𝑥 (A) 2𝑛 (B) 3𝑛/5 (C) 6𝑛/5 (D) 5𝑛/3 Q.18 The spherical semivariogram model (  (h ) ) is represented by the following expression, where h is the lag distance.  C0 , for h = 0   h h  3   (h) = C0 + (C − C0 ) 1.5 − 0.5  , for 0  h  a   a  a    C , for h  a The parameters 𝐶0 , 𝐶 and 𝑎 are respectively known as (A) nugget, range and sill. (B) sill, nugget and range. (C) sill, range and nugget. (D) nugget, sill and range. Page 12 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.19 In a M/M/1 system, the inter-arrival time of dumpers to a shovel follows exponential distribution with a mean arrival rate of 9 dumpers per hour. The service time of the shovel follows exponential distribution with a mean service rate of 12 dumpers per hour. The probability that exactly one dumper is available to the shovel is (A) 1/16 (B) 3/16 (C) 3/4 (D) 1/4 Q.20 A project network with the sequence of five activities is shown. The crashing costs of activities are Activity A B C D E Duration (week) 5 6 8 3 4 Crashing cost per week (lakh INR) 4.0 2.5 2.0 3.0 4.0 If the project is crashed by one week, the increase in project cost, in lakh INR, is (A) 2.0 (B) 2.5 (C) 3.0 (D) 4.0 Page 13 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.21 Match the following features with the corresponding symbols Feature in mine plan Symbol P 1 Shaft Q 2 Staple shaft R 3 Abandoned shaft S 4 Abandoned staple shaft (A) P → 1; Q →3; R → 4; S → 2 (B) P → 4; Q → 2; R → 1; S → 3 (C) P → 2; Q → 4; R → 3; S → 1 (D) P → 4; Q → 1; R → 2; S → 3 Q.22 If the major (𝜎1 ) and minor (𝜎3 ) principal stresses for a rock element have a 1 relationship as 𝜎3 = − 2 𝜎1, the maximum shear stress is expressed by (A) 4 𝜎 3 1 (B) 3 𝜎 4 1 (C) 1 𝜎 2 1 (D) 1 𝜎 4 1 Page 14 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.23 The ore that is NOT used for commercial extraction of metal is (A) Wolframite. (B) Dolomite. (C) Cassiterite. (D) Uraninite. Q.24 The function of District Mineral Foundation established by state governments in India, is to (A) look after safety aspects of mining operations. (B) approve mining plan. (C) act as an environmental regulatory body. (D) monitor welfare of mining affected people. Page 15 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.25 The percentage Fe and corresponding net value for an iron ore mine is given below Fe (%) Net value (INR per tonne) 58 4000 62 4500 Assuming net value versus grade curve to be a straight line, and mining cost of waste is INR 1000 /m3; the correct representation of stripping ratio, SR (m3/tonne) versus Fe (%) grade curve is (A) 𝑆𝑅 = −3.250 + 0.125 × 𝐹𝑒 (B) 𝑆𝑅 = 3.250 + 0.125 × 𝐹𝑒 (C) 𝑆𝑅 = 3250 + 125 × 𝐹𝑒 (D) 𝑆𝑅 = −3250 + 125 × 𝐹𝑒 Q.26 The magnitude of the curl of the vector 𝐅 = 2𝑥𝐢 + 3𝑦𝐣 + 4𝑧𝐤, is (A) 0 (B) 4 (C) 9 (D) 25 Q.27 An explosive with a density of 1.2 g/cm3 has a heat of explosion equal to 900 cal/g. If the heat of explosion of ANFO with density of 0.8 g/cm3 is 950 cal/g, the bulk strength of the explosive relative to ANFO is _____. (round off up to 2 decimals) Page 16 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.28 A typical 24-hour activity of a mobile crusher plant is shown. The utilization, in %, of the plant, is______. (round off up to 2 decimals) Q.29 A coal washery discharges 300 m3/day of contaminated water in a stream having a flow rate of 0.04 m3/s. The DO level of the stream and the contaminated water are 8.5 mg/L and 4 mg/L, respectively. Neglecting the impact of temperature, the resultant DO, in mg/L, of the stream just after mixing is_______. (round off up to 2 decimals) Q.30 The combined sound pressure level measured at a point in a production bench due to one dumper and one shovel is 95 dB(A). If the sound pressure level of shovel alone is 90 dB(A), the sound pressure level of the dumper alone, in dB(A), at the same point is________, (round off up to 2 decimals) Q.31 The void ratio of an unconsolidated soil heap of volume 1000 m3 is 1.0. If the soil heap is consolidated to a volume of 800 m3, the corresponding void ratio is________. (round off up to 2 decimals) Q.32 For a circular path of radius 300 m, the super elevation is restricted to 0.1 m for a width of 1.6 m. The maximum speed, in m/s, of vehicle to avoid overturn is ____. (round off up to 2 decimals) Page 17 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.33 A scanline survey between points A and B of a rock mass is shown. Consider 𝑅𝑄𝐷 = 100 × (0.1𝜆 + 1) × exp(−0.1𝜆), where, 𝜆 is the frequency of discontinuity per m. The RQD of the rock mass is________. (round off up to 2 decimals) Q.34 In a VCR stope, blast holes of 165 mm diameter are drilled. For the blast hole to behave as a spherical charge, the maximum charge length, in m, is_____. (round off up to 2 decimals) Q.35 A rectangular development heading of dimension 3 m × 2.8 m is to be blasted with holes of 2.4 m in length. If the pull factor is 0.95 and swell factor is 1.20, the volume of blasted rock per round, in m3, is______. (round off up to 2 decimals) Page 18 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.36 – Q.65 Carry TWO marks Each Q.36 Data from two production faces of an open pit iron ore mine are given. Item description Face 1 Face 2 Maximum production capacity (tonne/day) 1600 2000 Fe (%) 63 58 Production cost of ores (in INR/tonne) 1500 1200 Ores from two different faces are blended and supplied with Fe grade not less than 60 %. Based on the demand, the combined production is limited to a maximum of 2500 tonne/day. If the selling price of blended iron ores is INR 4500 /tonne, the optimal production from two faces in tonne/day, for maximizing the profit, respectively are (A) 1000.0 and 1500.0 (B) 1333.3 and 1166.7 (C) 1600.0 and 900.0 (D) 500.0 and 2000.0 Q.37 Four identical districts of a mine are ventilated with a quantity of 3500 m3/min at a fan drift pressure of 1.15 kPa. When one of the districts is sealed off, the change in resultant resistance is 0.072 Ns2 m−8. If the fan is stopped, keeping a district sealed, the quantity through the mine becomes 850 m3/min. The natural ventilation pressure in Pa, is (A) 72.12 (B) 82.28 (C) 105.56 (D) 144.56 Page 19 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.38 1 4 3 Matrix A = 5 2 1 , and B = A − AT , then B is 6 4 3 (A) symmetric. (B) skew symmetric. (C) diagonal. (D) scalar. Q.39 The roof convergence data for 30 days at a monitoring station in a coal mine gallery is given. Day Convergence reading (mm) 0 0 5 4.7 10 11.3 16 19.6 22 28.8 30 34.8 The management decides on a Trigger Action Response Plan (TARP) if the following two premises occur simultaneously. Premise 1: Rate of convergence exceeds 1.5 mm/day between two consecutive measurements. Premise 2: Rate of cumulative increase in convergence exceeds 1.0 mm/day. Identify the day on which TARP is enforced in that gallery. (A) 10 (B) 16 (C) 22 (D) 30 Page 20 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.40 Magnitude of error in the determination of the integral, I using Simpson’s 1/3 rule, taking step length as 1.0 is 3 𝐼 = ∫ (𝑥 3 + 6)𝑑𝑥 1 (A) 0 (B) 1.0 (C) 1.5 (D) 2.0 Q.41 In a closed traverse, ABC, the bearings of two lines AB and BC are given. Line Length (m) Bearing AB 100 90° BC 120 150° The length, in m and bearing of line CA, in degree, respectively, are (A) 190.7 and 303° (B) 190.7 and 240° (C) 160.3 and 240° (D) 160.3 and 303° Page 21 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Match the method of mining with orebody geometry, orebody strength and type of Q.42 supports. Geometry Strength Support Method P. Tabular & L. Strong X. Unsupported 1. Cut and Fill Moderately Steep M. Moderate Y. Artificially 2. Block Caving Q. Tabular & Flat Supported N. Weak 3. Room and Pillar R. Massive and Steep Z. Self-supported (A) P→L→Y→3; Q→N→Z→1; R→M→X→2 (B) P→M→Y→2; Q→N→Z→1; R→L→X→3 (C) P→L→Y→2; Q→M→Z→3; R→N→X→1 (D) P→M→Y→1; Q→L→Z→3; R→N→X→2 Q.43 Vectors a = 2i + 3j − 4k and b = 4i + 2 j + 3k represent the two adjacent sides of a triangle. The magnitude of the area of the triangle and the unit vector perpendicular to both a and b respectively, are (A) 28.93 and 0.58𝐢 − 0.76𝐣 − 0.27𝐤 (B) 28.93 and 17.0𝐢 − 22.0𝐣 − 8.0𝐤 (C) 14.46 and 0.58𝐢 − 0.76𝐣 − 0.27𝐤 (D) 14.46 and 17.0𝐢 − 22.0𝐣 − 8.0𝐤 Page 22 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.44 Water is pumped from a mine sump at the rate of 300 m3/hr to an inverted conical water tank, as shown. The rate of rise in water level in m/min, at the instant water level reaches at 5 m height from bottom of the tank, is ______. (round off up to 2 decimals) Q.45 A thermal power plant has an agreement with three mines M1, M2 and M3 to receive ‘Grade 1’ coal, in the proportion of 60%, 25% and 15%, respectively. The probabilities that a wagon supplied coal to the plant containing below ‘Grade 1’ from mines M1, M2 and M3 are 0.02, 0.03 and 0.04, respectively. On a random check, a sample wagon is found to carry below ‘Grade 1’ coal. The probability that the wagon belongs to mine M1, is ______. (round off up to 2 decimals) Page 23 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.46 A transportation system for carrying ore from stock pile to railway siding through an ore bin is shown. The time between failure of each conveyor belt follows an exponential distribution with mean time between failure of 700 hours. The system is considered to be a ‘success’ if ore transports from stock pile to siding by any combination of belts. The reliability of the system for 350 hours of continuous successful operation, is ______. (round off up to 2 decimals) Polluted air with particulate matters of diameter 50 µm enter with a horizontal Q.47 velocity of 1.0 m/s at a height of 0.5 m from the bottom of a dry settling chamber. The density of the particle is 2000 kg/m3 and dynamic viscosity of the air is 1.8 × 10−5 kg/m-s. Assume streamline flow and the density of air is negligible as compared to particles and uniform horizontal velocity of 1.0 m/s of gas and particles within the chamber. Considering particle settling follows Stoke’s law, the minimum length in m, of the chamber required for settling of the particle at its bottom, is ______. (round off up to 2 decimals) Q.48 In a tacheometry survey, the readings observed are given. Instrument Staff Bearing of Vertical angle Staff Station Station line of sight readings (m) P A 145° +8° 1.2, 1.7, 2.2 B 205° +3° 0.8, 1.2, 1.6 The additive and multiplying constants of the instrument are 0 and 100, respectively. The length of the line AB in m, is ______. (round off up to 2 decimals) Page 24 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.49 The data obtained from an air sample analysis of an old working in a coal mine are given. O2 17.15%, CO2 3.40%, CH4 2.20%, and N2 77.25%. Considering atmospheric air contains O2 20.95%, CO2 0.03%, and N2 79.02%, the percentage of blackdamp in the old working, is __. (round off up to 2 decimals) Q.50 A rectangular face of 2.0 m x 2.5 m dimension is blasted with 20 kg explosive in a 1000 m long drive. One kilogram of explosive produces 2200 cm3 of nitrous fumes. The face is ventilated with a duct, located 10.0 m away from the face, to dilute the fumes. The quantity of air, in m3/s to be circulated for reducing the concentration of nitrous fumes to 5 ppm within a period of 5 minutes, is ____. (round off up to 2 decimals) 𝑉𝑚 𝑞 𝑉−𝑉𝑚 [Use the relation, 𝑡 = 2.303 log + , where t = time, 𝑉𝑚 = volume 𝑄 𝑉𝑚 𝑐 𝑄 of the tunnel over which the mixing of the gases produced at the face, and air delivered by the fan occurs, 𝑐 = concentration at time, t, 𝑉 = volume of tunnel, 𝑄 = quantity of air flow, 𝑞 = total volume of nitrous fumes produced] Page 25 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.51 Data for a centrifugal pump discharging water from a sump to the surface are given. Head, m : 180 Discharge rate, m3/hr : 320 Operating hours per day for 270 days in a year : 14 Operating hours per day for remaining 95 days : 20 Overall efficiency of the pumping system : 0.70 Specific weight of mine water, kN/m3 : 10.20 The annual electrical power consumption in GWh, due to pumping operation, is ______. (round off up to 2 decimals) The root of the function, 𝑓(𝑥) = 𝑥 3 − 2𝑥 2 + 3𝑥 − 1 in the interval [0, 1] using Q.52 bisection method after two iterations, is ______. (round off up to 2 decimals) A Bord and Pillar panel is developed at a depth of 250 m in a flat coal seam. The Q.53 vertical stress gradient is 0.027 MPa/m. If the strength of a square pillar is 12.5 MPa, the extraction ratio of the pillar for a safety factor of 1.5, is ______. (round off up to 2 decimals) A Mohr-Coulomb envelop between shear stress, τ and normal stress, 𝜎𝑛 of a Q.54 sandstone rock is given as 𝜏 = 7.5 + 0.84 𝜎𝑛 (unit of stresses is MPa) A sandstone sample is tested in triaxial mode with confining pressure of 5.0 MPa. The value of the shear stress, 𝜏 in MPa at the failure, is______. (round off up to 2 decimals) Page 26 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) A circular tunnel is constructed at a depth of 100 m. The average unit weight of Q.55 overburden rock is 27.0 kN/m3. If the tangential stress measured at point A located at the horizontal boundary of the tunnel as shown, is 5.0 MPa, the tangential stress at point B in MPa, is______. (round off up to 2 decimals) Page 27 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) A mine worker weighing (W) 600 N lifts an object of 100 N as shown. The 50% Q.56 body weight is applied downward through point A and a force FE is produced parallel to 𝑥 axis by the contraction of erector spinae muscle during lifting. The lumber disc, L (shown by red box) acts as a smooth hinge and keeps the upper body in static equilibrium. Ignore all other forces in the body. The magnitude of the resultant of the reaction forces, in N at the lumber disc, is ______. (round off up to 2 decimals) A solid ball of mass 10 kg is subjected to forces as shown. The magnitude of the Q.57 acceleration in m/s2, is ______. (round off up to 2 decimals) Page 28 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) In an open pit mine, the mineral inventory, prices, costs and capacities are given. Q.58 Mineral inventory Grade interval Tonnage (in million tonne) 0 < Cu% ≤ 0.3 0 0.3 < Cu% ≤ 0.4 5 0.4 < Cu% ≤ 0.5 5 0.5 < Cu% ≤ 0.6 5 0.6 < Cu% ≤ 0.7 5 0.7 < Cu% ≤ 0.8 5 0.8 < Cu% 0 Concentrating cost : INR 3,200/tonne of ore milled Smelting & refinery cost : INR 10,000/tonne of copper metal Selling price : INR 6,50,000/tonne of copper metal Overall recovery : 100% Maximum production capacity : 5 million tonne/annum The mine is operating at 5 million tonne in a year. Considering mining capacity being the only constraint, Lanes’ algorithm (based on profit maximization) is used for determining mill cut-off grade. The total amount of copper produced in million tonne, in the life of the pit, is ______. (round off up to 2 decimals) A longitudinal section of a mined out stope block in a copper mine is shown by the Q.59 shaded portion. For a uniform thickness of the stope block, the percentage of ore recovery, is ______. (round off up to 2 decimals) ___ Page 29 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) The real rate of return from a mining project is 14%. If the inflation rate over the Q.60 entire life of the mine is 5.5 %, then the nominal rate of return in %, is ______. (round off up to 2 decimals) In an opencast coal mine, blast vibrations are measured at two locations, A and B Q.61 simultaneously for a maximum charge per delay (Q) of 1200 kg as given. Location Distance from the blast face, D (m) PPV (mm/s) A 100 112.5 B 300 20.3 Assume the relation −𝛽 𝐷 𝑃𝑃𝑉 = 𝐾 [ ] √𝑄 where, 𝐾 and 𝛽 are site constants. The PPV in mm/s, at a distance of 200 m from the blast face, is ______. (round off up to 2 decimals) A 35.0 kW motor transmits power to a pulley of 600 mm diameter, which rotates at Q.62 400 rpm to drive a flat belt. The tension in the tight side is 2.5 times of the slack side. Neglect all transmission losses. If the maximum allowable tension is 8.0 N per mm of belt width, then the minimum width of the belt in mm, is ______. (round off up to 2 decimals) Page 30 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) A 1.2 m diameter drum winding system is shown. One of the winding ropes will be Q.63 replaced for the manwinding cage. Consider the following: 1) A new rope is recapped once at least in every 6 months and a length of 2 m including existing capping is to be cut off from the rope before recapping. 2) The maximum life of a rope is 3.5 years and at least 2 rounds of rope should remain on the drum while the descending cage lands at the bottomost landing point. 3) No overwinding will take place during the maximum life of the new rope. Neglecting the impact of fleet angle on the length of the rope, the minimum length, in m, of new winding rope is ______. (round off up to 2 decimals) Page 31 of 32 Organizing Institute: IISc Bengaluru  Mining Engineering (MN) Q.64 For a continuous miner (CM) panel, the following data are given. Data related to CM Dimension of a working face : 5.0 m (width) x 3.0 m (height) Web depth, m : 0.6 Time for one web cut up to full height, min : 9 Data related to shuttle car Bucket capacity of shuttle car, tonne : 10 Fill factor : 0.9 Number of cars :2 Cycle time of each car including loading, travel and unloading, min :6 Assume, unit weight of coal is 1.4 tonne/m3 and its swell factor is 1.2. Consider, 6 working hours per shift. The non-working time in min, in working hours per shuttle car to dispatch all coal cut by the CM, is ______. (round off up to 2 decimals) In a development coal face, 12 holes are drilled and charged with explosive. Holes Q.65 are initiated with electric delay detonators connected in series. The length of a detonator lead wire is 1.5 m. The length of the blasting cable is 120 m. Data are as given: Resistance of each detonator : 1.48 Ω Resistance of lead wire : 0.04 Ω/m Resistance of one wire of the blasting cable : 0.009 Ω/m The total resistance of the circuit in Ω, is ______. (round off up to 2 decimals) Page 32 of 32 Organizing Institute: IISc Bengaluru