Residential Carpentry 1 Past Assignment PDF

Student: _____________________ Instructor: Cory Sears Assignment: M2: Trade Terms (27102) Date: _____________________ Course: Residential Carpentry 1 (5) 1...

Student: _____________________ Instructor: Cory Sears Assignment: M2: Trade Terms (27102) Date: _____________________ Course: Residential Carpentry 1 (5) 1. Fill in the blank with the correct term learned from your study of this module. 1. The main ingredient in plaster and gypsum board is​__________. (1) 2. After installing finishing​nails, use​a(n) __________ to recess the nails and then fill the holes with (2) putty. 3. Crown molding is a type of​__________. (3) 4. The​__________ describes safe handling methods for a particular substance. (4) 5. The roof sheathing is attached to the​__________. (5) 6. Use​__________ nails to prevent rusting. (6) 7. A floor is supported by equally spaced​__________. (7) 8. When two​square-cut pieces of material are placed​end-to-end, it is called​a(n) __________. (8) (1) Butt joint Millwork (2) Butt joint Nail set Galvanized Nail set Gypsum Rafters Gypsum Safety data sheet (SDS) Joists Safety data sheet (SDS) Joists Millwork (3) Butt joint Nail set (4) Galvanized Nail set Galvanized Rafters Gypsum Rafters Joists Safety data sheet (SDS) Joists Safety data sheet (SDS) Millwork Millwork (5) Butt joint Nail set (6) Butt joint Millwork Galvanized Rafters Galvanized Nail set Gypsum Safety data sheet (SDS) Gypsum Safety data sheet (SDS) Millwork Joists (7) Butt joint Millwork (8) Butt joint Nail set Galvanized Rafters Galvanized Rafters Gypsum Safety data sheet (SDS) Gypsum Safety data sheet (SDS) Joists Joists