Jeopardy CST8208 Final Review Part 1 PDF

 More Laser General Audio Laser Printers Booting Printers Printer Stuff Adapters 10 10 10 10 10 20 20 20 20 20...

 More Laser General Audio Laser Printers Booting Printers Printer Stuff Adapters 10 10 10 10 10 20 20 20 20 20 30 30 30 30 30 40 40 40 40 40 50 50 50 50 50  Question 1 - 10 This is the “ink” used in a laser printer  Answer 1 – 10 Toner  Question 1 - 20 This is the fourth step in the laser printing process during which toner is attracted to some portions of the photosensitive drum  Answer 1 – 20 Developing  Question 1 - 30 The primary corona is used in this step of the laser printing process  Answer 1 – 30 Charging/conditioning  Question 1 - 40 This component of a laser printer alters the charge on the photosensitive drum  Answer 1 – 40 The laser  Question 1 - 50 A doctor blade or control blade is used with this cylinder to limit the amount of toner used for printing  Answer 1 – 50 Developing cylinder  Question 2 - 10 This is the reason that toner is attracted to portions of the photosensitive drum that are hit by the laser  Answer 2 – 10 Those areas are more positive than the areas that aren’t hit by the laser (and more positive than the toner)  Question 2 - 20 This provides a small charge to the paper as it enters the laser printer  Answer 2 – 20 Transfer corona or transfer roller  Question 2 - 30 This is what bonds the toner to the paper  Answer 2 – 30 Fuser  Question 2 - 40 This is the name of the first step of the printing process  Answer 2 – 40 Processing  Question 2 - 50 An erasure lamp is used during this step of the laser printing process  Answer 2 – 50 Cleaning  Question 3 - 10 This type of printer is capable of printing carbon copy forms  Answer 3 – 10 Dot matrix (impact printer)  Question 3 - 20 These are the two modes that dot matrix printers can print in  Answer 3 – 20 Font Mode and Dot Addressable Mode  Question 3 - 30 This type of printer uses liquid ink sprayed through nozzles  Answer 3 – 30 Ink Jet  Question 3 - 40 In ink jet printers, the drop on demand method can be further broken down into these two types of drop on demand ink delivery methods  Answer 3 – 40 Thermal Piezoelectric  Question 3 - 50 These are the two methods dot matrix printers use to advance the paper  Answer 3 – 50 Tractor feed and friction feed  Question 4 - 10 This is the main processor of a sound card  Answer 4 – 10 DSP  Question 4 - 20 This type of compressed sound file removes sounds humans can’t hear  Answer 4 – 20 Lossy (ex. MP3)  Question 4 - 30 This is the colour of the 3.5 mm microphone connector on a sound card  Answer 4 – 30 Pink  Question 4 - 40 While PCs can typically use a discrete add-on sound card inserted into an expansion slot, most systems instead use this.  Answer 4 – 40 Audio adapter integrated in the motherboard  Question 4 - 50 This is the number of speakers in a 7.1 surround sound system  Answer 4 – 50 8 (including subwoofer)  Question 5 - 10 This is the name of the set of tests and checks a computer performs on itself at boot  Answer 5 – 10 POST (Power On Self Test)  Question 5 - 20 This is the name of a small program stored in your system ROM that allows a computer to start and load an OS  Answer 5 – 20 Bootstrap loader  Question 5 - 30 This is the type of boot that occurs if a system has been completely shut off before being turned back on  Answer 5 – 30 Cold boot  Question 5 - 40 This is the name of the data that’s stored in the CMOS that contains information about the last successful boot  Answer 5 – 40 ESCD (Extended System Configuration Data)  Question 5 - 50 This is the name of the signal sent by the power supply very early in the boot process and that must remain constant in order for a PC to continue to function  Answer 5 – 50 Power good signal