photo.jpg
Transcript
## Fastener Recommendations The company did not approve of the method. It is recommended to use the following data: * Use.38 caliber fasteners * Use no less than 14-in diameter shank by 3/8-in threaded studs, attaining a minimum 2-in penetration * This fastening system is designed to provide 4,360...
## Fastener Recommendations The company did not approve of the method. It is recommended to use the following data: * Use.38 caliber fasteners * Use no less than 14-in diameter shank by 3/8-in threaded studs, attaining a minimum 2-in penetration * This fastening system is designed to provide 4,360 lb of resistance in the shear mode, as this is being used. * Provides more than a 10:1 safety factor against the approximately 385 lb of nozzle reaction produced by a 1 3/4-in. tip flowing at 80 psi nozzle pressure. * If conditions permit, other anchoring methods should be used. This idea is intended for use only when you are out of options and the fire is roaring through the building.