Measuring Horizontal Distance in Inclined Land Surveying Test

<p>الشخص الثاني</p> Signup and view all the answers

<p>ضبط ارتفاع شريط القياس</p> Signup and view all the answers

<p>Tape = Measuring the actual distance on inclined ground Ranging Rod = Installing at the top and bottom of the slope for distance determination Arrow = Fixing at the starting point for tape measurement Plumb-bob = Ensuring vertical alignment of the tape while measuring</p> Signup and view all the answers

<p>Step A = Determining a distance on inclined ground by installing ranging rods at the top and bottom of the slope Step B = Determining the straightness of the line by installing a third ranging rod in the middle of the distance Step C = Working from top to bottom, placing zero of the measuring tape at the top point and fixing an arrow Step D = Directing the observer to ensure collinearity of points and pulling the tape horizontally using a hand level</p> Signup and view all the answers

<p>Irregular slope = A slope with varying steepness or incline throughout its length Regular slope = A slope with consistent steepness or incline throughout its length Collinear points = Points that lie on the same straight line Hand level = Used to ensure the tape is horizontal while measuring on sloping ground</p> Signup and view all the answers

<p>Tape = Used for direct measurement of distance on sloping ground Ranging Rod = Installed at top and bottom points for determining distance and ensuring straightness Arrow = Fixed at starting point for holding the tape during measurement Hand level = Used to ensure horizontal alignment of the tape while measuring on sloping ground</p> Signup and view all the answers

<p>Installing ranging rods at top and bottom points = Determining distance on inclined ground Determining straightness of the line by installing a third ranging rod = Ensuring accuracy of measurement by verifying collinearity of points Placing zero of the measuring tape at starting point and fixing an arrow = Preparing for direct measurement and ensuring alignment Directing the observer and using a hand level to pull the tape horizontally = Ensuring accuracy and horizontal alignment during measurement</p> Signup and view all the answers