Mastering Standard Instrument Departures
6 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

According to the text, what is the standard design gradient for departure procedures?

  • 5%
  • 10%
  • 3.3% (correct)
  • 2.2%
  • What is the maximum distance within which track guidance is acquired for conventional straight departures?

  • 10.0 km
  • 20.0 km (correct)
  • 10.8 NM
  • 5.4 NM
  • When is a departure route referred to as a turning departure?

  • When the altitude/height reaches at least 120 m (394 ft)
  • When the departure route requires a turn of more than 15° (correct)
  • When turns are made at a point 600 m from the beginning of the runway
  • When the initial departure track is within 15° of the alignment of the runway centerline
  • According to the text, what is the earliest point at which a turn may be initiated for Category H procedures?

    <p>At the beginning of the runway FATO</p> Signup and view all the answers

    According to the text, what is the maximum speed used for departure turns, unless otherwise annotated on the procedure?

    <p>Final missed approach speed increased by 10%</p> Signup and view all the answers

    In exceptional cases, where acceptable terrain clearances cannot be provided, what is the maximum speed for turning departure routes constructed?

    <p>Intermediate missed approach speed increased by 10%</p> Signup and view all the answers

    More Like This

    Instrument Departure Procedures (DPs)
    12 questions
    ATPL Departure Procedures Quiz
    26 questions
    Use Quizgecko on...
    Browser
    Browser