Spring Fire Department Staging for Law Enforcement PDF, 2018

Summary

This document details Spring Fire Department policies and procedures for staging during emergency medical service incidents involving law enforcement. It outlines the responsibilities of personnel, communication protocols, and staging area considerations. The document also addresses time limits and vehicle restrictions for incident response.

Full Transcript

Manual Name: Document Number: Spring Fire Department Policies & Procedures SFD.062 Document Title: Date: 06/13/2018 Staging for Law Enforcement C...

Manual Name: Document Number: Spring Fire Department Policies & Procedures SFD.062 Document Title: Date: 06/13/2018 Staging for Law Enforcement Chief’s Signature: Revision Number: 01 PURPOSE To provide all members of the Spring Fire Department with information and procedures when dispatched and responding to emergency medical service incidents that involve staging. SCOPE All Spring Fire Department personnel are responsible for knowing and complying with this procedure. REVIEW The Fire Chief or designee is responsible for reviewing this guideline annually and assuring its accuracy. GUIDELINE North Comm/TECC will determine if staging procedures are required based on information obtained from the 911 call. The North Comm/TECC will notify responding units by radio to stage for law enforcement. A TAC Channel will be assigned for the incident by North Comm/TECC. Unit(s) shall respond non-emergency to a staging area, determined by the apparatus officer or incident commander. Consideration should be given to have the staging area within a proximity of a minimum of 0.5 miles of the dispatched location. This distance may be increased based on the type of threat to responders and availability of safe staging areas. If any unit(s) are cleared into the scene, prior to the arrival of the other units, all remaining units shall upgrade to emergency traffic. All responding unit(s), shall communicate via radio, the staging location. The location should be far enough away from the scene that units are not visible from the scene. Unit(s) shall verbalize “staged at (give location),” via radio upon arrival at the staging area. If a prior arriving unit is staged but did not voice their staging location, the responding apparatus should look at their location via the mapping software and stage at the same location. Unit(s) shall remain at the staging area until cleared into the scene by North Comm/TECC or law enforcement units on scene. North Comm/TECC should remain in contact with law enforcement throughout the incident, provide the staging location of Fire and EMS units, and document all time references. Page 1 of 2 Manual Name: Document Number: Spring Fire Department Policies & Procedures SFD.062 Document Title: Date: 06/13/2018 Staging for Law Enforcement Revision Number: 01 Unit(s) shall remain at the staging area for a time not to exceed 30 minutes from time of dispatch. When stage time expiration occurs, units(s) shall advise via radio transmission that they are returning to service: (example) “E71 returning to service without patient contact; cleared the staging area.” No personal vehicles are to respond to any incident that requires staging for law enforcement. This is to include any gunshot wounds (shootings), stabbings, assaults, or overdose whether the fire department is requested to stage or not. Page 2 of 2

Use Quizgecko on...
Browser
Browser