rpp20.pdf

Catalog Number: Date: Project: OVERVIEW nLight AIR rPP power packs are designed to offer flexible control for commercial and industrial lighting applications. The rPP consists of a re...

Catalog Number: Date: Project: OVERVIEW nLight AIR rPP power packs are designed to offer flexible control for commercial and industrial lighting applications. The rPP consists of a relay, 0-10V dimming control, and a low voltage power supply output to power and wireless sensors. The rPP is capable of switching loads up to 20 A via a latching relay designed with robust inrush protection. Select power packs provide +24VDC low voltage output to power up to 4 nLight AIR mounted occupancy sensors and photocells. The nLight AIR rPP is designed for use as part of an nLight AIR group of devices or with the nLight ECLYPSE™. POWER PACK FEATURES nLight® AIR On/Off and dimming control of a luminaire or group of luminaires 24VDC output to power up to 4 nLight AIR rCMS low voltage sensors or other low voltage devices rPP20 Suitable for plug load control Power/Relay Pack UL 924 listed options for simplified lighting control on emergency lighting circuits Power Monitoring with Current Measurement +/- 3% accuracy INSTALLATION FEATURES Wireless communication enables simple retrofits - no communication wires to pull between devices Chase nipple or side output dimming options UL 2043 listed for plenum applications An optional external antenna (CP option) for meeting code specific requirements or IP-rated applications Simple app-based configuration of space behaviors ADVANCED WIRELESS FEATURES Devices intercommunicate to provide grouped-response to motion and on/off and dimming response to daylight conditions when wirelessly connected to a motion or daylight sensor, or on/off/dimming when connected to a wireless switch Fully compatible with other nLight AIR devices on the site Easy to integrate with the nLight ECLYPSE, which provides site-wide lighting control through nLight's SensorView software and provides optional BMS integration Comprehensive wireless security Warranty Five-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. Items marked by a shaded background qualify for the Design Select program and ship in 15 days or less. To learn more about Design Select, visit www.acuitybrands.com/designselect. *See ordering tree for details nLight, nLight AIR and the Acuity Controls and Acuity Brands logos are trademarks of Acuity Brands. Bluetooth is a trademark of Bluetooth SIG, Inc. used by Acuity Brands under license. Apple and the Apple logo are trademarks of Apple Inc. Android and Google Play are trademarks of Google, Inc. Other trademarks are property of their respective owners. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com RPP20 © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/26/23 1 of 4  Design Select options indicated by this color background. ORDERING INFORMATION rPP20 Example: rPP20 D 24V EFP G2 Series Dimming and Low Voltage Output Emergency Fault Protection RPP20 nLight AIR [blank] None DS 0-10VDC dimming output [blank] 1 None EFP External Fault Power/Relay Pack (via side leads), no 24V Protection 24V No dimming, 24V Output output terminals ER UL924 Emergency Operation, Terminals via power sense leads DS 24V 0-10VDC Dimming output D 0-10VDC Dimming output (via side leads), 24V Output EM 2 UL924 Emergency Operation, (via chase nipple), no 24V Terminals via separate normal power Output Terminals sensing device D 24V 0-10VDC dimming output (via chase nipple), 24V output terminals Territory Compliance Voltage Power Monitoring Generation [blank] None [blank] 4 120-277V [blank] None G2 Generation 2 compatibility CP 3 Chicago Plenum UVOLT 4 120-480V IM Current Monitoring Notes 1. Can provide normal power sensing information to nLight AIR devices with EM option. See the UL 924 ACCESSORIES Response section for more information. 2. EM option requires an nLight AIR device connected to normal power for wireless normal power detection. NPP FUSE J10 Replacement Fuse See the UL 924 Response section for more information. 3. Not available with UVOLT model. 4. All phase-to-phase applications, including 208VAC and 480VAC, require factory installation. Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com RPP20 © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/26/23 2 of 4 SPECIFICATIONS Size: 3.50" x 3.52" x 1.82" (120-277V model) DC Output Terminals: Push-in Terminals, solid or tinned 16-20AWG 4.725" x 4.80" x 1.865" (UVOLT model) DC Output Voltage/Current: 24 VDC, 100 mA max output Weight: 6 oz 0-10V Dimming: Sinks 150mA; 0-10VDC dimmable ballasts or LED Mounting: 1/2" Knockout drivers; Color: White (standard), Red (ER & EM) Radio Frequencies: 900 MHz up to +20dBM, 2.4 GHz up to +10 dBM Humidity: 5 to 95% non-condensing Wireless Standard: 900 MHz: IEEE 802.15.4-based; 2.4 GHz: Version Location: Damp Location Rating 4.0+ of the Bluetooth specification Wires: Line and load 12 AWG stranded Security: Application Data Encryption AES-128 bit, Mutual Entity Authentication, Message Confidentiality, Neutral, ground, and power sense (ER version) 18 Message Authentication and Replay Prevention, AWG stranded Limited Anonymity 0-10V, 20 AWG stranded Complies with California Civil Code Title 1.81.26, Operating Voltage: 120-277VAC, 120-480VAC (UVOLT) Security of Connected Devices, approved under Relay type: Latching Senate Bill No. 327 (2018) Frequency: 50/60Hz Regulatory Compliance: FCC ID: 2ADCB-RMODIT3 Current Monitoring: MVOLT versions include automatic voltage detection IC: 6715C-RMODIT3 for power calculation. HVOLT versions require user IFETEL: RCPNLNL20-2057 input of voltage via SensorView to calculate power cULus Minimum Current required to ensure +/- 3% Accuracy RoHS MVOLT - 425mA UVOLT - 625mA Temperature and Load Ratings Model rPP20 (-10 to 50 C) rPP20 (-10 to 60 C) rPP20 UVOLT (-10 to 70C) Voltage 120 VAC 277 VAC 120 VAC 277 VAC 120 VAC 277 VAC 347 VAC 480 VAC General Purpose 20 A 20 A 5A 5A 20 A 20 A 20 A 5A Tungsten 20 A 20 A 5A 5A 20 A 20 A 20 A 5A Standard Ballast 20 A 20 A 5A 5A 20 A 20 A 20 A 5A Electronic Ballast 16 A 16A 5A 5A 16 A 16 A 16 A 5A Motor 1.5 HP 1.5 HP 1.5 HP 1.5 HP 1.5 HP 1.5 HP 3/4 HP 1/2 HP WIRING (Do not wire hot) RPP D/DS 24V EFP LOAD Legend RPP D/DS 24V EFP UVOLT GRY PNK * GRY PNK * BLK – Unswitched Hot 120-277, 347VAC** WHT – Neutral BLU – Switched Output RPP DS 24V EFP VIO – 0-10V Dim PNK* – 0-10V Common } RED (Terminal) – +24VDC BLK (Terminal) – DC Common } Normal GRN – Ground +24 VDC * 0-10V Dimming Common from luminaire may be pink or as otherwise indicated per section 410.69 of the 2020 NEC. **347 only supported by UVOLT option. WIRING FOR EMERGENCY (-ER) UNITS RPP D/DS 24V ER EFP UL924 Sequence of Operation: RPP D/DS 24V ER EFP UVOLT Emergency Legend EMERGENCY RED – 120-277, 347VAC** Emergency Hot When normal power sense leads Normal 0-10 VDC Ballast have absence of voltage } WHT/RED – Emergency Neutral or LED Driver Relay is closed and 0-10V dimming is } BLK – Unswitched Norm. Hot GRY PNK* GRY PNK* WHT – Norm. Neutral BLU – Switched Output at high end trim level VIO – 0-10V Dim (+) Device ignores wireless lighting control commands RPP DS 24V ER EFP PNK* – 0-10V Com (-) RED (Terminal) - +24VDC 120 V - BLK (Terminal) - DC Com 277 V } GRN – Ground - Optional Test Switch (by others) +24 VDC * 0-10V Dimming Common from luminaire may be pink or as otherwise indicated per section 410.69 of the 2020 NEC **347 only supported by UVOLT option. Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com RPP20 © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/26/23 3 of 4 WIRING FOR EMERGENCY (-EM) UNITS RPP D/DS 24V EM EFP EMERGENCY Emergency Legend RPP D/DS 24V EM EFP UVOLT BLK - 120-277, 347VAC** Emergency Hot 0-10 VDC Ballast } WHT – Emergency Neutral or LED Driver BLU – Switched Output GRY PNK* GRY PNK* VIO – 0-10V Dim (+) PNK* – 0-10V Com (-) RPP DS 24V EM EFP RED (Terminal) - +24VDC BLK (Terminal) - DC Com 120 V - GRN – Ground } 277 V * 0-10V Dimming Common from luminaire may be pink or as otherwise indicated per section 410.69 of the 2020 NEC +24 VDC **347 only supported by UVOLT option. UL 924 Response – nLight AIR Devices with EM Option The below information applies to all nLight AIR devices with an EM option. EM devices will remain at their high-end trim and ignore wireless lighting control commands, unless a normal-power-sensed (NPS) broadcast is received at least every 8 seconds. Using the CLAIRITY™+ mobile app, EM devices must be associated with a group that includes a normal power sensing device to receive NPS broadcasts. Only non-emergency rPP20, rLSXR, rSBOR, rSDGR, and nLight AIR luminaires with version 3.4 or later firmware can provide normal power sensing for EM devices. See specification sheets for control devices and luminaires for more information on options that support normal power sensing. DIMENSIONS (UVOLT 4.725") 3.50" (UVOLT 4.8") 3.52" REMOTE ANTENNA (CHICAGO PLENUM OPTION) FLEXIBLE CABLE 6.0" RIGID ANTENNA 3.5" (UVOLT 1.865") 1.82" 6.0" 3.5" Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com RPP20 © 2014-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/26/23 4 of 4