Cisco.350-601.vMar-2024.by_.Isin_.200q.pdf

Cisco.350-601.vMar-2024.by.Isin.200q Number: 350-601 Passing Score: 800 Time Limit: 120 Website: www.VCEplus.io File Version: 41.0 Twitter: https://twitter.com/VCE_Plus Exam Code: 350-601 Exam Name: Implementing Cisco Data Center Core Technologies (DCCOR) IT Certification Exams - Questions & Answers | VCEplus.io Exam A QUESTION 1 Refer to the exhibit. What be connected to clear the HA NOT READY status? A. server chassis B. network uplinks C. management ports D. Layer 1-Layer 2 ports Correct Answer: A Section: QUESTION 2 www.VCEplus.io A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area? A. type 7 LSA B. type 3 LSA C. type 1 LSA D. type 5 LSA Correct Answer: A Section: QUESTION 3 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC? A. N7K-1 appears as the STP root. B. N7K-2 appears as the STP root. C. N7K-1 and N7K-2 appear as a single STP root. D. N7K-1 preempts N7K-2 as the STP root. Correct Answer: C Section: www.VCEplus.io QUESTION 4 Refer to the exhibit. What is configured as a result of running these commands? A. reverse lookup for outbound packets B. strict unicast RPF C. loose unicast RPF D. IP Source Guard Correct Answer: B Section: Explanation: https://tools.cisco.com/security/center/resources/unicast_reverse_path_forwardingThe ip verify unicast source reachable-via rx command enables Unicast RPF in strict mode. To enableloose mode, administrators can use the any option to enforce the requirement that the source IP address for a packet must appear in the routing table. QUESTION 5 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io Refer to the exhibit. What happens to the broadcast traffic when it reaches aggregation switches? A. Only Agg-1 switch receives broadcast packets and does not forward to the peer link on Agg-2 switch. B. Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2M and Eth2/5 C. Agg-2 switch receives broadcast packets and stops forwarding to the peer link on Agg-1 switch. D. Agg1 and Agg2 switches receive broadcast packets and does not forward them to me peer link or the port channel Correct Answer: D Section: IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 6 The VMM domain is integrated between Cisco APICs and vCenter using a distributed vSwitch. The traffic must be blocked between a subset of endpoints in an EPG based on specific VM attributes and the rest of the VMs in that EPG. Which set of actions blocks this traffic? A. Option A B. Option B C. Option C D. Option D Correct Answer: A Section: QUESTION 7 www.VCEplus.io An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements: Use unicast for updates. Use decentralized communication of updates. Full adjacency between switches. Which configuration is needed to meet these requirements? A. interface with a type of p2p network B. stub area between the neighbors C. filter list between the neighbors D. virtual link between the neighbors Correct Answer: A Section: QUESTION 8 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io Refer to the exhibit. An engineer must schedule the firmware upgrade of the Red1 and Red2 leaf switches. The requirement is to keep the upgrade time to the minimum, avoid any service impact, and perform the parallel upgrade Which set of scheduler attributes must be used to meet these requirements? www.VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: D Section: QUESTION 9 An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements? A. Type: System configuration Protocol: SCP B. Type: Logical configuration Protocol: TFTP C. Type: All configuration Protocol: FTP D. Type: Full state Protocol: SFTP IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: B Section: QUESTION 10 Refer to the exhibit. www.VCEplus.io Refer to the exhibit. An engineer must configure FCoE between the N9K-A switch and the FCF-A Nexus 9000 core switch. The deployment has these characteristics: The N9K-Aand N9K-B top-of-rack switches share the domain ID of the core switches. The hosts are equipped with converged network adapters. The only VSAN that is permitted to traverse port-channel 100 is VSAN 20. Which configuration completes the FCoE configuration on the N9K-A device? IT Certification Exams - Questions & Answers | VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: C Section: QUESTION 11 www.VCEplus.io A customer undergoes an IT security review assessment. The auditor must have read-only access to the Cisco Nexus 9000 Series Switch to perform the configuration review. The customer implements this security role for the auditor: role name audit rule 1 permit command * rule 2 - Output omitted - username auditor password C4SAFF0B96EB0045$c0 role audit Which configuration snippet must complete the configuration? A. deny command write* B. permit command enable C. permit command show * D. deny command configure terminal Correct Answer: D Section: QUESTION 12 A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L30ut connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured? A. by linking the interface policy group to multiple Attachable Access Entity Profiles B. with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain C. with two interface policy groups that are linked to the same interface profile port selector D. by mapping a single physical domain, mapped to the L3out and EPG interfaces IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: D Section: QUESTION 13 An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal? A. Enable the system to boot with the configured boot order. B. Set the boot configuration directly through BIOS. C. Configure the legacy and precision boot order to be mutually exclusive. D. Apply UEFI Secure Boot for a nonsupported operating system. Correct Answer: A Section: QUESTION 14 Which configuration implements static ingress replication? www.VCEplus.io IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: A Section: IT Certification Exams - Questions & Answers | VCEplus.io Explanation: "Configuring Static Ingress Replication" section here: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/vxlan/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_VXLAN_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_VXLAN_Configuration_Guide_7x_chapter_011.html QUESTION 15 Refer to the exhibit. A. interface Overlay200 otv join-interface Ethernet1/2 www.VCEplus.io otv extend-vlan 178, 2500-2563 otv use-adjacency-server 20.1.1.1 unicast-only B. interface Overlay200 otv join-interface Ethernet1/2 otv extand-vlan 178, 2500-2563 otv adjacency-server unicast-only C. interface Overlay200 otv join-interface Ethernet1/2 otv extend-vlan 178, 2500-2563 D. interface Overlay200 otv join-interface Ethernet1/2 otv extend-vlan 178, 2500-2563 otv use-adjacency-server 20.1.1.1 20.2.1.1 unicast-only Correct Answer: D Section: QUESTION 16 A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and application. Which cloud model meets this requirement? A. PaaS B. MaaS IT Certification Exams - Questions & Answers | VCEplus.io C. IaaS D. SaaS Correct Answer: C Section: Explanation: Traditional IT is responsible for Application, Data, Runtime, Middleware, OS, Virtualization, Servers, Storage, Networking. IaaS = Infrastructure as a Service - is responsible for OS, Virtualization, Servers, Storage, Networking. SaaS = Software as a Service - Software deployed by the cloud provider - is responsible for nothing. PaaS = Platform as a Service - Software can be deployed by the customer building their own application | is responsible for Data and Application. QUESTION 17 Refer to the exhibit. www.VCEplus.io A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch? A. 192.168.254.4 B. 239.255.70.83 C. 192.168.254.1 D. 192.168.254.2 Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/92x/bcisco-nexus-3000-nx-os-interfaces-configuration-guide-92x/b-cisco-nexus-3000-nx-os-interfacesconfiguration-guide- 92x_chapter_0110.html QUESTION 18 Refer to the exhibit. Which result of running the command is true? IT Certification Exams - Questions & Answers | VCEplus.io A. The PIM database is deleted. B. Multicast traffic forwarding is suspended. C. PIM join messages are suspended. D. MRIB is flushed Correct Answer: A Section: Explanation: When you restart PIM, the following tasks are performed: The PIM database is deleted. The MRIB and MFIB are unaffected and forwarding of traffic continues. The multicast route ownership is verified through the MRIB. Periodic PIM join and prune messages from neighbors are used to repopulate the database. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6- x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_Multicast_Routing_Configuration_Guide/b_Cisco_Nexus_9000_Series_NXOS_Multicast_Routing_Configuration_Guide_chapter_011.html QUESTION 19 An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS manager GUI. The file must be in XML format and be exported from Cisco UCS Manager using encrypted method. Which two configuration parameters should be selected to meet these requirements?. (Choose two.) A. Type: Logical configuration B. Protocol SCP C. Type Full state D. Protocol TFTP E. Type All configuration Correct Answer: B, E Section: www.VCEplus.io QUESTION 20 A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.) A. Service Profile Compute (Is-compute) B. Ext LAN Config (ext-lan-security) C. Service Profile Network Policy (Is-network-policy) D. Service Profile Config (Is-config) E. Ext LAN Policy (ext-lan-policy) Correct Answer: B, E Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Privileges/4-1/b-UCSM-Privileges-4_1.pdfNTP can be configured only with EXT LAN Security. VLAN can be added using the following privileges: - Ext Lan Config (ext-lan-config) - Ext Lan Policy (ext-lan-policy) service profiles will add VLANs to vNICs only if they are configured to UCS manager. So service profile is not valid solution. QUESTION 21 IT Certification Exams - Questions & Answers | VCEplus.io A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements? A. Option A B. Option B C. Option C D. Option D Correct Answer: D Section: www.VCEplus.io Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming-config-guide-8x/configuring_san_telemetrystreaming.html QUESTION 22 Refer to Exhibit: An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this? IT Certification Exams - Questions & Answers | VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: B www.VCEplus.io Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/Python_API.html https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/DEVNET-1077.pdf QUESTION 23 www.VCEplus.io A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established? A. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer B. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis/cimc # scope mgmt-conn sideband UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cimc/mgmt-conn* # commit-buffer C. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis /cimc # set mgmt-conn-state enabled UCS-A /chassis /cimc/mgmt-conn* # commit-buffer D. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer Correct Answer: D Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io Example UCS-A# scope server 1 UCS-A /server # scope cimc UCS-A /server/cimc # scope mgm UCS-A /server/cimc # scope mgmt-conn UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn # set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer UCS-A /server/cimc/mgmt-conn https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm3-1/b_CSeries-Integration_UCSM3-1/b_C-Series-Integration_UCSM3-1_chapter_010.html QUESTION 24 A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch. In which order are components reloaded during the process? A. one fabric module at the time B. all fabric modules followed by the entire switching platform C. all fabric modules in parallel D. one module and one supervisor at the time Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/release_notes/epld/epld_rn_7x.html www.VCEplus.io QUESTION 25 APIC EPG Resolution Immediacy is set to “Immediate” Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs? A. The “Immediate” and “On demand” options require a port group to be created on the VDS. B. If “On demand” is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG. C. If “On demand” is selected the policy is programmed in the hardware only when the first packet is received through the data path. D. If “immediate” is selected the policy is programmed in the hardware as soon as the leaf is booted. Correct Answer: C Section: Explanation: "Deployment Immediacy On demand — Specifies that the policy is programmed in the hardware policy CAM only when the first packet is received through the data path." https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/acifundamentals/b_ACI-Fundamentals/b_ACIFundamentals_chapter_01011.html#concept_7A9DDA71E41543258E5B49B58BC5AE4F QUESTION 26 Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect? IT Certification Exams - Questions & Answers | VCEplus.io A. Fibre Channel traffic is monitored only on one vHBA per server. B. The destination port for monitoring must be an unassigned Fibre Channel port. C. The monitoring of Fibre Channel traffic is limited to the default VSAN. D. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE. Correct Answer: D Section: QUESTION 27 Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments? A. Data center B. VMM domain C. VM name D. IP address Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_0_1/b_ACI_Virtualization_Guide_3_0_1_chapter_0100.html www.VCEplus.io QUESTION 28 A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning” and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements? A. Option A B. Option B IT Certification Exams - Questions & Answers | VCEplus.io C. Option C D. Option D Correct Answer: B Section: Explanation: www.VCEplus.io QUESTION 29 A network administrator must configure an extra keyring in Cisco UCS Manager. The key must provide a high level of encryption and secure authentication when users use the web interface. Which configuration command set must be applied to meet these requirements? A. Option A B. Option B C. Option C D. Option D IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1/ b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1_chapter_0110.html“cipher-suite-mode secure” is invalid command. “Cipher-suite-mode high” is valid command. “tls-protocol tls1-2” is invalid command. “Ssl-protocol tls1-2” is valid command. QUESTION 30 An engineer needs to make an XML backup of Cisco UCS Manager The backup should be transferred using an authenticated and encrypted tunnel and it should contain all system and service profiles configuration Which command must be implemented to meet these requirements? www.VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: C Section: Explanation: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_chapter40.html QUESTION 31 An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type? A. systems IT Certification Exams - Questions & Answers | VCEplus.io B. roles C. service profiles D. servers Correct Answer: C Section: Explanation: www.VCEplus.io https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter43.html QUESTION 32 Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.) A. image noted in the script file against switch bootflash B. DHCP server to bootstrap IP information C. script signed with security key D. TFTP server that contains the configuration script E. POAP feature license Correct Answer: B, D Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NXOS_Troubleshooting_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_Troubleshooting_Guide_7x_chapter_01100.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/fundamentals/configuration/guide/b_Cisco_Nexus_9000_Series_NX- OS_Fundamentals_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x_chapter_0100.html QUESTION 33 IT Certification Exams - Questions & Answers | VCEplus.io Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.) A. system B. third-party C. PSU D. CIMC E. BIOS Correct Answer: D, E Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4- 0_chapter_0100.html QUESTION 34 An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two) A. write B. C. verify commit www.VCEplus.io D. checkpoint E. apply Correct Answer: B, C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_System_Management_Configuration_Guide/sm_7sessionmgr.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/sm_rollback.html QUESTION 35 IT Certification Exams - Questions & Answers | VCEplus.io What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two) A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches. B. The hypervisors must be installed to Cisco FlexFlash SD cards. C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches. D. The cluster deployment type must support a mix of HDD and SSD. E. The servers must be discovered, unassociated, and connected to each fabric interconnect. Correct Answer: C, E Section: Explanation: https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/AdminGuide/3_5/b_HyperFlexSystems_AdministrationGuide_3_5/b_HyperFlexSystems_AdministrationGuide_3_5_ch apter_01111.html QUESTION 36 An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot? A. Create a SAN boot policy in which every initiator is mapped to the same target LUN. B. Define the vHBAs as bootable and leave the default values on the target definition. C. Define the vHBAs as bootable and leave the boot target definition empty. D. Create a SAN boot policy in which every initiator is mapped to a different target LUN. Correct Answer: A Section: Explanation: www.VCEplus.io While you have multiple zones consisting of FC vHBAs and storage target wwpns for SAN Fabrics A and B, you are ultimately booting off of the same boot LUN. Multiple paths to get to the same boot device which correspond with the same LUN ID. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_0110.html#r_sanarrayconfigurationchecklist QUESTION 37 An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.) A. Boot Policy B. Global Policy C. Power Control Policy D. Maintenance Policy E. Reboot Policy Correct Answer: D, E Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3- 1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_01011.html IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 38 A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? www.VCEplus.io (Choose two.) A. Option A B. Option B C. Option C D. Option D E. Option E IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: C, D Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_2cfs.html QUESTION 39 Refer to the exhibit. www.VCEplus.io An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails Which action accomplishes this objective? A. Set the pinning max-links value to 8 B. Statically assign each host interface to a fabric uplink C. Change the supported FEX type D. Configure the eight uplinks in a port channel Correct Answer: D Section: Explanation: Traffic disruption should be minimised when an uplink fails. If pinning was used and an uplink failed, then traffic associated with the failed link would be disrupted until it could be re-routed. Using a port-channel is much less disruptive. QUESTION 40 A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which opensource tool meets these requirements? IT Certification Exams - Questions & Answers | VCEplus.io A. SaltStack B. Terraform C. Puppet D. Kubemetes Correct Answer: C Section: Explanation: "Overview of Puppet architecture: [...] After it receives a catalog, the Puppet agent applies the catalog by checking each resource that the catalog describes. If it finds any resources that are not in their desired state, it makes any changes necessary to correct them." https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-seriesrackservers/whitepaper_c11-740103.pdf https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-devopsintegration-sol-brief.pdf from DCCOR book under Puppet section The operation of the Puppet agent involves periodically connecting to the Puppet master, which in turn compiles and sends a configuration manifest to the agent. The agent reconciles this manifest with the current state of the node and updates state that is based on differences. QUESTION 41 An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.) A. Enable Encryption for LDAP B. Add a self-signed LDAP certificate to Cisco Intersight. C. Enable Certificate Signing Request in Cisco Intersight. D. E. Add a trusted root LDAP certificate to Cisco Intersight Add a trusted OAuth token to Cisco Intersight www.VCEplus.io Correct Answer: A, D Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/unified_computing/Intersight/b_Cisco_Intersight_Appliance_Getting_Started_Guide/b_Cisco_Intersight_Appliance_Install_and_Upgrade_Guide_chapter_0110.h tml QUESTION 42 Refer to the exhibit. Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements? IT Certification Exams - Questions & Answers | VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: B www.VCEplus.io Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_System_Management_Configuration_Guide_7x_chapte r_011100.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nxos/system_management/configuration/guide/sm_nx_os_cli/sm_15netflow.html QUESTION 43 Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose Two) A. The address must be removed from the configuration. B. The address must reach the age limit that is configured for the interface. C. The interface must be converted to a routed port. D. The device must be restarted manually. E. Shutdown and then no shutdown must be run on the interface. Correct Answer: A, C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nxos/security/configuration/guide/b_Cisco_Nexus_7000_NXOS_Security_Configuration_Guide__Release_6- x/b_Cisco_Nexus_7000_NXOS_Security_Configuration_Guide__Release_6-x_chapter_010001.html IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 44 A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. What action should be taken to implement the same action on Nexus switches? A. Use the write memory command to save the configuration. B. Use the alias command to use the write memory command. C. Use the exit command to leave the configuration mode and save the configuration automatically. D. Use the wri command to use the copy running-config startup-config command. Correct Answer: B Section: Explanation: Reference: https://community.cisco.com/t5/switching/write-command-on-nexus-switchs/td-p/1958386 QUESTION 45 Which data interchange format is presented in this output? www.VCEplus.io A. XML B. YAML C. JSON D. CSS Correct Answer: C Section: QUESTION 46 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements? A. aaa authentication none B. aaa authentication login default group radius C. aaa authentication login default group local D. aaa authentication login default fallback error local Correct Answer: D Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/cradtac1.html QUESTION 47 The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only? IT Certification Exams - Questions & Answers | VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: D Section: Explanation: “mod all” is incorrect. “mod 1test” is incorrect. “publish event” is incorrect. “mod 1 test” is correct. It is with “policy-default”. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/systemmanagement/guide/b_Cisco_Nexus_7000_Series_NX-OS_System_Management_Configuration_Guide-RI/configuring_online_diagnostics.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/systemmanagement/bcisconexus-9000-series-nx-os-system-management-configuration-guide-93x/b-cisco-nexus-9000- www.VCEplus.io seriesnxos-system-management- configuration-guide-93x_chapter_011010.html https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-3234.pdf QUESTION 48 An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action? A. The zone merge stops. B. The zone merge pauses until the upgrade completes C. The upgrade stops D. The zone merge executes and then the upgrade completes. Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html QUESTION 49 An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario? IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: A Section: Explanation: Reference: https://www.google.com/search?q=hsrp+priority&oq=hsrp+priority&aqs=chrome..69i57j0l2j0i20i263i395j0i395l6.5307j1j4&sourceid=chrome&ie=UTF-8 QUESTION 50 An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.) A. MAC addresses B. WWPNPool C. WWNN D. VLAN ID E. Fabric ID IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: B, E Section: Explanation: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucsmanager/whitepaper_c11-697337.html QUESTION 51 Which data structure results from running this Python code? A. Set B. Tuple C. Dictionary D. List Correct Answer: A Section: QUESTION 52 www.VCEplus.io An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement Which set of commands configures the SPAN session? IT Certification Exams - Questions & Answers | VCEplus.io A. Option A B. C. D. Option B Option C Option D www.VCEplus.io Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/b_5600_System_Mgmt_Config_7x/configuring_span.html QUESTION 53 What are two types of FC/FCoE oversubscription ratios? (Choose two.) A. server storage to end-node count B. port bandwidth to uplink bandwidth C. edge ISL bandwidth to core ISL bandwidth D. host bandwidth to storage bandwidth E. switch processing power to end-node processing power Correct Answer: C, D Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-1121.pdf https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_fcoe_ops.html QUESTION 54 Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal? A. Reinstall the cluster to generate the default key ring certificate B. Generate a new default key ring certificate from the Cisco UCS Manager C. Reboot the SSO component of the Cisco UCS Manager D. Regenerate the default key ring certificate manually Correct Answer: D Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_0110.html QUESTION 55 An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link Which load balancing method should be used to accomplish this goal? A. src-id/dst-id IT Certification Exams - Questions & Answers | VCEplus.io B. src-dst-oui C. src-dst-port D. src-id/dst-id/oxid Correct Answer: D Section: Explanation: Exchange based—The first frame in an exchange picks a link and subsequent frames in the exchange follow the same link. However, subsequent exchanges can use a different link. This provides more granular load balancing while preserving the order of frames for each exchange. Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_interfaces/pc.html Load balancing attributes indicate the use of the source-destinationID (src-dst-id) or the originator exchange OX ID (src-dst-ox-id, the default) for load balancing pathselection. Source: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nx-os/nx_os_fabric/vsan.html?bookSearch=true https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_3/sanos/configuration/guide/PortChnl.pdf QUESTION 56 A customer needs a tool to take advantage of the CI/CD model to streamline its operation and optimize cost. The customer wants to integrate the solution with the cisco products it currently it currently uses, Including Cisco ACI networking and Cisco UCS servers. The solution should also provide on-premises Kubernetes and AppDynamics performance monitoring. Because of the security requirements, the solution not install a local client on products under management. which orchestration solution meets these requirements? A. Cisco APIC B. CISCO UCS director C. Cisco DCNM D. Cisco CloudCenter Correct Answer: D Section: www.VCEplus.io QUESTION 57 Which configuration generates a syslog message when CPU utilization is higher than 60%? A. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" B. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" C. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" D. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high" Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/support/docs/ip/internet-protocol-ip/200931-EEM-Subsystem-in-Order-to-Monitor-CPU-Tr.pdf https://blog.ipspace.net/2008/06/generate-snmp-trap-on-high-cpu-load.html QUESTION 58 Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts? IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io A. Option A B. Option B C. Option C D. Option D Correct Answer: B Section: Explanation: https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/200998-Nexus-7000-OTV-VLAN-Mapping-on-Overlay.html?dtid=osscdc000283 https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/200998-Nexus-7000-OTV-VLAN-Mapping-on-Overlay.html IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 59 A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true? A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web. B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed. C. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80. D. The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web. The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80. Correct Answer: D Section: Explanation: Apply Both Direction and Reverse Filter Port in the subject for the filter. These two options are by default enabled...This means that if the provider EPG initiates traffic toward the consumer EPG, the Cisco ACI fabric allows it for any destination ports if the source port is 80. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.htmlReverse filter and apply in both directions is default. If a filter allows traffic from any consumer port to a provider port (e.g. 8888), if reverse port filtering is enabled and the contract is applied both directions (say for TCP traffic), either the consumer or the provider can initiate communication. The provider could open up a TCP socket to the consumer using port 8888, whether the provider or consumer sent traffic first. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01000.html QUESTION 60 A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage? A. B. Cisco IMC Adapter www.VCEplus.io C. I/O module D. BIOS Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4- 0_chapter_0100.html https://www.youtube.com/watch?v=g-4OgYigvRI IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 61 What is required for using puppet in a Cisco NX-OS environment? A. Open Agent Container B. XML management interface C. NX-API D. OpenNP Correct Answer: A www.VCEplus.io Section: QUESTION 62 An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered? A. It always learns about switches that are logging in. B. It can be distributed by using Cisco Fabric services. C. It authorizes only the configured sWWN to participate in the fabric. D. It binds the fabric at the switch level. Correct Answer: B Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/psec.html#92130 QUESTION 63 IT Certification Exams - Questions & Answers | VCEplus.io Which behavior defines streaming telemetry as a push model in Cisco devices? A. Monitoring clients are pulling data from the network to see real-time statistics B. JSON encoded telemetry data is transported using the gRPC protocol C. The network devices send data in JSON or GPB format to configured endpoints D. Events and network changes generate telemetry data Correct Answer: D Section: Explanation: https://developer.cisco.com/docs/ios-xe/#!streaming-telemetry-quick-start-guide/streamingtelemetry QUESTION 64 What is a characteristic of the install all command on the cisco Nexus series switch? A. Upgrades only certain modules B. Automatically checks the image integrity C. Impact data plan traffic D. Continues the upgrade process if any step in the sequence fails Correct Answer: B Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NX- OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.htmlinstall all command automatically checks the image integrity, which includes the NXOS softwareimage. The command performs a platform validity check to verify that a wrong image is not used. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/b_Cisco_Nexus_3000 _Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.html QUESTION 65 An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token? A. B. C. D. IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: C Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2- x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html QUESTION 66 The EPLD update of the supervisor module has been scheduled for several cisco MDS 9000 switches. What will be the impact of the update? A. All control plane traffic is stopped for the duration of the EPLD update and the switch remain operational for the duration of the upgrade. B. The redundant supervisor lakes over while the EPLD update is in progress and there is no service disruption. C. All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed. D. The redundant supervisor lakes while the EPLD update is in progress and the switch is rebooted after the upgrade is completed. Correct Answer: C Section: Explanation: An EPLD update of the supervisor module of fabric switches (Cisco MDS 9100, Cisco MDS 9200, and Cisco MDS 9300 Series switches) is disruptive since there is no redundant supervisor to take over while the update is in progress. All traffic through the system is stopped for the duration of the update and the switch is rebooted after the upgrade has completed. The update may take up to 30 minutes to complete. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld /epld_rn.html#pgfId-241683 QUESTION 67 An engineer configures an intersignt virtual application and must claim over 200 targets. The engineer starts the Claim target procedure. The engineer has prepared this initial comma- separated value file to provision the IT Certification Exams - Questions & Answers | VCEplus.io targets: Which Information must be included In the comma-separated value flit to provision the targets? A. FQON, AD name, IP address, email B. location, address, name. password C. certificate, user name, password. email D. target type, hostname or P address, user name, password Correct Answer: A Section: QUESTION 68 What is an advantage of NFSv4 over Fibre Channel protocol? A. Improved security B. Lossless throughout C. Congestion management D. Uses IP transport Correct Answer: A www.VCEplus.io Section: Explanation: https://www.rcannings.com/san-storage-fc-vs-fcoe-vs-iscsi/ QUESTION 69 Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy? A. User Notification B. User Acknowledge C. No Action D. Delayed Action E. Immediate Action Correct Answer: B, C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_01111.pdfFollowing are the values for the Firmware Auto Sync Server policy: User Acknowledge—Firmwareon the server is not synchronized until the administrator acknowledges the upgrade in the PendingActivities dialog box. No Action—No firmware upgrade is initiated on the server. IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 70 An administrator is implementing DCNM so that events are triggered when monitored traffic exceeds the configured present utili zation threshold. The requirement is to configuration a maximum limit of 39860437 bytes that applies directly to the statistics collected as a ratio of the total link capacity. Which DCNM performance monitoring configuration parameter must be implemented to achieve this result? A. Absolution Values B. Baseline C. Utill% D. Per port Monitoring Correct Answer: A Section: QUESTION 71 A network architect must redesign a data center on OSPFv2. The network must perform fast reconvergence between directly connected switches. Which two actions must be taken to meet the requirement? (Choose two) A. Configure all links on AREA 0. B. Implement a virtual link between the switches. C. Use OSPF point-to-point links only. D. Set low OSPF hello and DEAD timers. E. Enable BFD for failure detection. Correct Answer: C, D Section: QUESTION 72 www.VCEplus.io Refer to the exhibit. Refer to the exhibit. A host with source address 10.10.10.10. sends traffic to multicast group 239.1.1.1. how do the vPC switches forward the multicast traffic? A. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only one Po20. B. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20. C. If multicast traffic is received on Po11 and Switch2, the traffic is dropped. IT Certification Exams - Questions & Answers | VCEplus.io D. If multicast traffic is received on Switch over the vPC peer-link, the traffic is dropped. Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/support/docs/ip/multicast/214140-multicast-forwarding-in-vpcbased-on-loc.html#anc8 QUESTION 73 An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers. Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers? A. System-mac 0123.4567.89ab B. Peer-switch C. VPC local role-priority 4000 D. Peer-gateway Correct Answer: B Section: Explanation: Peer-Switch feature allows the vPC peers use the same STP root ID as well as the same bridge ID. Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6- x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NXOS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NXOS_Interfaces_Configuration_Guide_chapter_0111.html QUESTION 74 www.VCEplus.io A company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches. A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage. Which set of actions must be taken to meet these requirements? A. 1. Create a user defined role and add the required privileges. B. Assign a role to a user. C. 1. Add the required privilege to the VDC-admin role. D. Commit the changes to the active user database. E. 1. Modify a network-operator role and add the required privileges. F. Assign a VDC-operator role to a user. G. 1. Assign the network-admin role to a user. H. Commit the role to the switch to the active user database Correct Answer: B Section: QUESTION 75 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io Refer to the exhibit. Esxi-server is associated to the blade server. A VLAN added to trunka. the VLAN is missing on the vNIC of ESXI-server. Which action should be taken to add the VLAN to the cNIC? A. Change the template type of ESXI-Server to an updating template. B. Change the template type of Trunk-A to an updating template. C. Remove both template and recreate them as updating templates. D. Remove the VLAN from the Trunk-A template and add the VLAN again. Correct Answer: D Section: www.VCEplus.io QUESTION 76 An engineer must implement an automation solution to allow the backup of the configuration of cisco Nexus series switches to a centralized location. The solution must: * Support the team-developed custom monitoring scripts that are packaged using RPM packaging that the framework must support. * Be developed from the underlying cisco Nexus operating system. * Have no impact on the operating system of the underlying switch if the resource contention occurs. * Use Python to expand the existing automation framework. Which solution meets these requirements? A. Guest Shell B. Bash Shell C. TCL Shell D. Vegas Shell Correct Answer: A Section: QUESTION 77 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io Refer to the exhibit. What is the result of executing this python code? A. It backs up Cisco switches to Cisco Prime infrastructure. B. It sends the switch configuration to Cisco TAC. C. It sends a Cisco device backup to a remote destination. D. It schedules a backup on a Cisco switch using EEM. Correct Answer: C Section: QUESTION 78 Refer to the exhibit. www.VCEplus.io Refer to the exhibit. An engineer must monitor ingress traffic from SW1 and SW2 port-channel interfaces from SW3. Which configuration must be implemented to accomplish this goal? A. IT Certification Exams - Questions & Answers | VCEplus.io B. C. D. www.VCEplus.io Correct Answer: D Section: QUESTION 79 An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence. Which attribute must be selected? A. MAC address B. Custom C. Tag D. IP IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: D Section: Explanation: If you want to use a network-based attribute and classify IP addresses in the same subnet, you must use the MAC-based network attribute. IP-based microsegmented EPGs do not support classification for IP addresses in the same subnet. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_Guide_3_1_1/b_ACI_Virtualization_Guide_3_1_1_chapter_0100.html QUESTION 80 An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must be specified in the vHBA template? (Choose two) A. WWIN B. VLAN ID C. Fabric ID D. MAC addresses E. WWVPN Pool Correct Answer: A, E Section: QUESTION 81 An engineer must configure a VXLAN routing on a cisco Nexus 9000 series Switch. The engineer requires a solution where all the leaf switches have the same gateway MAC and IP address. Which configuration set accomplishes this task? A. www.VCEplus.io B. C. D. IT Certification Exams - Questions & Answers | VCEplus.io Correct Answer: C Section: QUESTION 82 Which virtual MAC address is the default for HSRP version 2 group 10? A. 0000.5E00.0110 B. 0000.0C9F.F00A C. 3716.1350.1C0A D. 0000.0C9F.F010 Correct Answer: B Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3sbook/fhp-hsrp-v2.html QUESTION 83 Refer to the exhibit. Which statement about the ERSPAN configuration in this environment is true. A. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer. IT Certification Exams - Questions & Answers | VCEplus.io B. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer. C. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic. D. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic. Correct Answer: A Section: QUESTION 84 Refer to the exhibit. Which two statements about the routing table of the leaf switch are true? (Choose two.) A. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI. B. 172.16.100.0/24 is a BD subnet in ACI. C. The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in ACI. D. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI. E. 10.20.1.0./24 is a BD subnet in ACI. Correct Answer: D, E Section: www.VCEplus.io QUESTION 85 Which mroute state is created when Bidirectional PIM is deployed at a site? A. MVPN Type-6 B. *,G C. MVPN Type-7 D. S,G Correct Answer: B Section: Explanation: Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. PIM Sparse mode RP builds 2 entries *, G and S, G but when we use PIM bidirectional mode, the RP will never build a S,G entry and, it only allow the *,G entry. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16-5/imc-pimxe-16-5-book/imc-tech-oview.html and https://networklessons.com/multicast/multicastbidirectional-pim QUESTION 86 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io Which statement describes the default gateway configuration of the vPC? A. N7K-1 acts as the default gateway for all traffic. B. N7K-2 forwards traffic that is destined for the default gateway by using the peer link. C. N7K-2 acts as the default gateway for all traffic. D. Either switch can act as the active default gateway. Correct Answer: D Section: Explanation: https://community.cisco.com/t5/networking-documents/peer-gateway-feature-on-the-nexus-7000/ta-p/3113290 QUESTION 87 Refer to the exhibit. IT Certification Exams - Questions & Answers | VCEplus.io What is the reason the system-fm-vrrp checkpoint was created? A. The VRRP service restarted and the checkpoint was automatically created. B. The network administrator manually created it. C. The VRRP process crashed and the checkpoint was automatically created. D. The VRRP-enable feature has been disabled. Correct Answer: D Section: www.VCEplus.io Explanation: automatically created by the Nexus when the vrrp feature is disabled QUESTION 88 What are two capabilities of the Cisco Network Assurance Engine? (Choose two.) A. It verifies the speed of network packet flows by using telemetry. B. It predicts the network load on a data center. C. It validates that devices comply with network security policies. D. It ensures that network performance meets an SLA. E. It predicts the impact of changes to the network. Correct Answer: C, E Section: Explanation: - Predict the impact of network changes - Verify network-wide behavior - Ensure network security policy and compliance https://www.cisco.com/c/en/us/products/collateral/data-center-analytics/network-assuranceengine/at-a-glance-c45-740230.html QUESTION 89 What is an advantage of streaming telemetry over SNMP? IT Certification Exams - Questions & Answers | VCEplus.io A. on-change traps sent to a receiver B. periodic push-based subscription messages C. periodic polling of the device status D. MD5-based authentication on polling Correct Answer: B Section: QUESTION 90 Refer to the exhibit. www.VCEplus.io All switches are configured with the default OSPF priority. Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area? A. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 255 B. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 1 C. SW2# configure terminal SW2 (config)# router ospf 1 SW2 (config-router)# router-id 10.10.10.22 D. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 0 Correct Answer: A Section: Explanation: Priority in OSPF is mainly used to influence/determine a designated router/backup designated router for a network. By default, the priority is 1 on all routers. A router with a high priority will always win the DR/BDR election process. QUESTION 91 IT Certification Exams - Questions & Answers | VCEplus.io An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of a UCS C-series rack mount server. What setting will accomplish this goal? A. C0/C1 state B. C6 Retention C. C2 state D. C6 non-Retention Correct Answer: B Section: Explanation: Reference: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-bseries-blade-servers/white-paper-c11-744678.html. For Package C State limit default: C0/C1 State;Max Per: Platform Default; Low-latenc: Platform Default; Energy Effi: C6 Retention https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-seriesblade-servers/whitepaper_c11-740098.pdf he higher the package C-state, the lower the power useof that idle package state. The default setting, Package C6 (nonretention), is the lowest power idlepackage state supported by the processor. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/4_0/b_Cisco_UCS_C- Series_GUI_Configuration_Guide_for_S3260_Servers_40/b_Cisco_UCS_CSeries_GUI_Configuration_Guide_for_S3260_Servers_40_appendix_010011.html"Whether the BIOS sends the C6 report to the operating system. When the OS receives the report, itcan transition the processor into the lower C6 power state to decrease energy usage whilemaintaining optimal processor performance" QUESTION 92 An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.) A. B. C. contains the AAA and RBAC configurations www.VCEplus.io contains a file with an extension.tgz that stores all of the configurations contains the configuration organizations and locales D. contains all of the configurations E. contains the VLAN and VSAN configurations Correct Answer: C, E Section: Explanation: Logical configuration—An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect. You cannot use this file for a system restore. QUESTION 93 Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.) A. syslog redirection B. DNS servers C. SMTP servers D. NTP servers E. SMTP reply-to-address Correct Answer: B, D Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_gui_cisco_intergight_management.html QUESTION 94 An engineer must configure Cisco IMC server management NIC for autonegotiation. Which setting should be selected? A. Cisco card B. shared LOM C. dedicated D. shared LOM EXT Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/cli/config/guide/4_0/b_Cisco_UCS_CSeries_CLI_Configuration_Guide_40/b_Cisco_UCS_CSeries_CLI_Configuration_Guide_40_chapter_01000.html https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/unified-computingsystem/200221-Auto-negotiation-not-enabling-by-default.html QUESTION 95 Refer to the exhibit. What is the result of this series of commands? www.VCEplus.io A. It reboots the server immediately. B. It verifies the firmware update on the server. C. It activates the firmware on the next adapter boot. D. It updates the firmware on adapter 1/1/1 immediately. Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/b_UCSM_CLI_Firmware_Management_Guide_4- 0_chapter_011.html QUESTION 96 What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment? A. offline encryption acceleration B. increased network throughput IT Certification Exams - Questions & Answers | VCEplus.io C. GPU acceleration D. Increased compression efficiency Correct Answer: D Section: Explanation: https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi _3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%20of%20HyperFlex%20Hardware%20Acceleration%20Cards,- This%20chapter%20provides&text=These%20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most%20storage%20workloads. QUESTION 97 Which two hypervisors does Cisco HyperFlex support? (Choose two.) A. B. C. VMware vSphere Microsoft Hyper-V OpenStack www.VCEplus.io D. Citrix XenServer E. RedHat KVM Correct Answer: A, B Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflexhx-series/solution-overview-c22-736815.pdf QUESTION 98 An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus 5600 Series switch? A. B. Errors are skipped when an atomic rollback type is triggered. www.VCEplus.io A user who is assigned to the network-operator user role can perform a rollback. C. The configuration rollback functionality is disabled when FCoE is enabled. D. A system checkpoint is generated automatically when the running configuration is saved to NVRAM. Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/503_n1_1/cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.cisco.com/c/en/us/td/docs/switches/ datacenter/nexus5000/sw/system_management/503_n1_1/ cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf&ved=2ahUKEwjQ8ubTuK3xAhWm3jgGH Z9gB0oQFjAAegQIBRAC&usg=AOvVaw2j0nnvXiChAoVooxX2Qx0g QUESTION 99 Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true? A. All modules on the switch are disrupted. B. An EPLD upgrade is nondisruptive. C. Only the modules that are being upgraded are disrupted. D. The upgrade can be performed from the standby supervisor module. Correct Answer: C Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/ epld_rn.html#pgfId-241919 QUESTION 100 Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules? A. install all kickstart systemparallel B. install all epld bootflash: C. install all epld bootflash: D. install all kickstartsystem Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/upgrade/guide/cisco_nexus7000_software_upgrade_and_downgrade_guide_8x.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/7_x/nx-os/upgrade/guide/b_Cisco_Nexus_7000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7- x.html#d54e307a1635 QUESTION 101 www.VCEplus.io Which two statements about the process of performing an EPLD upgrade on a Cisco MDS 9000 series Switch are true? (Choose two.) A. If an upgrade is interrupted, the upgrade continues after a connection is restored. B. The upgrade can be performed from the standby supervisor module. C. The active supervisor can be upgraded. D. Modules must be online to be upgraded. E. The Upgrade process disrupts only the module that is being upgraded. Correct Answer: D, E Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/release_notes/epld/epld_rn_8x.html "On a Cisco Nexus 9500 platform switch that has two supervisor modules, upgrade the EPLDs for the standby supervisor and then switch the active supervisor to the standby mode to upgrade its EPLDs. The supervisor switchover is not disruptive to traffic on Cisco Nexus 9500 platform switches. On a switch that has only one supervisor module, you can upgrade the active supervisor, but this will IT Certification Exams - Questions & Answers | VCEplus.io disrupt its operations during the upgrade." Under Installation guidelines. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/epld-rn/nxos_n9K_epldRN_924.html QUESTION 102 Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true? A. Any commands that have conflicting settings between roles are denied. B. Access to a command takes priority over being denied access to a command. C. The first role assigned takes precedence over subsequent roles. D. The last role assigned takes precedence over previous roles. Correct Answer: B Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sec/nxos/sec/clicfgur.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/cisco_mds9000_security_config_guide_8x/configuring_users_and_common_roles.html QUESTION 103 Refer to the exhibit. www.VCEplus.io Which backup operation type does not include the Preserve Identities feature? A. logical configuration B. system configuration C. full state D. all configuration Correct Answer: C Section: Explanation: This checkbox remains selected for All Configuration and System Configuration. Full State backup does not have Preserver Identity feature. All configs, logical and system backups seem to allow “preserve identities”: https://books.google.pt/books?id=5VXUDwAAQBAJ&pg=PT699&lpg=PT699&dq=Preserve+Identities+feature+backup +ucs&source=bl&ots=daWxti4DV&sig=ACfU3U3X8UlPtS8EewzRIqTxqpyNVqOaNQ&hl=es419&sa=X&ved=2ahUKEwiYhtaxyMDqAhXFzIUKHXl8CzoQ6AEwC3oECAoQAQ#v=onepage&q= IT Certification Exams - Questions & Answers | VCEplus.io Preserve%20Identities%20feature%20backup% 20ucs&f=false QUESTION 104 Refer to the exhibit. What is a characteristic presented in the service profile of the UUID? A. based on the hardware B. vendor assigned C. unique system generated D. allocated from a UUID pool Correct Answer: A Section: Explanation: www.VCEplus.io there is no parameter for 'set identity dynamic-uuid' to specify a pool name - you can only state "derived" or a 32 hex character string (128-bits, therefore full UUID). ucspe /org/service-profile # set identity dynamic-uuid derived Derived FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF Dynamic UUID The documentation, as usual for Cisco, is poor. Shagua references old v1.4.1 documentation but it's the same in 4.1. It's inaccurate as uuid-pool should now read uuid-suffix-pool. You can use UCSPE to check the CLI with contextual help. ucspe /org/service-profile # set identity dynamic-uuid Dynamic UUID dynamic-wwnn Dynamic WWNN uuid-suffix-pool UUID Suffix Pool wwnn-pool WWNN Pool If set identity dynamic-uuid only gives us the option of a static UUID or the parameter "derived", and set identity uuid-suffix-pool is the option to assign a pool... I would suggest that the most logical answer here is - derived from the hardware. https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_chapter27.html QUESTION 105 A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal? A. server pool B. server C. custom server D. restrict migration Correct Answer: C Section: Explanation: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter28.html IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 106 Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed? A. any service profile that has no host firmware policy defined B. any service profile that uses a user-created host firmware policy C. any service profile that is not in the root sub-org D. any service profile that uses the global-default host firmware policy Correct Answer: A Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/3- 1/b_UCSM_GUI_Firmware_Management_Guide_3_1/b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_011.html QUESTION 107 A Cisco UCS user called “Employee1” accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements? A. Modify the privilege level assigned to the user B. Assign users to a specific Cisco UCS locale C. Assign the user "Employee1" the network-operator role D. Define a custom user role and assign it to users Correct Answer: B Section: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4- 1/m_rolebased_access_control_conflguration.html#d18994e1993a1635 User Locales You can assign a user to one or more locales. Each locale defines one or more organizations (domains) to which a user can access. Access is usually limited to the organizations specified in the locale. https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4- 1/m_rolebased_access_control_conflguration.html#d18994e1993a1635 IT Certification Exams - Questions & Answers | VCEplus.io QUESTION 108 What is an advantage of NFS as compared to Fibre Channel? A. NFS enable thin provisioning for LUNs. B. NFS provides the dynamic allocation of storage capacity. C. NFS removes the impact of IP overhead. D. NFS provides direct access to the underlying storage hardware. Correct Answer: B Section: Explanation: https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKINI-1011.pdf QUESTION 109 Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors? A. The standby supervisor must be offline before the firmware upgrade begins. B. Both supervisors load the new firmware and then the active supervisor reboots. C. Supervisors can be upgraded independently to test the new firmware. D. The new firmware is load on the standby supervisor first. Correct Answer: D Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/support/docs/storage-networking/mds-9000-nx-os-san-ossoftware/118952-technote-mds9k- 00.html#:~:text=On%20a%2095xx%20or%2097xx,becomes%20the%20new%20standby%20supervisor. QUESTION 110 A Cisco MDS 9000 series storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file? A. /mnt/core B. /mnt/pss C. /mnt/logs D. /mnt/recovery Correct Answer: B Section: Explanation: IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/system_management/nx-os/sysmgmt_cli_6-x/sys.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/system_management/nx-os/sysmgmt_cli_6-x/sys.html#37039 QUESTION 111 In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two) A. frames that were sent with high credit B. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender C. frames that were sent on the link but not yet received. D. frames that were sent on the link and received. E. www.VCEplus.io frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender. Correct Answer: B, C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fcoe/config/cisco_nexus7000_fcoe_config_guide_8x/configuring_fcoe.html QUESTION 112 Refer to the exhibit. An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated. What is wrong with the implementation? IT Certification Exams - Questions & Answers | VCEplus.io A. E Ports on both MDS switches must be configured as F ports for the zoning to function. B. Zones are local to the MDS switch and name service must be used to activate the connection between E ports. C. Different zone set names must be configured on both MDS switches. D. Zones must have the same name on both MDS switches for the E ports to function. Correct Answer: D Section: Explanation: When two switches in a fabric are merged using a TE or E port, these TE and E ports may become isolated when the active zone set databases are different between the two switches or fabrics." https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nxos/nx_os_fabric/zone.html QUESTION 113 Refer to the exhibit. What is the result of implementing this configuration? A. The Fibre Channel interface is configured for synchronization distribution. B. The Fibre Channel interface is configured for SPAN. C. The Fibre Channel interface is configuration for source distribution. D. The Fibre Channel interface is configured for FSPF. Correct Answer: B Section: Explanation: www.VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/421_n1_1/b_Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1/Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1_cha pter3.html https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/Cisco_Nexus_5000_Series_Switch_CLI_Software_Configuration_Guide_chapter50.html QUESTION 114 An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two) A. Configure the switchport monitor under interface fc2/2 B. Configure the switchport mode SD under interface tc2/1. C. Configure switchport speed 4000 under interface fc2/2. D. Configure session type fc under monitor session 1. E. Configure the switchport mode SD under interface fc2/2. Correct Answer: C, E Section: IT Certification Exams - Questions & Answers | VCEplus.io Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/Span.html QUESTION 115 What is a recommended design choice in a topology for multipathing iSCSI traffic? A. single initiator to dual targets B. initiators and targets in separate subnets C. dual initiators to a single target with bonded interfaces D. two NICs bended together on the initiator Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5_1/system_management/configuration/guide/n1000v_system/n1000v_system_13iscsi.html#wp1052813 QUESTION 116 Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.) A. check the impact of the upgrade using the show install all impact command B. disable Cisco Fabric Services C. back up the configuration D. free up space on the USB3 device by deleting old Cisco NX-OS image files E. make the primary supervisor the active supervisor Correct Answer: A, C www.VCEplus.io Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_2/upgrade/guides/nx-os/upgrade.html QUESTION 117 Which two methods are available to Manage an ACI REST API session authentication when a user is unauthenticated? A. POST to aaaLogin B. POST to aaaUserLogin C. GET aaaRefresh D. GET to aaaListDomains E. DELETE to aaaLogout Correct Answer: A, C Section: Explanation: These API methods enable you to manage session authentication: aaaLogin —Sent as a POST message, this method logs in a user and opens a session. The message body contains an aaa:User object with the name and password attributes, and the response contains a session token and cookie. If multiple AAA login domains are configured, you must prepend the user's name with apic: domain\\. aaaRefresh —Sent as a GET message with no message body or as a POST message with the aaaLogin message body, this method resets the session timer. The response contains a new session token and cookie. aaaLogout —Sent as a POST message, this method logs out the user and closes the session. The message body contains an aaa:User object with the name attribute. The response contains an empty data structure. aaaListDomains —Sent as a GET message, this method returns a list of valid AAA login domains. You can send this message without logging in. IT Certification Exams - Questions & Answers | VCEplus.io https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html QUESTION 118 An administrator needs to configure an automated policy to shut down a link when a given threshold is exceeded on MDS switch. Which feature needs to be used? A. Scheduler B. RMON C. EEM D. Call Home Correct Answer: C Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/interfaces/nx-os/cli_interfaces/intf.html QUESTION 119 What is an advantage of using Ansible for automation as compared to puppet and chef? A. Ansible automates the enforcement of configuration settings. B. Ansible perform automation without installing a software agent on the target node. C. Ansible configures a set of CLI commands on a device by using NETCONF. D. Ansible abstracts a scenario so that set of configuration setting can be used across multiple operating systems. Correct Answer: B Section: QUESTION 120 www.VCEplus.io What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment? A. SSH B. Open Agent Container C. XML management interface D. NX-API Correct Answer: D Section: Explanation: https://docs.ansible.com/ansible/2.5/modules/nxos_nxapi_module.html https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html QUESTION 121 A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.) A. Bootflash must contain a special directory named POAP with poap.py file. B. The switch is in bootup process. C. No startup configuration is available. D. The license file is missing on the switch. IT Certification Exams - Questions & Answers | VCEplus.io E. No Cisco NX-OS image is present on the bootflash. Correct Answer: B, C Section: Explanation: POAP is an automatic provisioning and zero-touch deployment feature that assists device owners in the initial deployment and configuration of Nexus switches. The feature works by checking for a local configuration script. If the script has been deleted, the switch has been reset to factory settings, or this is the first boot-up, the POAP daemon will connect to a preset list of servers to download an initial configuration file. To perform this operation, the switch must first obtain an IP address from a local DHCP server. POAP configuration settings can also be passed through the DHCP response. Which conditions should be verified, so they need to be TRUE. Like no startup (A) and bootup (B). C means that it needs to miss a license file and E means it needs to miss an NX-OS image. QUESTION 122 AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch. event manager applet Backup-config event timer watchdog time 1800 name timer event cli match “copy running-config startup-config” what is the result of applying this configuration? A. It saves the running configuration every 1800 seconds. B. It generates an error because no action is mentioned. C. It executes the copy running-config startup-config command. D. It blocks the copy running-config startup-config command. Correct Answer: B Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/systemmanagement/b-cisco-nexus-9000-series-nx-os-system-management-configuration-guide-93x/bcisco-nexus-9000-series-nx-os-system- management- configuration-guide-93x_chapter_0100010.html www.VCEplus.io QUESTION 123 AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to 1500 and then generable a massage. What configuration will accomplish this task? A. Option A IT Certification Exams - Questions & Answers | VCEplus.io B. Option B C. Option C D. Option D Correct Answer: C Section: Explanation: The following example modifies an overridden policy by changing the number of FCNS database entries to 1500. It also generates both the configured and the default syslog messages of the default system policy event manager applet fcns_policy override __fcns_entries_max_per_switch event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit. Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/systemmanagement/cisco_mds9000_system_management_config_guide_8x/configuring_the_embedded_event_manager.html QUESTION 124 www.VCEplus.io IT Certification Exams - Questions & Answers | VCEplus.io Refer to the exhibit. www.VCEplus.io IT Certification Exams - Questions & Answers | VCEplus.io www.VCEplus.io IT Certification Exams - Questions & Answers | VCEplus.io An engineer configures a new application profile using REST API and receives this error massage. www.VCEplus.io IT Certification Exams - Questions & Answers | VCEplus.io Which method can be used before application profile can be configured? A. POST to aaaLogin B. POST to aaaRefresh C. POST to aaaLogout D. GET to aaaListDomains Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html QUESTION 125 www.VCEplus.io An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model. Which technology should be used to accomplish this goal? A. NX-API REST B. NETCONF C. JSON-RPC D. NX Yang Correct Answer: A Section: Explanation: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/programmability/guide/b_Cisco_Nexus_9000_Series_NXOS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_Programmability_Guide_7x_chapter_010001.pdf QUESTION 126 An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used? A. NX-OS JSON-RPC B. NX-API Sandbox C. Guest She

Cisco.350-601.vMar-2024.by_.Isin_.200q.pdf

Document Details

Tags

Related

Full Transcript

Upgrade to continue