CAE ATPL 13. Principles of Flight-2 PDF

PRINCIPLES OF FLIGHT ATPL GROUND TRAINING SERIES  I Introduction © CAE Oxford Aviation Academy (UK) Limited 2014 I All Rights Reserved Introduction This text book is to be used only for the purpose of...

PRINCIPLES OF FLIGHT ATPL GROUND TRAINING SERIES  I Introduction © CAE Oxford Aviation Academy (UK) Limited 2014 I All Rights Reserved Introduction This text book is to be used only for the purpose of private study by individuals and may not be reproduced in any form or medium, copied, stored in a retrieval system, lent, hired, rented, transmitted or adapted in whole or in part without the prior written consent of CAE Oxford Aviation Academy. Copyright in all documents and materials bound within these covers or attached hereto, excluding that material which is reproduced by the kind permission of third parties and acknowledged as such, belongs exclusively to CAE Oxford Aviation Academy. Certain copyright material is reproduced with the permission of the International Civil Aviation Organisation, the United Kingdom Civil Aviation Authority and the European Aviation Safety Agency (EASA). This text book has been written and published as a reference work to assist students enrolled on an approved EASA Air Transport Pilot Licence (ATPL) course to prepare themselves for the EASA ATPL theoretical knowledge examinations. Nothing in the content of this book is to be interpreted as constituting instruction or advice relating to practical flying. Whilst every effort has been made to ensure the accuracy of the information contained within this book, neither CAE Oxford Aviation Academy nor the distributor gives any warranty as to its accuracy or otherwise. Students preparing for the EASA ATPL (A) theoretical knowledge examinations should not regard this book as a substitute for the EASA ATPL (A) theoretical knowledge training syllabus published in the current edition of ‘Part-FCL 1’ (the Syllabus). The Syllabus constitutes the sole authoritative definition of the subject matter to be studied in an EASA ATPL (A) theoretical knowledge training programme. No student should prepare for, or is currently entitled to enter himself/herself for the EASA ATPL (A) theoretical knowledge examinations without first being enrolled in a training school which has been granted approval by an EASA authorised national aviation authority to deliver EASA ATPL (A) training. CAE Oxford Aviation Academy excludes all liability for any loss or damage incurred or suffered as a result of any reliance on all or part of this book except for any liability for death or personal injury resulting from CAE Oxford Aviation Academy’s negligence or any other liability which may not legally be excluded. Printed in Singapore by KHL Printing Co. Pte Ltd ii Introduction I I Introduction iii  I Introduction Textbook Series I Introduction Book Title Subject 1 010 Air Law 2 020 Aircraft General Knowledge 1 Airframes & Systems Fuselage, Wings & Stabilising Surfaces Landing Gear Flight Controls Hydraulics Air Systems & Air Conditioning Anti-icing & De-icing Fuel Systems Emergency Equipment 3 020 Aircraft General Knowledge 2 Electrics – Electronics Direct Current Alternating Current 4 020 Aircraft General Knowledge 3 Powerplant Piston Engines Gas Turbines 5 020 Aircraft General Knowledge 4 Instrumentation Flight Instruments Warning & Recording Automatic Flight Control Power Plant & System Monitoring Instruments 6 030 Flight Performance & Planning 1 Mass & Balance Performance 7 030 Flight Performance & Planning 2 Flight Planning & Monitoring 8 040 Human Performance & Limitations 9 050 Meteorology 10 060 Navigation 1 General Navigation 11 060 Navigation 2 Radio Navigation 12 070 Operational Procedures 13 080 Principles of Flight 14 090 Communications VFR Communications IFR Communications iv  Introduction I Contents I Introduction ATPL Book 13 Principles of Flight 1. Overview and Definitions........................................................ 1 2. The Atmosphere...............................................................23 3. Basic Aerodynamic Theory...................................................... 41 4. Subsonic Airflow.............................................................. 51 5. Lift.......................................................................... 69 6. Drag....................................................................... 109 7. Stalling..................................................................... 143 8. High Lift Devices.............................................................. 207 9. Airframe Contamination....................................................... 231 10. Stability and Control......................................................... 239 11. Controls.................................................................... 331 12. Flight Mechanics............................................................. 363 13. High Speed Flight............................................................ 405 14. Limitations................................................................. 457 15. Windshear................................................................. 487 16. Propellers.................................................................. 501 17. Revision Questions........................................................... 523 18. Index...................................................................... 593 v  I Introduction I Introduction vi  Chapter 1 Overview and Definitions Overview................................................. 3 General Definitions........................................... 7 Glossary................................................. 10 List of Symbols............................................. 14 Greek Symbols............................................. 14 Others.................................................. 15 Self-assessment Questions.......................................16 Answers................................................. 22 1  1 Overview and Definitions 1 Overview and Definitions Figure 1.1 2  Overview and Definitions 1 Overview 1 The primary requirements of an aircraft are as follows: Overview and Definitions a wing to generate a lift force; a fuselage to house the payload; tail surfaces to add stability; control surfaces to change the direction of flight; and engines to make it go forward. The process of lift generation is fairly straightforward and easy to understand. Over the years aircraft designers, aerodynamicists and structural engineers have refined the basics and, by subtle changes of shape and configuration, have made maximum use of the current understanding of the physical properties of air to produce aircraft best suited to a particular role. Aircraft come in different shapes and sizes, each usually designed for a specific task. All aircraft share certain features, but to obtain the performance required by the operator, the designer will configure each type of aeroplane in a specific way. As can be seen from the illustrations on the facing page, the position of the features shared by all types of aircraft i.e. wings, fuselage, tail surfaces and engines varies from type to type. Why are wing plan shapes different? Why are wings mounted sometimes on top of the fuselage instead of the bottom? Why are wings mounted in that position and at that angle? Why is the horizontal stabilizer mounted sometimes high on top of the fin rather than on either side of the rear fuselage? Every feature has a purpose and is never included merely for reasons of style. 3  1 Overview and Definitions An aeroplane, like all bodies, has mass. With the aircraft stationary on the ground it has only 1 the force due to the acceleration of gravity acting upon it. This force, its WEIGHT, acts vertically downward at all times. Overview and Definitions W Figure 1.2 The force of weight Figure 1.1 The Force of Weight Before an aeroplane can leave the ground and fly, the force of weight must be balanced by a force which acts upwards. This force is called LIFT. The lift force must be increased until it is the same as the aeroplane’s weight. L W Figure 1.3 The forces of weight & lift Figure 1.2 The Forces of Weight and Lift 4  Overview and Definitions 1 To generate a lift force, the aeroplane must be propelled forward through the air by a force 1 called THRUST, provided by the engine(s). Overview and Definitions L W Figure 1.4 The forces of weight, lift & thrust From the very moment the aeroplane begins to move, air resists its forward motion with a force called DRAG. L W Figure 1.5 The forces of weight, lift, thrust & drag Figure 1.4 The Forces of Weight, Lift, Thrust and Drag 5  1 Overview and Definitions When an aeroplane is moving there are four main forces acting upon it: 1 WEIGHT, LIFT, THRUST and DRAG. Overview and Definitions These are all closely interrelated, i.e.: The greater the weight - the greater the lift requirement. The greater the lift - the greater the drag. The greater the drag - the greater the thrust required, and so on... Air has properties which change with altitude. Knowledge of these variables, together with their effect on an aeroplane, is a prerequisite for a full understanding of the principles of flight. The structural and aerodynamic design of an aeroplane is a masterpiece of compromise. An improvement in one area frequently leads to a loss of efficiency in another. An aeroplane does not ‘grip’ the air as a car does the road. An aeroplane is often not pointing in the same direction in which it is moving. 6  Overview and Definitions 1 General Definitions 1 Overview and Definitions Mass Unit - Kilogram (kg) - ‘The quantity of matter in a body.’ The mass of a body is a measure of how difficult it is to start or stop. (a “body”, in this context, means a substance. Any substance: a gas, a liquid or a solid.) The larger the mass, the greater the FORCE required to start or stop it in the same distance. M  ass has a big influence on the time and/or distance required to change the direction of a body. Force Unit - newton (N) - ‘A push or a pull’. That which causes or tends to cause a change in motion of a body. There are four forces acting on an aircraft in flight - pushing or pulling in different directions. Weight Unit - newton (N) - ‘The force due to gravity’. ( F = m × g ) where (m) is the mass of the object and (g) is the acceleration due to the gravity constant, which has the value of 9.81 m/s2. ( A 1 kg mass ‘weighs’ 9.81 newtons ) If the mass of a B737 is 60 000 kg and F = m × g it is necessary to generate: [60 000 kg × 9.81 m/s2] 588 600 N of lift force. Centre of Gravity (CG) The point through which the weight of an aircraft acts. An aircraft in flight rotates around its CG. T  he CG of an aircraft must remain within certain forward and aft limits, for reasons of both stability and control. Work Unit - Joule (J) - A force is said to do work on a body when it moves the body in the direction in which the force is acting. The amount of work done on a body is the product of the force applied to the body and the distance moved by that force in the direction in which it is acting. If a force is exerted and no movement takes place, no work has been done. Work = Force × Distance (through which the force is applied) If a force of 10 newtons moves a body 2 metres along its line of action, it does 20 newton metres (Nm) of work. [10 N × 2 m = 20 Nm] A newton metre, the unit of work, is called a joule (J). 7  1 Overview and Definitions Power 1 Unit - Watt (W) - Power is simply the rate of doing work (the time taken to do work). Overview and Definitions Force (N) × Distance (m) Power (W) = Time (s) I f a force of 10 N moves a mass 2 metres in 5 seconds, then the power is 4 joules per second. A joule per second (J/s) is called a watt (W), the unit of power. So the power used in this example is 4 watts. Energy Unit - Joule (J) - Mass has energy if it has the ability to do work. The amount of energy a body possesses is measured by the amount of work it can do. The unit of energy will, therefore, be the same as those of work, joules. Kinetic Energy Unit - Joule (J) - ’The energy possessed by mass because of its motion’. ’A mass that is moving can do work in coming to rest’. KE = ½mV2 joules The kinetic energy of a 1 kg mass of air moving at 52 m/s (100 knots) is 1352 joules; it possesses 1352 joules of kinetic energy. [ 0.5 × 1 × 52 × 52 = 1352 J ] From the above example it can be seen that doubling the velocity will have a greater impact on the kinetic energy than doubling the mass (velocity is squared). Newton’s First Law of Motion ’A body will remain at rest or in uniform motion in a straight line unless acted on by an external force’. To move a stationary object or to make a moving object change its direction, a force must be applied. Inertia ‘The opposition which a body offers to a change in motion’. A property of all bodies, inertia is a quality, but it is measured in terms of mass, which is a quantity. The larger the mass, the greater the force required for the same result. A large mass has a lot of inertia. Inertia refers to both stationary and moving masses. Newton’s Second Law of Motion ’The acceleration of a body from a state of rest, or uniform motion in a straight line, is proportional to the applied force and inversely proportional to the mass’. Velocity Unit - Metres per second (m/s). - ‘Rate of change of displacement’ 8  Overview and Definitions 1 Acceleration 1 Unit - Metres per second per second (m/s2) - ‘Rate of change of velocity’. Overview and Definitions A force of 1 newton acting on a mass of 1 kg will produce an acceleration of 1 m/s2 Force Acceleration = Mass For the same mass; the bigger the force, the greater the acceleration. For the same force; the larger the mass, the slower the acceleration. Momentum Unit - Mass × Velocity (kg-m/s) - ‘The quantity of motion possessed by a body’. The tendency of a body to continue in motion after being placed in motion. A body of 10 kg mass moving at 2 m/s has 20 kg-m/s of momentum. At the same velocity, a large mass has more momentum than a small mass. Newton’s Third Law ‘Every action has an equal and opposite reaction’ I f a force accelerates a mass in one direction, the body supplying the force will be subject to the same force in the opposite direction. 9  1 Overview and Definitions Glossary 1 Overview and Definitions Aerofoil - A body so shaped as to produce aerodynamic reaction normal to the direction of its motion through the air without excessive drag. Aft - To the rear, back or tail of the aircraft. Air brake - Any device primarily used to increase drag of an aircraft at will. Ambient - Surrounding or pertaining to the immediate environment. Amplitude - Largeness; abundance; width; range; extent of repetitive movement (from extreme to extreme). Attitude - The nose-up or nose-down orientation of an aircraft relative to the horizon. Boundary Layer - The thin layer of air adjacent to a surface, in which the viscous forces are dominant. Buffeting - An irregular oscillation of any part of an aircraft produced and maintained directly by an eddying flow. Cantilever (wing) - A wing whose only attachment to the fuselage is by fittings at the wing root: it has no external struts or bracing. The attachments are faired-in to preserve the streamline shape Control Lock (Gust lock) - A mechanical device designed to safeguard, by positive lock, the control surfaces and flying control system against damage in high winds or gusts when the aircraft is parked. Control Reversal - At high speed: the displacement of a control surface producing a moment on the aircraft in a reverse sense because of excessive structural distortion. At low speed: the displacement of an aileron increasing the angle of attack of one wing to or beyond the critical angle, causing a roll in the direction opposite to that required. Convergent - Tend towards or meet in one point or value. Critical Mach Number (MCRIT) - The free stream Mach number at which the peak velocity on the surface of a body first becomes equal to the local speed of sound. Damping - To slow down the rate; to diminish the amplitude of vibrations or cycles. Geometric Dihedral - The angle between the horizontal datum of an aeroplane and the plane of a wing or horizontal stabilizer semi-span. Divergent - Inclined or turned apart. Divergence - A disturbance which increases continually with time. Eddy - An element of air having intense vorticity. Effective Angle of Attack (αe) - The angle between the chord line and the mean direction of a non-uniform disturbed airstream. 10  Overview and Definitions 1 Equilibrium - A condition that exists when the sum of all moments acting on a body is zero 1 AND the sum of all forces acting on a body is zero. Overview and Definitions Fairing - A secondary structure added to any part to reduce its drag. Feel - The sensations of force and displacement experienced by the pilot from the aerodynamic forces on the control surfaces. Fence - A projection from the surface of the wing and extending chordwise to modify the wing surface pressure distribution. Fillet - A fairing at the junction of two surfaces to improve the airflow. Flight Path - The path of the Centre of Gravity (CG) of an aircraft. Fluid - A substance, either gaseous or liquid, that will conform to the shape of the container that holds it. Free Stream Velocity - The velocity of the undisturbed air relative to the aircraft. Gradient (Pressure) - Rate of change in pressure with distance. Gust - A rapid variation, with time or distance, in the speed or direction of air. Gust Lock - See control lock. Instability - The quality whereby any disturbance from steady motion tends to increase. Laminar Flow - Flow in which there is no mixing between adjacent layers. Load Factor - The ratio of the weight of an aircraft to the load imposed by lift. The correct symbol for load factor is (n), but it is colloquially known as (g). Lift Load Factor = Weight Mach Number (M) - The ratio of the True Airspeed to the speed of sound under prevailing atmospheric conditions. TAS M = Local Speed of Sound (a) Magnitude - Largeness; size; importance. Moment (N-m) - The moment of a force about a point is the product of the force and the distance through which it acts. The distance in the moment is merely a leverage and no movement is involved, so moments cannot be measured in joules. Nacelle - A streamlined structure on a wing for housing engines (usually). Normal - Perpendicular; at 90°. Oscillation - Swinging to and fro like a pendulum; a vibration; variation between certain limits; fluctuation. Parallel - Lines which run in the same direction and which will never meet or cross. 11  1 Overview and Definitions Pitot Tube - A tube, with an open end facing up-stream, wherein at speeds less than about four 1 tenths the speed of sound the pressure is equal to the total pressure. For practical purposes, total pressure may be regarded as equal to pitot pressure at this stage. Overview and Definitions Pod - A nacelle supported externally from a fuselage or wing. Propagate - To pass on; to transmit; to spread from one to another. Relative Airflow, (Relative Wind), (Free Stream Flow) - The direction of airflow produced by the aircraft moving through the air. The relative airflow flows in a direction parallel and opposite to the direction of flight. Therefore, the actual flight path of the aircraft determines the direction of the relative airflow. Also, air in a region where pressure, temperature and relative velocity are unaffected by the passage of the aircraft through it. Scale - If a 1/10th scale model is considered, all the linear dimensions are 1/10th of the real aircraft, but the areas are 1/100th; and if the model is constructed of the same materials, the mass is 1/1000th of the real aircraft. So the model is to scale in some respects, but not others. Schematic - A diagrammatic outline or synopsis; an image of the thing; representing something by a diagram. Separation - Detachment of the airflow from a surface with which it has been in contact. Shock Wave - A narrow region, crossing the streamlines, through which there occur abrupt increases in pressure, density, and temperature, and an abrupt decrease in velocity. The normal component of velocity relative to the shock wave is supersonic upstream and subsonic downstream. Side-slip - Motion of an aircraft, relative to the relative airflow, which has a component of velocity along the lateral axis. Slat - An auxiliary, cambered aerofoil positioned forward of the main aerofoil so as to form a slot. Spar - A principal spanwise structural member of a wing, tailplane, fin or control surface. Speed - Metres per second (m/s) is used in most formulae, but nautical miles per hour or knots (kt) are commonly used to measure the speed of an aircraft. There are 6080 ft in 1 nautical mile and 3.28 ft in 1 metre. Speed of Sound (a) - Sound is pressure waves which propagate spherically through the atmosphere from their source. The speed of propagation varies ONLY with the temperature of the air. The lower the temperature, the lower the speed of propagation. On a ’standard’ day at sea level the speed of sound is approximately 340 m/s (660 kt TAS). Stability - The quality whereby any disturbance of steady motion tends to decrease. Stagnation Point - A point where streamlines are divided by a body and where the fluid speed is zero, relative to the surface. Static Vent - A small aperture in a plate fixed to form part of the fuselage and located appropriately for measuring the ambient static pressure. Throat - A section of minimum area in a duct. 12  Overview and Definitions 1 True Airspeed (TAS) or (V) - The speed at which the aircraft is travelling through the air. 1 Turbulent Flow - Flow in which irregular fluctuations with time are superimposed on a mean Overview and Definitions flow. Velocity - The same as speed, but with direction specified as well. Viscosity - The resistance of fluid particles to flow over each other. All fluids have the property of viscosity. A fluid with high viscosity would not flow very easily. The viscosity of air is low in comparison to something like syrup, but the viscosity that air does have is a very important consideration when studying aerodynamics. Vortex - A region of fluid in circulatory motion, having a core of intense vorticity, the strength of the vortex being given by its circulation. Vortex Generator - A device, often a small vane attached to a surface, to produce one or more discrete vortices which trail downstream adjacent to the surface, promote mixing in the boundary layer and delay boundary layer separation. (Increases the kinetic energy of the boundary layer). Vorticity - Generally, rotational motion in a fluid, defined, at any point in the fluid, as twice the mean angular velocity of a small element of fluid surrounding the point. Wake - The region of air behind an aircraft in which the total pressure has been changed by the presence of the aircraft. Wash-out - Decrease in angle of incidence towards the tip of a wing or other aerofoil. Wing Loading - Ratio of aircraft weight to wing area. Aircraft Weight Wing Loading = Wing Area Zoom - Using kinetic energy to gain height. 13  1 Overview and Definitions List of Symbols 1 Overview and Definitions The following symbols are used throughout these notes. However, no universal defining standard for their use exists. Other books on the subject may use some of these symbols with different definitions. Every effort has been made to employ symbols that are widely accepted and that conform to the Learning Objectives. a speed of sound AC aerodynamic centre AR aspect ratio b span C Centigrade c chord length CD drag coefficient CG centre of gravity CP centre of pressure CL lift coefficient CM pitching moment coefficient D drag Di induced drag F force g acceleration due to gravity, also used for load factor K Kelvin L lift L/D lift to drag ratio M Mach number m mass n load factor p pressure Q or q dynamic pressure S area; wing area T temperature t/c thickness-chord ratio V free stream speed (TAS) VS stall speed W weight Greek Symbols α (alpha) angle of attack β (beta) sideslip angle γ (gamma) angle of climb or descent Δ (delta) increment in μ (mu) Mach angle ρ (rho) density σ (sigma) relative density φ (phi) angle of bank 14  Overview and Definitions 1 Others 1 ∝ Overview and Definitions proportional to = is approximately equal to Note: The Greek symbol γ (gamma) has been used in these notes to denote angle of climb and descent. The Learning Objectives use θ (theta). Evidence exists that a question in the exam uses γ (gamma) for angle of climb and descent. The notes have been amended to use γ, but consider either γ or θ to indicate angle of climb and descent. 15  1 Questions Self-assessment Questions 1 Questions Aircraft (1) Mass: 2000 kilograms (kg) Engine thrust: 4000 newtons (N) V1 speed: 65 knots (kt) Take-off run to reach V1: 750 metres (m) Time taken to reach V1: 30 seconds (s) Aircraft (2) Mass: 2000 kilograms (kg) Engine thrust: 8000 newtons (N) V1 speed: 130 knots (kt) Take-off run to reach V1: 1500 metres (m) Time taken to reach V1: 40 seconds (s) where 1 nautical mile = 6080 ft and 1 metre = 3.28 ft At V1 both aircraft experience an engine failure and take-off is abandoned. a. How much work was done to aircraft (1) getting to V1? b. How much power was used to get aircraft (1) to V1? c. How much work was done to aircraft (2) getting to V1? d. How much power was used to get aircraft (2) to V1? e. How much momentum does aircraft (1) possess at V1? f. How much momentum does aircraft (2) possess at V1? g. How many times greater is the momentum of aircraft (2)? h. How much kinetic energy does aircraft (1) possess at V1? i. How much kinetic energy does aircraft (2) possess at V1? j. How many times greater is the kinetic energy of aircraft (2)? k. State the mass and velocity relationship of both aircraft and compare to their momentum and kinetic energy. l. Which has the greater effect on kinetic energy, mass or velocity? m. What must be done with the kinetic energy so the aircraft can be brought to a stop? 16  Questions 1 1. An aircraft’s mass is a result of: 1 a. its weight. Questions b. how big it is. c. how much matter it contains. d. its volume. 2. The unit of mass is the: a. joule. b. watt. c. newton. d. kilogram. 3. The definition of a force is: a. that which causes a reaction to take place. b. thrust and drag only. c. a push or a pull. d. the result of an applied input. 4. The unit of force is the: a. mass-kilogram. b. newton-metre. c. joule. d. newton. 5. The unit of weight is the: a. kilogram. b. newton. c. watt. d. kilowatt. 6. Weight is the result of: a. the force on mass due to gravity. b. the action of a falling mass. c. how much matter the object contains. d. the rate of mass per unit area. 7. About which point does an aircraft rotate? a. The wings. b. The main undercarriage. c. The centre of gravity. d. The rudder. 8. If a force is applied to a mass and the mass does not move: a. work is done even though there is no movement of the mass. b. work is done only if the mass moves a long way. c. power is exerted, but no work is done. d. no work is done. 17  1 Questions 9. The unit of work is called the: 1 a. pascal. Questions b. joule. c. watt. d. kilogram. 10. The unit of power is called the: a. joule. b. newton-metre. c. watt. d. metre per second. 11. If a force of 20 newtons moves a mass 5 metres: 1 - the work done is 100 Nm 2 - the work done is 100 joules 3 - the work done is 4 joules 4 - the work done is 0.25 joules The correct statements are: a. 1 only. b. 1 and 3. c. 1 and 2. d. 2 only. 12. If a force of 50 newtons is applied to a 10 kg mass and the mass moves 10 metres and a force of 50 newtons is applied to a 100 kg mass which moves 10 metres: a. the work done is the same in both cases. b. less work is done to the 10 kg mass. c. more work is done to the 10 kg mass. d. more work is done to the 100 kg mass. 13. The definition of power is: a. the rate of force applied. b. the rate of movement per second. c. the rate of doing work. d. the rate of applied force. 14. If a force of 500 newtons moves a mass 1000 metres in 2 mins, the power used is: a. 4167 watts. b. 250 kilowatts. c. 1 megawatt. d. 4 watts. 15. Kinetic energy is: a. the energy a mass possesses due to its position in space. b. the energy a mass possesses when a force has been applied. c. the energy a mass possesses due to the force of gravity. d. the energy a mass possesses because of its motion. 18  Questions 1 16. The unit of kinetic energy is the: 1 a. joule. Questions b. metre per second. c. watt. d. newton-metre per second. 17. When considering kinetic energy: 1 - a moving mass can apply a force by being brought to rest. 2 - kinetic energy is the energy possessed by a body because of its motion. 3 - if a body’s kinetic energy is increased, a force must have been applied. 4 - kinetic energy = ½ m V2 joules. The combination of correct statements is: a. 1 and 2. b. 1, 2, 3 and 4. c. 4 only. d. 2 and 4. 18. The property of inertia is said to be: a. the energy possessed by a body because of its motion. b. the opposition which a body offers to a change in motion. c. that every action has an equal and opposite reaction. d. the quantity of motion possessed by a body. 19. Considering Newton’s first law of motion: 1 - a body is said to have energy if it has the ability to do work. 2 - the amount of energy a body possesses is measured by the amount of work it can do. 3 - a body will tend to remain at rest, or in uniform motion in a straight line, unless acted upon by an external force. 4 - to move a stationary object or to make a moving object change its direction, a force must be applied. The combination with the correct statements is: a. 3 and 4. b. 3 only. c. 1 and 2. d. 1, 2, 3 and 4. 19  1 Questions 20. Considering Newton’s second law of motion: 1 1 - every action has an equal and opposite reaction. Questions 2 - if the same force is applied, the larger the mass the slower the acceleration. 3 - if two forces are applied to the same mass, the bigger the force the greater the acceleration. 4 - the acceleration of a body from a state of rest, or uniform motion in a straight line, is proportional to the applied force and inversely proportional to the mass. The combination of true statements is: a. 1 only. b. 1, 2, 3 and 4. c. 2, 3, and 4. d. 3 and 4. 21. Newton’s third law of motion states: a. the energy possessed by a mass is inversely proportional to its velocity. b. every force has an equal and opposite inertia. c. for every force there is an action. d. every action has an equal and opposite reaction. 22. The definition of velocity is the: a. rate of change of acceleration. b. rate of change of displacement. c. the quantity of motion possessed by a body. d. the acceleration of a body in direct proportion to its mass. 23. When considering acceleration: 1 - acceleration is the rate of change of velocity. 2 - the units of acceleration are metres per second. 3 - the units of acceleration are kilogram-metres per second. 4 - the units of acceleration are seconds per metre per metre. The combination of correct statements is: a. 4 only. b. 1 and 4. c. 1 only. d. 1 and 2. 24. The definition of momentum is: a. the quantity of mass possessed by a body. b. the quantity of inertia possessed by a body. c. the quantity of motion possessed by a body. d. the opposition which a body offers to a change in velocity. 20  Questions 1 25. A force of 24 newtons moves a 10 kg mass 60 metres in 1 minute. The power used 1 is: Questions 1 - 24 watts. 2 - 240 watts. 3 - force times distance moved in one second. 4 - force times the distance the mass is moved in one second. Which of the preceding statements are correct: a. 1 and 3. b. 1, 3 and 4. c. 2 and 4. d. 4 only. 26. When considering momentum: 1 - momentum is the quantity of motion possessed by a body. 2 - momentum is the tendency of a body to continue in motion after being placed in motion. 3 - a mass of 2000 kg moving at 55 m/s has 110 000 kg-m/s of momentum. 4 - a large mass moving at 50 m/s will have less momentum than a small mass moving at 50 m/s. The correct combination of statements is: a. 1 and 3. b. 1, 2, 3 and 4. c. 1, 2 and 3. d. 2, 3 and 4. 21  1 Answers Answers 1 Answers Aircraft number (1) V1 speed of 65 knots = 33.5 m/s Aircraft number (2) V1 speed of 130 knots = 67 m/s a. 3 000 000 joules b. 100 000 watts c. 12 000 000 joules d. 300 000 watts e 67 000 kg-m/s f. 134 000 kg-m/s g. twice h. 1 122 250 joules i. 4 489 000 joules j. four times greater k. same mass, speed doubled, momentum doubled, but kinetic energy four times greater. l. velocity has a greater effect on kinetic energy than mass. m. it must be dissipated by the braking systems. 1 2 3 4 5 6 7 8 9 10 11 12 c d c d b a c d b c c a 13 14 15 16 17 18 19 20 21 22 23 24 c a d a b b a c d b c c 25 26 b c 22  Chapter 2 The Atmosphere Introduction.............................................. 25 The Physical Properties of Air..................................... 25 Static Pressure............................................. 25 Temperature.............................................. 26 Air Density............................................... 26 International Standard Atmosphere (ISA).............................. 26 Dynamic Pressure............................................ 27 Key Facts................................................ 29 Measuring Dynamic Pressure..................................... 30 Relationships between Airspeeds................................... 31 Airspeed................................................ 32 Errors and Corrections......................................... 32 V Speeds................................................ 33 Summary................................................ 34 Questions................................................ 35 Answers................................................. 40 23  2 The Atmosphere 2 The Atmosphere 24  The Atmosphere 2 Introduction The atmosphere is the medium in which an aircraft operates. It is the properties of the 2 atmosphere, changed by the shape of the wing, that generate the required lift force. The Atmosphere The most important property is air density (the “thickness” of air). KEY FACT: If air density decreases, the mass of air flowing over the aircraft in a given time will decrease. Not usually considered during the study of Principles of Flight, keeping the idea of mass flow (kg/s) in the ‘back of your mind’ can aid general understanding. A given mass flow will generate the required lift force, but a decrease in air density will reduce the mass flow. To maintain the required lift force if density decreases, the speed of the aircraft through the air must be increased. The increased speed of airflow over the wing will maintain the mass flow and lift force at its required value. The Physical Properties of Air Air has substance! Air has mass; not very much if compared to other matter, but nevertheless a significant amount. A mass of moving air has considerable kinetic energy; for example, when moving at 100 knots the kinetic energy of air can inflict severe damage to man-made structures. Air is a compressible fluid and is able to flow or change its shape when subjected to even minute pressure differences. (Air will flow in the direction of the lower pressure). The viscosity of air is so low that very small forces are able to move the molecules in relation to each other. When considering the portion of atmosphere in which most aircraft operate (up to 40 000 ft), with increasing altitude the characteristics of air undergo a gradual transition from those at sea level. Since air is compressible, the lower layers contain much the greater part of the whole mass of the atmosphere. Pressure falls steadily with increasing altitude, but temperature falls steadily only to about 36 000 ft, above which it then remains constant through the stratosphere. Static Pressure The unit for static pressure is N/m2, the symbol is lower case ‘p’. S tatic pressure is the result of the weight of the atmosphere pressing down on the air beneath. S tatic pressure will exert the same force per square metre on all surfaces of an aeroplane. The lower the altitude, the greater the force per square metre. It is called static pressure because of the air’s stationary or static presence. An aircraft always has static pressure acting upon it. Newtons per square metre is the SI unit for pressure. 1 N/m2 is called a pascal and is quite a small unit. In aviation the hectopascal (hPa) is used. (‘hecto’ means 100 and 1 hectopascal is the same as 1 millibar). 25  2 The Atmosphere Static pressure at a particular altitude will vary from day to day, and is about 1000 hPa at sea level. In those countries that measure static pressure in inches of mercury (inHg), sea level static pressure is about 30 inHg. 2 Temperature The Atmosphere The unit for temperature is °C, or K. It is degrees Celsius (or centigrade) when measured relative to the freezing point of water, or Kelvin when measured relative to absolute zero. (0°C is equivalent to 273 K). Temperature decreases with increasing altitude up to about 36 000 ft and then remains constant. Air Density The unit for density is kg/m3 and the symbol is the Greek letter ρ [rho]. Density is ‘mass per unit volume’ (The ‘number’ of air particles in a given space). Density varies with static pressure, temperature and humidity. Density decreases if static pressure decreases. Density decreases if temperature increases. Density decreases if humidity increases. Air Density is proportional to pressure and inversely proportional to temperature. This is shown in the ideal gas law formula below. P P = constant, more usefully it can be said that ρ ∝ Tρ T where p = pressure, T = temperature, and ρ = density Density decreases with increasing altitude because of decreasing static pressure. However, with increasing altitude temperature also decreases, which would tend to increase density, but the effect of decreasing static pressure is dominant. International Standard Atmosphere (ISA) The values of temperature, pressure and density are never constant in any given layer of the atmosphere. To enable accurate comparison of aircraft performance and the calibration of pressure instruments, a ‘standard’ atmosphere has been adopted. The standard atmosphere represents the mean or average properties of the atmosphere. Europe uses the standard atmosphere defined by the International Civil Aviation Organization (ICAO). The ICAO standard atmosphere assumes the following mean sea level values: Temperature 15°C Pressure 1013.25 hPa Density 1.225 kg/m3 26  The Atmosphere 2 The temperature lapse rate is assumed to be uniform at a rate of 2°C per 1000 ft (1.98°C) from mean sea level up to a height of 36 090 ft (11 000 m) above which the lapse rate becomes zero and the temperature remains constant at -56.5°C. 2 ICAO Standard Atmosphere The Atmosphere Altitude Temperature Pressure (hPa) Density (kg/m3) Relative Density (ft) (°C) (p) (ρ) (σ) 50 000 - 56.5 116.0 0.186 0.15 45 000 - 56.5 147.5 0.237 0.19 40 000 - 56.5 187.6 0.302 0.25 35 000 - 54.3 238.4 0.386 0.31 30 000 - 44.4 300.9 0.458 0.37 25 000 - 34.5 376.0 0.549 0.45 20 000 - 24.6 465.6 0.653 0.53 15 000 - 14.7 571.8 0.771 0.63 10 000 - 4.8 696.8 0.905 0.74 5000 5.1 843.1 1.056 0.86 Sea Level 15 1013.25 1.225 1.0 NOTE: High Density Altitude means that the conditions that actually exist at the airport of take- off or landing represent those of a higher altitude in the International Standard Atmosphere i.e. less air density. Dynamic Pressure The unit for dynamic pressure is N/m2 and the symbol is lower case ‘q’ or upper case ‘Q’.  ecause air has mass, air in motion must possess kinetic energy, and will exert a force per B square metre on any object in its path. (KE = ½ m V2) It is called DYNAMIC pressure because the air is moving in relation to the object being considered, in this case an aircraft. D  ynamic pressure is proportional to the density of the air and the square of the speed of the air flowing over the aircraft. An aircraft immersed in moving airflow will therefore experience both static AND dynamic pressure. (Remember, static pressure is always present). 27  2 The Atmosphere The kinetic energy of one cubic metre of air moving at a stated speed is given by the formula: Kinetic Energy = ½ ρ V2 joules 2 where ρ is the local air density in kg/m3 and V is the speed in m/s The Atmosphere If this cubic metre of moving air is completely trapped and brought to rest by means of an open-ended tube the total energy will remain constant, but by being brought completely to rest the kinetic energy will become pressure energy which, for all practical purposes, is equal to: Dynamic Pressure = ½ ρ V2 N/m2 Consider air flowing at 52 m/s (100 kt) with a density of 1.225 kg/m3 (100 kt = 100 NM/h = 100 × 6080 ft/h = 608 000 ÷ 3.28 = 185 366 ÷ 60 ÷ 60 m/s = 52 m/s) Dynamic pressure = 0.5 × 1.225 × 52 × 52 = 1656 N/m2 (16.56 hPa) If speed is doubled, dynamic pressure will be four times greater 0.5 × 1.225 × 104 × 104 = 6625 N/m2 (66.25 hPa) If the cross-sectional area of the tube is 1 m2 a force of ½ ρ V2 newtons will be generated. (Force = Pressure × Area) Dynamic pressure ( ½ ρ V2 ) is common to ALL aerodynamic forces and determines the air loads imposed on an aeroplane moving through the air. The symbol for dynamic pressure ( ½ ρ V2 ) is q or Q Q = ½ ρ V2 28  The Atmosphere 2 Key Facts A pilot needs to know how much dynamic pressure is available, but dynamic pressure cannot 2 be measured on its own because static pressure will always be present. The sum of static and The Atmosphere dynamic pressure, in this context, is known as ‘Total’ pressure. (Dynamic + Static pressure can also be referred to as Stagnation or Pitot pressure). Total Pressure = Static Pressure + Dynamic Pressure This can be re-arranged to show that: Total Pressure - Static Pressure = Dynamic Pressure The significance of dynamic pressure to the understanding of Principles of Flight cannot be overemphasized. Because dynamic pressure is dependent upon air density and the speed of the aircraft through the air, it is necessary for students to fully appreciate the factors which affect air density. Temperature - increasing temperature decreases air density. Changes in air density due to air temperature are significant during all phases of flight. S  tatic pressure - decreasing static pressure decreases air density. Changes in air density due to static pressure are significant during all phases of flight. Humidity - increasing humidity decreases air density. (The reason increasing humidity decreases air density is that the density of water vapour is about 5/8 that of dry air). Humidity is most significant during take-off and landing. Increasing altitude will decrease air density because the effect of decreasing static pressure is more dominant than decreasing temperature. 29  2 The Atmosphere Measuring Dynamic Pressure All aerodynamic forces acting on an aircraft are determined by dynamic pressure, so it is 2 essential to have some means of measuring dynamic pressure and presenting that information The Atmosphere to the pilot. A sealed tube, open at the forward end, is located where it will collect air when the aircraft is moving. The pressure in the tube (pitot tube) is Dynamic + Static and, in this context, is called “Pitot” pressure (because the air is inside the pitot tube). Some way of ‘removing’ the static pressure from the pitot pressure must be found. A hole (vent) in a surface parallel to the airflow will sense static pressure. Referring to the diagram below, if the pressure from the pitot tube is fed to one side of a diaphragm mounted in a sealed case, and static pressure is fed to the other side, the two static pressures will cancel each other and the diaphragm movement will be influenced only by changes in dynamic pressure. Movement of the diaphragm moves a pointer over a scale so that changes in dynamic pressure can be observed by the flight crew. But the instrument is calibrated at ISA sea level density, so the instrument will only give a ‘true’ indication of the speed of the aircraft through the air when the air density is 1.225 kg/m3. This is not a problem because the pilot needs an indication of dynamic pressure, and this is what the instrument provides. The instrument is made in such a way that it indicates the square root of the dynamic pressure in nautical miles per hour (knots) or statute miles per hour (mph). So, if this “Indicated Airspeed” is doubled, the speed of the aircraft through the air will also be doubled. The Airspeed Indicator is a pressure gauge Airflow PITOT PRESSURE PITOT TUBE (Static + Dynamic) Needle indicates changes in DYNAMIC PRESSURE Airflow STATIC STATIC VENT PRESSURE Figure 2.1 Schematic of the airspeed indicator (ASI) 30  The Atmosphere 2 Relationships between Airspeeds Indicated Airspeed: (IAS). The speed registered on the Airspeed Indicator. 2 The Atmosphere Calibrated Airspeed: (CAS). An accurate measure of dynamic pressure when the aircraft is flying slowly. The position of the pitot tube(s) and static vent(s), together with the aircraft’s configuration (flaps, landing gear etc.) and attitude to the airflow (angle of attack and sideslip) will affect the pressures sensed, particularly the pressures sensed at the static vent(s). Under the influence of the above conditions a false dynamic pressure (IAS) will be displayed. When IAS is corrected for this ‘position’ or ‘pressure’ error, as it is called, the resultant is Calibrated Airspeed. (The airspeed corrections to be applied may be displayed on a placard on the flight-deck, or in the Flight Manual, and will include any instrument error). Equivalent Airspeed: (EAS). An accurate measure of dynamic pressure when the aircraft is flying fast. Air entering the pitot tube(s) is compressed, which gives a false dynamic pressure (IAS) reading, but only becomes significant at higher speeds. At a given air density, the amount of compression depends on the speed of the aircraft through the air. When the IAS is corrected for ‘position’ AND ‘compressibility’ error, the resultant is Equivalent Airspeed. True Airspeed: (TAS) or (V). The speed of the aircraft through the air. THE ONLY SPEED THERE IS - All the other, so called, speeds are pressures. TAS = EAS Where, б is Relative Density √б The Airspeed Indicator is calibrated for ‘standard’ sea level density, so it will only read TAS if the density of the air through which the aircraft is flying is 1.225 kg/m3. Thus at 40 000 ft where the ‘standard’ density is one quarter of the sea-level value, to maintain the same EAS the aircraft will have to move through the air twice as fast! The Speed of Sound: (a) Sound is ‘weak’ pressure waves which propagate spherically through the atmosphere from their source. The speed at which pressure waves propagate is proportional to the square root of the absolute temperature of the air. The lower the temperature, the lower the speed of propagation. On a ‘standard’ day at sea level the speed of sound is approximately 340 m/s (660 kt TAS). At higher aircraft True Airspeeds (TAS) and/or higher altitudes, it is essential to know the speed of the aircraft in relation to the local speed of sound. This speed relationship is known as the Mach Number (M). TAS M = Where (a) is the Local Speed of Sound (a) If the True Airspeed of the aircraft is four tenths the speed at which pressure waves propagate through the air mass surrounding the aircraft, the Mach meter will register M 0.4 Critical Mach Number: (MCRIT) The critical Mach number is the Mach number of the aircraft when the speed of the airflow over some part of the aircraft (usually the point of maximum thickness on the aerofoil) first reaches the speed of sound. 31  2 The Atmosphere Airspeed This information is to reinforce that contained in the preceding paragraphs. 2 The Atmosphere The airspeed indicator is really a pressure gauge, the ‘needle’ of which responds to changes in dynamic pressure (½ ρ V2 ). The Airspeed Indicator is a Pressure Gauge Calibration of the airspeed indicator is based on standard sea level density (1.225 kg/m3). The “airspeed” recorded will be different from the actual speed of the aircraft through the air unless operating under standard sea level conditions (unlikely). The actual speed of the aircraft relative to the free stream is called true airspeed (TAS), and denoted by (V). The ‘speed’ recorded by the airspeed indicator calibrated as above, if there are no other errors, is called equivalent airspeed (EAS). It may seem to be a drawback that the instrument records equivalent rather than true airspeed, but the true airspeed may always be determined from it. Also, many of the handling characteristics of an aircraft depend mainly on the dynamic pressure, i.e. on the equivalent airspeed, so it is often more useful to have a direct reading of EAS than TAS. Errors and Corrections An airspeed indicator is, however, also subject to errors other than that due to the difference between the density of the air through which it is flying and standard sea level density. I nstrument Error: This error may arise from the imperfections in the design and manufacture of the instrument, and varies from one instrument to another. Nowadays this type of error is usually very small and for all practical purposes can be disregarded. Where any instrument error does exist, it is incorporated in the calibrated airspeed correction chart for the particular aeroplane. P  osition Error (Pressure Error): This error is of two kinds, one relating to the static pressure measurement, the other to the pitot (total) pressure measurement. The pitot tube(s) and static port(s) may be mounted in a position on the aircraft where the flow is affected by the presence of the aircraft, changes in configuration (flaps and maybe gear) and proximity to the ground (ground effect). If so, the static pressure recorded will be the local and not the free stream value. The pitot pressure may be under-recorded because of incorrect alignment - the tube(s) may be inclined to the airstream instead of facing directly into it (changes in angle of attack, particularly at low speeds). The magnitude of the consequent errors will generally depend on the angle of attack and, hence, the speed of the aircraft.  ompressibility Error: At high speeds, the dynamic pressure is not simply ½ ρ V2, but exceeds C it by a factor determined by Mach number. Thus the airspeed indicator will over-read. Because of the errors listed, the ‘speed’ recorded on the airspeed indicator is generally not the equivalent airspeed. It is called instead the indicated airspeed. Corrections to rectify the instrument and position errors are determined experimentally. In flight, using special instruments, measurements are taken over the whole range of speeds and configurations, from which a calibration curve is obtained which gives the corrections appropriate to each indicated airspeed. The compressibility error correction may be obtained by calculation. 32  The Atmosphere 2 The indicated airspeed, after correction for instrument, position (pressure) and compressibility errors, gives the equivalent airspeed ½ ρ V2. 2 V Speeds The Atmosphere These include: VS , V1 , VR , V2 , VMD , VMC , VYSE and many others - these are all Calibrated Airspeeds because they relate to aircraft operations at low speed. However, the appropriate corrections are made and these speeds are supplied to the pilot in the Flight Manual as IAS. VMO - The maximum operating IAS is, however, an EAS because it is a high speed, but again it is supplied to the pilot in the Flight Manual as an IAS. 33  2 The Atmosphere Summary Dynamic pressure (Q) is affected by changes in air density. 2 The Atmosphere Q = ½ ρ V2 Air density decreases if atmospheric pressure decreases. Air density decreases if air temperature increases. Air density decreases if humidity increases. With the aircraft on the ground: Taking off from an airfield with low atmospheric pressure and/or high air temperature and/or high humidity will require a higher TAS to achieve the same dynamic pressure (IAS). For the purpose of general understanding: A constant IAS will give constant dynamic pressure. Increasing altitude decreases air density because of decreasing static pressure. With the aircraft airborne: As altitude increases, a higher TAS is required to maintain a constant dynamic pressure. Maintaining a constant IAS will compensate for changes in air density. There is only one speed, the speed of the aircraft through the air, the TAS. All the other, so called, speeds are pressures. The Airspeed Indicator is a pressure gauge. Aircraft ‘V’ speeds are CAS, except VMO which is an EAS, but all are presented to the pilot in the Flight Manual as IAS. 34  Questions 2 Questions 1. When considering air: 2 Questions 1 - air has mass. 2 - air is not compressible. 3 - air is able to flow or change its shape when subject to even small pressures. 4 - the viscosity of air is very high. 5 - moving air has kinetic energy. The correct combination of all true statements is: a. 1, 2, 3 and 5. b. 2, 3 and 4. c. 1 and 4. d. 1, 3, and 5. 2. Why do the lower layers contain the greater proportion of the whole mass of the atmosphere? a. Because air is very viscous. b. Because air is compressible. c. Because of greater levels of humidity at low altitude. d. Because air has very little mass. 3. With increasing altitude, up to about 40 000 ft, the characteristics of air change: 1 - temperature decreases continuously with altitude. 2 - pressure falls steadily to an altitude of about 36 000 ft, where it then remains constant. 3 - density decreases steadily with increasing altitude. 4 - pressure falls steadily with increasing altitude. The combination of true statements is: a. 3 and 4. b. 1, 2 and 3. c. 2 and 4. d. 1 and 4. 4. When considering static pressure: 1 - in aviation, static pressure can be measured in hectopascals. 2 - the SI unit for static pressure is N/m2. 3 - static pressure is the product of the mass of air pressing down on the air beneath. 4 - referred to as static pressure because of the air’s stationary or static presence. 5 - the lower the altitude, the greater the static pressure. The correct statements are: a. 2, 4 and 5. b. 1, 2, 3, 4 and 5. c. 1, 3 and 5. d. 1 and 5. 35  2 Questions 5. When considering air density: 1 - density is measured in millibars. 2 2 - density increases with increasing altitude. 3 - if temperature increases, the density will increase. Questions 4 - as altitude increases, density will decrease. 5 - temperature decreases with increasing altitude, and this will cause air density to increase The combination of correct statements is: a. 4 only. b. 4 and 5. c. 5 only. d. 2, 3 and 5. 6. Air density is: a. mass per unit volume. b. proportional to temperature and inversely proportional to pressure. c. independent of both temperature and pressure. d. dependent only on decreasing pressure with increasing altitude. 7. When considering the ICAO International Standard Atmosphere and comparing it with the actual atmosphere, which of the following statements is correct? 1 - Temperature, pressure and density are constantly changing in any given layer of the actual atmosphere. 2 - A requirement exists for a hypothetical ’standard’ atmosphere. 3 - The values given in the International Standard Atmosphere exist at the same altitudes in the actual atmosphere. 4- The International Standard Atmosphere was designed for the calibration of pressure instruments and the comparison of aircraft performance calculations. a. 1, 2 and 3. b. 2, 3 and 4. c. 1, 2, 3 and 4. d. 1, 2 and 4. 8. When considering the ICAO International Standard Atmosphere, which of the following statements is correct? 1 - The temperature lapse rate is assumed to be uniform at 2°C per 1000 ft (1.98°C) up to a height of 11 000 ft. 2 - Sea level temperature is assumed to be 15°C. 3 - Sea level static pressure is assumed to be 1.225 kg/m3. 4 - Sea level density is assumed to be 1013.25 hPa. a. 1, 2, 3 and 4. b. No statements are correct. c. 1, 3 and 4. d. 2 only. 36  Questions 2 9. A moving mass of air possesses kinetic energy. An object placed in the path of such a moving mass of air will be subject to which of the following? 2 a. Dynamic pressure. b. Static pressure. Questions c. Static pressure and dynamic pressure. d. Dynamic pressure minus static pressure. 10. Dynamic pressure is: a. the total pressure at a point where a moving airflow is brought completely to rest. b. the amount by which the pressure rises at a point where a moving airflow is brought completely to rest. c. the pressure due to the mass of air pressing down on the air beneath. d. the pressure change caused by heating when a moving airflow is brought completely to rest. 11. Dynamic pressure is equal to: a. density times speed squared. b. half the density times the indicated airspeed squared. c. half the true airspeed times the density squared. d. half the density times the true airspeed squared. 12. A tube facing into an airflow will experience a pressure in the tube equal to: a. static pressure. b. dynamic pressure. c. static pressure plus dynamic pressure. d. the difference between total pressure and static pressure. 13. A static pressure vent must be positioned: a. on a part of the aircraft structure where the airflow is undisturbed, in a surface at right angles to the airflow direction. b. on a part of the structure where the airflow is undisturbed, in a surface parallel to the airflow direction. c. at the stagnation point. d. at the point on the surface where the airflow reaches the highest speed. 14. The inputs to an Airspeed Indicator are from: a. a static source. b. pitot pressure. c. a pitot and a static source. d. pitot, static and density. 15. The deflection of the pointer of the Airspeed Indicator is proportional to: a. dynamic pressure. b. static pressure. c. the difference between static and dynamic pressure. d. static pressure plus dynamic pressure. 37  2 Questions 16. Calibration of the Airspeed Indicator is based upon the density: a. at the altitude at which the aircraft is flying. 2 b. at sea level ICAO International Standard Atmosphere temperature. c. at sea level. Questions d. at sea level ICAO International Standard Atmosphere +15°C temperature. 17. When considering the relationship between different types of airspeed: 1 - True Airspeed (TAS) is read directly from the Airspeed Indicator. 2 - Equivalent Airspeed is Indicated Airspeed corrected for position error. 3 - Indicated Airspeed is not a speed at all, it is a pressure. 4 - True Airspeed is the speed of the aircraft through the air. Which of the above statements are true? a. 1 only. b. 2 and 3. c. 3 and 4. d. 1 and 4. 18. When considering the relationship between different types of Airspeed: 1 - Calibrated Airspeed is Indicated Airspeed corrected for position error. 2 - Equivalent Airspeed is Indicated Airspeed corrected for position error & compressibility. 3 - Position error, which causes false Indicated Airspeed readings, is due to variations in the pressures sensed at the pitot and static ports. 4 - The Airspeed Indicator is calibrated to read True Airspeed when the ambient density is that of the ICAO International Standard Atmosphere at sea level. The combination of correct statements is: a. none of the statements are correct. b. 1, 2 and 4. c. 2 and 3. d. 1, 2, 3 and 4. 19. The speed of sound: a. is dependent upon the True Airspeed and the Mach number of the aircraft. b. is inversely proportional to the absolute temperature. c. is proportional to the square root of the absolute temperature of the air. d. is directly proportional to the True Airspeed of the aircraft. 20. Mach number is: a. the aircraft True Airspeed divided by the local speed of sound. b. the speed of sound in the ambient conditions in which the aircraft is flying. c. the True Airspeed of the aircraft at which the relative airflow somewhere on the aircraft first reaches the local speed of sound. d. the Indicated Airspeed divided by the local speed of sound sea level. 38  Questions 2 21. An aircraft’s critical Mach number is: a. the speed of the airflow when the aircraft first becomes supersonic. 2 b. the speed of the aircraft when the airflow somewhere reaches the speed of sound. Questions c. the Indicated Airspeed when the aircraft first becomes supersonic. d. the aircraft’s Mach number when airflow over it first reaches the local speed of sound. 39  2 Answers Answers 2 1 2 3 4 5 6 7 8 9 10 11 12 d b a b a a d d c b d c Answers 13 14 15 16 17 18 19 20 21 b c a b c d c a d 40  Chapter 3 Basic Aerodynamic Theory The Principle of Continuity....................................... 43 Bernoulli’s Theorem.......................................... 44 Streamlines and the Streamtube................................... 45 Summary................................................ 46 Questions................................................ 47 Answers................................................. 50 41  3 Basic Aerodynamic Theory 3 Basic Aerodynamic Theory 42  Basic Aerodynamic Theory 3 The Principle of Continuity One of the fundamental laws of the universe is ENERGY and MASS can neither be created nor destroyed, only changed from one form to another. To demonstrate the effect this basic Principle of Continuity has on aerodynamic theory, it is instructive to consider a streamline 3 flow of air through a tube which has a reduced cross-sectional area in the middle. Basic Aerodynamic Theory The air mass flow, or mass per unit time, through the tube will be the product of the cross- sectional area (A), the airflow velocity (V) and the air density (ρ). Mass flow will remain a constant value at all points along the tube. The Equation of Continuity is: A × V × ρ = Constant Because air is a compressible fluid, any pressure change in the flow will affect the air density. However, at low subsonic speeds (< M 0.4) density changes will be insignificant and can be disregarded. Th