AC Chemistry PDF

Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic Col...

Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. CHEMISTRY POINTERS BASIC CONCEPTS AND LAWS Chemistry Chemistry is the physical science that deals with the composition, structure, and properties of substances and also the transformations that these substances undergo. Because the study of chemistry encompasses the entire material universe, it is central to the understanding of other sciences. Several branches of Chemistry are the following: a. Organic chemistry – mostly concerned with the study of chemicals containing the element carbon b. Inorganic chemistry – the study of all elements of compounds other than organic compounds c. Analytical Chemistry – the study of qualitative and quantitative analysis of elements and compounds. d. Physical Chemistry – the study of reaction rates, mechanisms, bonding and structure Matter Matter in science, is a general term applied to anything that has the property of occupying space and the attributes of gravity and inertia. STATES OF MATTER Plasma is the collection of charged gaseous particles containing nearly equal numbers of negative and positive ions, is sometimes called the fourth state of matter. Solid is characterized by resistance to any change in shape, caused by a strong attraction between the molecules of which it is composed. Liquids have sufficient molecular attraction to resist forces tending to change their volume. Gas molecules are widely dispersed and move freely, offers no resistance to change of shape and little resistance to change of volume. Science III -1- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. CHANGES IN MATTER Physical Change is characterized by a change in the phase or state of a substance. Some physical properties of the substance are altered, but its chemical composition remains unchanged. Ex. phase change Chemical change is characterized by a change in composition of its molecules changes. The properties of the original substance are lost, and new substances with new properties are produced. An example of a chemical change is the production of rust (iron oxide) when oxygen in the air reacts with iron. Phase Changes Phase Transitions Science III -2- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Matter exists in various forms, or phases. If the temperature and/or pressure of a sample of matter is adjusted, the matter may undergo a phase transition. During a phase transition, matter shifts between its three states: solid, liquid, and gas. Elements and Compounds An Element is a substance that cannot be broken down into simpler substances by ordinary means. Ninety elements are known to occur in nature, and 22 more have been made artificially. Out of this limited number of elements, all the millions of known substances are made. Compounds are substance in which two or more elements joined by chemical bonds. A compound can be created or broken down by means of a reaction but not by mechanical or physical techniques. Water Molecule Science III -3- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Water is an example of a compound. A water molecule consists of an oxygen atom and two hydrogen atoms. Salt, water, iron rust, and rubber are examples of compounds Atoms and Molecules An atom is the smallest unit of an element that has the properties of the element; a molecule is the smallest unit of a compound or the form of an element in which atoms bind together that has the properties of the compound or element. SUB-ATOMIC PARTICLES Nucleus - is very small compared with the rest of the atom and contains most of the atomic mass (or weight). The nucleus is about 10-12 cm (3.94 x 10-13 in) in diameter. The size ratio of the atom to the nucleus is 10,000 to 1. Electrons - is about 10-8 cm (3.94 x 10-9 in). It carries a negative electric charge with an assigned value of -1. The atom is determined by the size of this electron cloud. Proton - carries a positive electric charge with an assigned value of +1. The mass of a proton is 1836 times the mass of an electron. Neutron - has nearly the same mass as the proton, but the neutron has no electric charge. Mass Number - The total number of protons and neutrons in a nucleus. Atomic number- equals to the number of proton in an electron Isotopes - atoms of the same element having the same number of protons but different numbers of neutrons. The term isotope (from the Greek word meaning "same place") defines atoms that have the same number of protons but a different number of neutrons. That is, they are atoms of the same element that have different masses. (Ex. 7H1, 7H1, H71, H1) Atomic Weight - the average weight (more correctly, the mass) of an atom of an element, taking into account the masses of all its isotopes and the percentage of their occurrence in nature. Science III -4- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. MODELS OF THE ATOM An atom of an element is denoted by aXb where X corresponds to the nucleus of the atom (name of the atom, e.g.C), is the mass number and b, the atomic number. Ex. 12C6 Element Number of Number of Number of Atomic Mass number Protons electrons neutrons number Carbon 6 6 6 6 12 Science III -5- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: Complete the table below. Element Number of Number of Number of Atomic number Mass number Protons electrons neutrons Na Na+ Cl- ELECTRON CONFIGURATION The electron configuration of an atom is the arrangement of the atom's electrons with respect to its nucleus. An electron may occupy a certain energy level (n). An orbital is generally visualized as a cloud with a specified size and shape determined, in general, by the energy level of the electron. Valence electrons are electrons found in the highest energy level of the electron cloud. Given the electronic configuration, one can determine its position in the periodic table. The energy level corresponds to the period of the periodic table (1-7) while the number of valence electrons corresponds to the group number of that element. Example, the electron configuration of Na is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p , the orbital number is while the valence number is 1. Therefore, Sodium is in group I period. Science III -6- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Chemical Bonds, Formulas, and Equation Elements that do not have a noble-gas configuration (a stable configuration) try to attain such a configuration by entering into chemical reactions. Stable molecules are formed when atoms combine so as to have outer shells holding eight electrons. Science III -7- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Ionic Bonds In the ionic model, electrons are transferred from one atom to another to achieve noble gas configuration. An ionic bond is formed. The atom giving up the electrons become positively charge (cation), while the atom accepting the electrons becomes negatively charged (Anion). Ionic bonds are formed when elements in Group IA to IIA (except hydrogen) combines with elements in group VIA to VIIA of the periodic table. Ionic solids form crystals. Cations and anions in crystals are arranged in a repeated fixed manner (crystal structure). Covalent bonds When sharing of available outer elements of the atoms occur, a covalent bond is formed. There is no electron transfer in covalent bonding. There can be multiple covalent bonds between two atoms. There can be a double bond or a triple bond. Chemical Reactions Science III -8- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. The reaction is the heart of the study of chemistry. All chemical reactions involve the breakage and reformation of chemical bonds of molecules to form different substances. Chemical reactions can be expressed through equations that resemble mathematical equations. The reactants (the substances that are combined to react with one another) appear on the left side of the equation, and the products (substances produced by the reaction) are written on the right side of the equation. The reactants and products are typically connected by an arrow or various types of double arrows. The single arrow shows that a reaction only proceeds in the direction indicated, while the double arrow indicates that a reaction can proceed in either direction (that products are also reacting with each other to reform reactants). Ex. TYPES OF CHEMICAL REACTIONS A. Composition Reaction (synthesis or combination reaction) is a type of chemical reaction where a more complex substance is broken down into two or more simpler substances. General Form: A+ X
AX e.g. 2H2 + O2
2H2O Fe + S
FeS B. Decomposition Reaction is a type of chemical reaction where a more complex substance is broken down into two or more simpler substances. General Form: AX
A + X e.g. CaCO3
CaO + CO2 There are five classes if decomposition, namely: 1. Decomposition of a metallic carbonate 2. Decomposition of a metallic hydroxide 3. Decomposition of a metallic chlorate 4. Decomposition of some acids 5. Decomposition of metallic oxides C. Single Replacement Reaction is a type of chemical reaction in which a less reactive element is displaced from a compound by a more reactive element. General Form: A + BX
AX + B Y + BX
BY + X There are four classes of replacement reactions. They are as given below: 1. Replacement of a less active metal from a compound by a more active metal. 2. Replacement of a less active nonmetal from a compound by more active non-metal. 3. Replacement of hydrogen from water by metals Science III -9- Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. 4. Replacement of hydrogen from an acid by a more reactive metal. D. Double Displacement reaction is a type of reaction wherein cations of two compounds switch anions to form new products. General Form : AX + BY
AY + BX e.g. NaOH + HCl
NaCl + H2O EXOTHERMIC AND ENDOTHERMIC REACTIONS A chemical reaction either absorbs or releases energy. The energy released is in the form of heat energy. An exothermic reaction is defined as a chemical reaction that releases energy. Most often, the energy released is in the form of heat or light. When a bomb explodes, a tremendous amount of light and heat energy is released. This is an example of an exothermic reaction. On the other hand, there are chemical reactions that absorb energy as they take place. This reaction is endothermic. Photosynthesis requires light from the sun to proceed the reaction. Thus, it is an example of endothermic reaction. FACTORS AFFECTING THE RATE OF A CHEMICAL REACTION The rate of chemical reaction is affectedly several factors: a. the nature of the reactants – the more reactive the reactant is to another reactant, the faster the reaction will proceed b. temperature-generally, the higher the temperature, the faster the reaction will take place c. concentration of the reactants-the higher the concentration to react with another reactant, the faster the reaction will take place d. surface area- the smaller the surface area, the faster the reaction e. effect of catalyst-with the presence of a catalyst, the reaction will become faster Factor Example Nature of reactants Gold + water =no reaction Sodium +water = fast Temperature Evaporation is faster when it is hot Concentration of reactants Wood+dilute acid= slow Wood +concentrated acid=fast Surface area Crushed eggshells will dissolve fast in acid Whole eggshells will dissolve slow in acid Science III - 10 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Presence of catalyst Decomposition of formic acid = slow Decomposition of formic acid in the presence of sulfuric acid = fast LAWS OF CHEMICAL COMBINATION The laws of chemical combination were formulated in the early part of the 19th century. They are a result of the first use of quantitative measurement in chemistry. In 1799, Joseph Proust proposed the law of definite proportions (also called the law of constant composition). The law states that compounds contain elements in certain fixed proportions and in no other combinations, regardless of the method of preparation. Thus, chalk, or calcium carbonate, CaCOO, is always 40% calcium, 12% carbon, and 48% oxygen, by weight. In 1803, John Dalton articulated the law of multiple proportions. This law states that if two elements combine to form more than one compound, then the ratio of the weights of the second element (which combines with a fixed weight of the first element) will be small whole numbers. For example, carbon and oxygen can form two compounds, carbon monoxide and carbon dioxide. In carbon monoxide 12 g of carbon combine with 16 g of oxygen, and in carbon dioxide, the same weight of carbon combines with 32 g of oxygen. Thus, the oxygen weight ratio that combines with 12 g of carbon is (32/16), or 2. The law of combining weights, also proposed by Dalton, states that in every compound, the proportion by weight of each element in the compound may be expressed by the atomic weight or a multiple of the atomic weight of each element. (This law was discovered before the atomic theory was postulated and was thus worded more generally.) The law of combining weights can be seen to follow directly from the atomic theory. In the case of water, HMO, each molecule of water is composed of two atoms of hydrogen (atomic weight 1) and one atom of oxygen (atomic weight 16). Thus, all molecules of water consist of 2 parts of hydrogen and 16 parts of oxygen by weight. All other compounds can be analyzed similarly. These three laws, proposed from the first use of quantitative experimental techniques, resulted (1803) in Dalton's atomic theory. Balancing Equations With the Laws governing chemical reactions, the numbers of atoms for each element should be equal in the reactant side and the product side. We should therefore balance a chemical reaction. A chemical equation is considered balance if there are exactly the same number of atoms for each element on both sides of the equation. Science III - 11 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Stoichiometry Stoichiometry is the branch of chemistry that deals with quantitative relationships between the reactants and products of a chemical reaction. In the reaction 2H2 + O2
2H2O two moles of hydrogen is needed to react with one mole of oxygen to yield two moles of water. 2H2 + O2
2H2O 2moles 1mole 2moles 2g/mol H2 32g/mol O2 18 g/mol H2O 4grams 32 grams 36 grams This means that 4 grams of hydrogen is needed to react completely with 32 grams of oxygen to produce 36 grams of water. APPLICATION a. Mole to Mole Combustion of butane produces carbon dioxide and water. How many moles of water will be produced if 5 moles of butane is used in the reaction? Step1: Write the balanced chemical equation. 2CH4H10 + 13O2
8 CO2 + 10H20 Step2: The balanced chemical reaction shows that for every 2 moles of butane, 10 moles of water will be produced. Using the relationship, multiply the number of moles of butane to the stoichiometric ratio. 5moles CH4H10 x 10 moles H20 = 25moles H20 2 moles CH4H10 Science III - 12 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. b. Mole to Mass If 0.25 moles of sodium carbonate is heated, what mass of sodium oxide will be produced? Step 1: Write the balanced equation. Na2CO3
Na2O + CO2 Step2: Determine the molecular weight of Na2O and analyze the problem. Na2O = 22.99(2) + 16 = 61.98 g/mol Step 3: The balanced chemical equation shows that for every 1mole of sodium carbonate, 1mole of sodium oxide will be produced. Using this relationship, multiply 0.25 moles of sodium carbonate to the stoichiometric ratio. 0.25 moles Na2CO3 x 1mole Na2O = 0.25 moles Na2O 1mol Na2CO3 Step 4: Convert the answer in step 3 into required unit (mass) using the relationship m=n 0.25 moles Na2O x 61.98g/mol Na2O = 15.50 g Na2O c. Mass to Mass How many grams of oxygen will be produced if 85.16 g of sodium chlorate is heated? Step1: Balance the chemical equation. 2 NaClO3
2 NaCl + 3O2 Step2: Determine the molecular weights of the compounds involved and analyze the problem. 2 NaClO3
2 NaCl + 3O2 MW = 22.00+ 35.45+ 16.00 (3) =2(16) = 106.44g/mol =32 g/mole Step 3: Convert given mass of sodium chlorate to moles. Moles of sodium chlorate = 85.16g sodium chlorate = 10g/mol sodium chlorate Science III - 13 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. = 0.8001 mol sodium chlorate Step4: From the balanced chemical equation, 2moles of sodium chlorate heated will produce3molesof oxygen. Using this relationship, multiply the result in Step3 with this ratio. 0.8001molsodium chlorate x 3molsoxygen 2molssodiumchlorate = 1.200 mol oxygen Step 5: Convert moles of oxygen produced to mass. 1.200molsoxygen x 32.00g oxygen = 38.40 g oxygen 1mol oxygen Science III - 14 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. d. Mass to mole Lighting a candle produces 0.13 g of water. What is the mass of butane used? (Butane is the fuel used in most lighters) Step 1: Balance the chemical reaction. Remember that the complete combustion reaction of a hydrocarbon will yield carbon dioxide and water. 2CH4H10 + 13O2
8 CO2 + 10H20 Step2: Analyze the problem. 2CH4H10 + 13O2
8 CO2 + 10H20 Given: 0.012g MW = 1.008(2)+16 =18.02g/mol Step 3: Convert given mass of water to moles Moles water = 0.012g water 18.02g/mol water = 0.000666 mol water Step4: From the balanced chemical equation, we have the following relationships: 2molesofbutane will produce 10 moles of water 2moles of butane burned will produce 8 moles of carbon dioxide 0.000666 mol of water x 2molsof butane 10mols of water = 0.0001333 mol of butane Step 5: Convert mole to mass: 0.0001333molbutane x 58.12 g butane 1mole butane = 0.0077 g butane Science III - 15 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Gases Kinetic molecular Theory Postulate 1: gases are made up of very tiny particles, called molecules. There are big empty spaces between the molecules of gases. The sizes of the molecules are very small compared to the distance between them, thus making them compressible. This also explains why gases have low density. Postulate 2: gaseous molecules are in constant random motion. These particles are moving in straight lines at different speeds and direction. Since they are moving constantly, gases can easily occupy a large container. Thus, gases have no definite shape and volume and exhibits expandability. The random motion of the gaseous molecules explains the diffusibility and effusibility of gases. Diffusibility is the ability of a gas to scatter in space, while effusibility is the ability of a gas to escape through a small opening. Postulate 3: The intermolecular forces of attraction between gaseous particles (molecules or atoms) are very weak. This attractive force between molecules was discovered by Johannes Diderik van der Waals and is called the Van der Waals force. Postulate 4: The collision of gas particles with each other or with the walls of its container is perfectly elastic. Thus, no energy is lost upon collision. This means that the gas particles continue to move even if they collide with each other or with the container walls. The collision of molecules with the walls exerts pressure on the container. Postulate 5: The average kinetic energy of the gas particles is directly proportional to the absolute temperature. As temperature increases, the average kinetic energy of the gas particles also increases and vice versa. The Gas Laws The laws governing the behavior of gases are termed collectively as the gas laws. Science III - 16 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. 1. BOYLE’S LAW Robert Boyle was the first scientist to measure the relationship between pressure and volume of gases (with temperature held constant).Boyle’s Law states that the volume of a certain amount of dry gas held at constant temperature is inversely proportional to the pressure exerted by the gas. This statement is expressed mathematically as APPLICATION: What is the volume of a gas at 750 mmHg if it exerted pressure of 650mmHg at 700 mL? Assumethat temperature is held constant.) Given: V1 = ? V2= 700 mL P1 = 750 mmHg P2= 650mmHg P1V1 = P2V2 V1 = P2V2 P1 = (650 m Hg) (700 mL) = 685.7mL 750 mm Hg 2. CHARLE’S LAW Alexandre Charles performed experiments on the relationship between the volume and temperature of gases. Charles’ Law states that the volume of a certain amount of dry gas at constant pressure is directly proportional to its absolute temperature. This statement is represented as V1/ T1 = V2/ T2 Science III - 17 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: The volume of a gas at 27 C is 400 mL. What will be the volume of that gas at 47 C, if the pressure is held constant? Given: V1 = 400 mL V2 = ? T1 = 27 C + 273 T2 = 47 C + 273 = 300 K = 320 (Note that temperature in Celsius should be converted into Kelvin scale) Solution: V1/ T1 = V2/ T2 V2 = V1T2 T1 = (380mL) (320K) 300 K = 405.33 mL 3. COMBINED GAS LAWS Given a fixed amount of gas at two different conditions of pressure, temperature and volume, we derive the following relationship: P1V1 = P2V2 T1 T2 Science III - 18 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: The volume of a Gas at 37 C and 700 mm Hg is 500mL. What is the volume of the gas at 15 C and 600 mm Hg? Given: V1 = 500mL V2 = ? T1 = 37 C+ 273 T2 = 17 C+273 = 310K = 290 K P1 = 700 mmHg P2 = 600 mmHg Solution: P1V1 = P2V2 T1 T2 V2 = P1V1 V2 T1 P2 = (700mmHg) (500mL) (290 K) (310 K) (600 mm Hg) = 545.7 mL 4. AVOGADRO’S LAW Amadeo Avogadro interpreted Gay-Lussac’s findings on gas reactions at constant temperature and pressure. Avogadro’s Law states that at a given temperature and pressure, the same volume of any two gases contain equal number of molecules. The molar volume of any gas at STP ( Standard temperature and Pressure) is 22.4 L. 5. IDEAL GAS LAW Boyle’s Law, Charle’s Law and Avogadro’s Law can be combined such that the variables V,P,T and n are all equated to a single constant, R (the universal gas constant or ideal gas constant). The combined equation becomes: PV = 1 nRT or PV = nRT where R = 0.0821 atm-L/molK Science III - 19 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: A sample of oxygen occupies 8.0 L of space at STP. How many moles of oxygen are present in the sample? Given: At STP, P= 1 atm T= 273 K V= 8.0 L n= ? Solution: Use the formula, PV = nRT n = PV / RT = (1atm)(8.0L) (273 K) (0.0821 at-L/mol K) = 0.36 mol oxygen 6. GRAHAM’S LAW Thomas Graham discovered the relationship between the ability of a gas to pass through a small opening and its molecular weight. He found out that the rate of effusion of any gas is inversely proportional to the square root of its molecular weight. Thus, the heavier the gas molecule is, the slower the effusion of that gas. 7. DALTON’S LAW OF PARTIAL PRESSURE According to John Dalton, the pressure exerted by a mixture of non-reacting gases is the sum of the partial pressures that each gas in the mixture exerts individually. Mathemetically, this law is expressed as: Pt = P1 + P2+ P3…. + Pn Science III - 20 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. SOLUTION A solution is a homogeneous mixture of two or more substances whose components are uniformly distributed all throughout. Solutions have two components, a solute, the substance to be dissolved and the solvent, the dissolving medium. Usually, the solvent is greater in quantity than the solute. In a solution containing sugar and water, the solute is the sugar and the solvent is the water. Properties of Solutions Concentration is the measure of the quantity of a solute in a given amount of solution or solvent. It can be expressed qualitatively and quantitatively. A concentrated solution contains a large amount of solute per volume of solvent. A dilute solution contains a small amount of solute per volume of solvent. Saturated solution contains as much solute as it can dissolve. In a saturated solution, dissolving and crystallizing occur at equal rates. An equilibrium exists between solute and solvent. When a solution can still hold more solute, the solution is still unsaturated. When a solution has more solute than it should normally hold, it becomes supersaturated. Excess solute will crystallize, making it an unstable solution. For liquid in liquid solutions, solubility is described in terms of miscibility. When a solute and a solvent readily dissolve in any amount in each other, they are referred to as miscible. When the components of a solution only have limited solubility, then it is only partially miscible. Substances which are immiscible do not dissolve in each other. They form two phases or layers. Solubility Solubility is the measure of the amount of solute that can be dissolved in a given quantity of solvent at a specific temperature. TEMPERATURE The solubility of gases in water is inversely proportional to temperature. This means that an increase in temperature will decrease the solubility of gases in water. PRESSURE Henry’s Law states that the solubility of a gas in a liquid is directly proportional to the pressure exerted by the gas on the surface of the liquid. THE NATURE OF THE SOLUTES Science III - 21 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. “Like dissolves like. Polar solvents will dissolve polar solutes and non polar solutes dissolve in non- polar solvents. Water is the universal solvent because of its ability to dissolve a great number of polar and ionic compounds. FACTORS THAT AFFECT THE RATE OF DISSOLUTION 1. Size of particles The smaller the solute particles, the faster it dissolves. Smaller particles have greater surface areas exposed to the solvent. 2. Rate of stirring The rate of dissolution is increased by stirring constantly. Stirring allows faster contact between the solute and the solvent particles. Stirring also increases the kinetic energy of the system. 3. Heating Heating also increases the kinetic energy of the solute and the solvent. This means that dissolution increases as the temperature increases. MODES OF EXPRESSING CONCENTRATION Concentration is the ratio of a specified amount of solute to a specified volume of solvent or solution. Concentration = amount of solute Volume of solute /solvent The following are various means of expressing concentration. 1. Percent Concentration is the percent of the solute in the solution. a. Percent by mass (Pm) is the mass of solute divided by the total mass of solution multiplied by 100. The mass of solution is equal to the mass of the solute plus the mass of the solvent. Science III - 22 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION a.1. A chemist needs to prepare ceramic tile cleanser which contains 300 grams of hydrogen chloride and 600 grams of water. What is the percent by mass of the hydrogen chloride in the cleanser? Given: Mass of solute = 300 g Mass of solvent = 600 g Mass of solution = 300+600 = 900 g Pm = ? Solution: Pm = mass of solute x100% Mass of solution = 300 x 100% 900 = 33% a.2. How much water must be added to 50 grams of salt o prepare 50% solution? Given: Mass of solute = 50 grams Pm = 50% 50% = 50 grams x 100% 50 + X 0.50 = 50g 50+x 0.50 (50+ x) = 50 25 +0.50 x = 50 0.50x = 50-25 x = 25 / 0.50 x = 50 g water b. Percent by volume To determine percent by volume, simply divide the volume of solute by the total volume of the solution and multiply the result by 100%. The solute and the solution volumes have to be expressed in the same units. Pv = Vsolute / Vsolution x 100% Science III - 23 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: A solution is prepared with 15 cc and 35 cc hydrocarbon to make to make a solution. Determine the concentration of benzene in percent by volume. Given: Volume of solute = 15 cc Volume of solvent = 35 cc Volume of solution = 15 cc + 35 cc = 50 cc solution Pv = ? Solution: Pv = 15 cc / 50 ccx 100% = 30% c. Percent by Mass – Volume is used when dealing with a solid solute and a liquid solvent. Percentage by mass-volume is obtained by dividing the mass of solute, in grams by the total volume of solution in mL and the result is multiplied by 100%. Percent by mass-volume = mass of solute (g) x 100% Volume of solution (mL) APPLICATION A 0.84% (m/v) sodium chloride solution has to be administered a patient intravenously. Determine the volume of the solution if 208 grams of sodium chloride is used. Given: Percent by mass-volume = 0.84% Mass of solute = 2.8 grams Volume of solution = ? Solution: Pmv = 2.8 g / x * 100% 0.84% x = 2.8g * 100% x = 280 g / 0.84 x = 322 mL Science III - 24 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. 2. Mole Fraction is the ratio of the number of moles of solute in a given mole of solution. Mole fraction = mole of solute Mole solution APPLICATION: What is the mole fraction of 35 g of calcium hydroxide dissolved in 42 grams of water? Analysis of the Problem: Mass of solute = 35 g Mass of solvent = 42 g Mole fraction = ? Solution: Determine the moles of solute and solvent from their molecular weight. Ca(OH)2 = 40 + 2(16) + 1(2) = 74 g/mol H2O = 1(2) + 16 = 18 g/mol mole Ca(OH)2 = 35 g / (74 g/mol) = 0.473 moles moles of H2O = 42 g/ (18 g/mol) = 2.333 mole moles of solution = 0.473 + 2.333 = 2.803 moles mole fraction of Ca(OH) 2 = 0.473 moles 2.806 moles = 0.17 3. Molarity Molarity expresses the amount of solute in moles per liter of solution. M = moles of solute / volume soln. liter Science III - 25 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION :Calculate the molarity if 45 g of sodium hydroxide is present in 200 cc of solution Given: Mass of solute = 45 grams Volume of solution = 200 cc or 0.200L M= ? Solution: Determine the molecular weight of sodium hydroxide: NaOH = 23 + 16 + 1 = 40 g/mol Convert the given mass to moles: 45 g NaOH ? (40 g/mol) = 1.125 moles NaOH M= 1.125 moles / (0.200 L) = 5.6 molar 4. Molality Molality is based on a fixed volume of a solution while molarity is based on a fixed mass of solvent. Molality = moles of solute / mass solvent (kg) Science III - 26 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. APPLICATION: Calculate the molality of a solution that contains 35 grams ammonia in 500 grams of water. Given: Mass of solute = 35 g Mass of solvent = 500 grams or 0.510 kg Molality =? Solution: Determine the molecular weight of ammonia and change the mass of ammonia into moles. NH3 = 14 + 1(3) = 17 g/mole Moles of ammonia = 35 grams / 17 g/mole = 2.06 moles Molality = 2.06 moles / 0.5 kg = 4.1 molal 5. Normality Normality is the number of equivalents of solute in a liter of solution Normality (N) = number of equivalence / liter of solution An equivalent is defined as the number of moles of an acid or base multiplied by the number of replaceable hydrogen or hydroxide ions it has. Equivalent weight is the molecular weight of an acid multiplied by the number of equivalent of hydrogen or hydroxide ion it has per molecule. APPLICATION Determine the normality of 1.5L solution that contains 18.3 g of sulfuric acid Given: Mass of solute = 18.3 grams sulfuric Volume of solution = 1.5 liters N=? Solution: Determine the equivalent weight of sulfuric acid. Since there are two replaceable hydrogen ions in H2SO4, simply divide the molecular weight of sulfuric acid (98.0734 g/mol) by two. Convert the mass of sulfuric acid to equivalence. Then calculate normality. 18.3 g H2SO4 x (1 equivalent/ 49.0367) = 0.373 Science III - 27 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. N= 0.373 equivalent / 1.5 L = 0.25 normal Acids and Bases Definition of Acids and Bases Acid Base Arrhenius A substance that yields H+ ions A substance that yields OH- ions in aqueous solution in aqueous solution Bronsted Lowry Proton donor Proton acceptor Lewis Electron pair acceptor Electron pair donor Science III - 28 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Properties of Acids and Bases Acid Base Sour taste Bitter taste Irritating smell (for most acids) Slippery or soapy touch Turns blue litmus paper to red Turns red litmus paper to blue pH 7 pH >7 , pH < 7 Neutralizes a base Neutralizes an acid Good conductor of electricity Good conductor of electricity Classification of Acids and bases Acids can be classified according to the number of hydrogen and hydroxyl group. A monoprotic contains 1 hydrogen, diprotic, 2 hydrogen and so on. A monobasic contains only one hydroxide group, dibasic, 2 and so on. Water is amphoteric because it can act as an acid or base. pH and pOH The pH of the solution is equal to the negative logarithm of its hydrogen ion concentration ([h+]. pH= -log [H+]. pOH = -log [OH] pH + pOH = 14 * water has a pH of 7. It is neutral. Science III - 29 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. Organic Chemistry Hydrocarbons- contain only hydrogen and carbon in their molecules. It can be classified as alkanes, alkenes, and alkynes. ALKANES- hydrocarbons that contain only single bonds in their molecules. ALKENES- there is at least one carbon-to carbon double bond. ALKYNES- hydrocarbon where there is at least one carbon-carbon triple bond. Aromatics Aromatic compounds are organic compounds having cyclical hydrocarbon rings where all the atoms are sp2 hybridized. Substituted hydrocarbons a. Alcohol – with OH functional group (R – OH) b. Ethers- hydrocarbon chains attached to an oxygen atom (R-O-O-R) c. aldehydes and ketones – have carbonyl group (C=O) d. Halogenated hydrocarbons – hydrocarbons where one or more hydrogen is replaced by a halogen. e. Amines- if you replace a hydrogen atom from an ammonia molecule with a hydrocarbon f. Amides – carboxyl group (C=O) comes between the hydrocarbon chain and the nitrogen of an amine Biological Chemistry Biological chemistry deals with the chemical substances that make up living things such as their tissues, body fluids, and others. Biological Substances 1. Carbohydrates – include the different types of sugar, starch (like those from rice, bread, sweet potato) and the like. They are primary sources of energy in plant bodies. They are classified according to the number of simple sugar units or “saccharides” into the following: Science III - 30 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!  Academic- Academic-Clinic.com The achiever’s guide to academic life and beyond… Website: http://academic-clinic.com Facebook: http://www.facebook.com/academic.clinic Twitter: http://twitter.com/acadclinic College entrance exam and science high school entrance test tips. Conquer UPCAT, ACET, USTET, DLSUCET, PSHS-NCE, and other entrance tests. a. Monosaccharides – made of one simple sugar unit (ex. Fructose, ribose, glucose) b. Disaccharides – made up of two simple sugar units (ex. Maltose, sucrose) c. Polysaccharides- made of more than two simple sugar units. (ex. Glycogen, cellulose) 2. Proteins – Substances classified as proteins vary in shapes, sizes and functions, but there are similarities in their chemical structures. They are all poly peptides (polymers of amino acids) Amino acids are chemically carboxylic acids with an amino group. There are about 20 common amino acids found in the body, each has a different side chain. The most common secondary structures are the alpha-helix, the beta-pleated sheet and the triple helix. 3. Nucleic Acids – a polymeric chain of nucleotides (polynucleotides). Each nucleotide component is made up of a phosphate group, a sugar, and a nitrogen base. The base can be a purine (adenine or guanine) or a pyrimidine (cytosine, thymine or uracil) derivative. The sugar found is either ribose or deoxyribose. It s the sugar that determines whether the nucleic acid you have is a DNA or RNA. If the sugar used is ribose, you get an RNA. If the sugar used is deoxyribose, you get a DNA. a. Deoxyribonucleic acid (DNA) DNA structure is a double – helix. This is responsible for the replication of DNA. The complementary base pairs in the DNA structure are : Adenine and Thymine , Guanine and Cytosine. b. Ribonucleic Acid (RNA) In RNA, uracil is used in place of thymine. Messenger RNA (mRNA) copies genetic information from DNA in the cell nuclei to the ribosomes (where proteins are made.) Transfer RNA (tRNA) carries amino acids to the site of protein synthesis Ribosomal RNA (rRNA) provides the site for protein synthesis. 4. Lipids – fatty acids and their esters. Fatty acids are chemically carboxylic acids. If you eat too much, the food you overeat will be stored as lipids in adipose tissues. Two types of lipids are: the simple lipids and compound lipids. Science III - 31 - Feel free to pass this on to your friends, but please don’t post it online. Discuss UPCAT and other college entrance exam questions and answers at Academic-Clinic’s Facebook Page. We encourage you to answer the questions we post there and actively participate in the discussions on our wall. For UPCAT, ACET, DLSUCET and USTET tips, tricks, news and other college entrance exam information, visit the Academic-Clinic website. Tell your friends and classmates to come find and join us. The more, the merrier. Good luck!