Transcribe-notes-CHEMICAL-EXAMINATION-OF-URINE-V1.pdf

Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS CHEMICAL EXAMINATION OF URINE A. Reagent strips B. pH C. Protein...

Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS CHEMICAL EXAMINATION OF URINE A. Reagent strips B. pH C. Protein D. Glucose E. Ketones F. Blood G. Bilirubin H. Urobilinogen I. Nitrite J. Leukocyte esterase K. Specific gravity The chemical examination of urine using reagent strips has revolutionized urine testing by providing a simple and rapid method for medically significant analysis. Reagent strips are used to measure several components in urine, including: pH Protein Glucose Ketones Blood Bilirubin Urobilinogen Nitrite Leukocytes Specific gravity Two major types of reagent strips are Multistix (Siemens) and Chemstrip (Roche), which are widely used and vary based on laboratory preference. These strips contain chemical-impregnated absorbent pads that undergo color changes when reacting with urine. The color is compared to a chart provided by the manufacturer, allowing for semiquantitative readings (trace, 1+, 2+, 3+, or 4+) and estimates of the concentration of substances in mg/dL. Automated readers can also provide readings in Système International units. Key aspects: Rapid, easy-to-use method for routine chemical analysis. Available in different testing areas depending on laboratory needs. Color comparisons are used to interpret results semiquantitatively.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Reagent strips used in urinalysis consist of chemical-impregnated absorbent pads attached to a plastic strip, designed to detect various substances in urine through color reactions. Different types of reagent strips are available based on the number of parameters they can test: 1. 4-Parameter Urinalysis Reagent Strip: o Typically tests for: ▪ pH ▪ Protein ▪ Glucose ▪ Ketones 2. 10-Parameter Urinalysis Reagent Strip: o Commonly tests for: ▪ pH ▪ Protein ▪ Glucose ▪ Ketones ▪ Blood ▪ Bilirubin ▪ Urobilinogen ▪ Nitrite ▪ Leukocytes ▪ Specific gravity 3. 11-Parameter Urinalysis Reagent Strip: o Tests for the 10 parameters listed above, plus: ▪ Ascorbic acid (Vitamin C) 4. 14-Parameter Urinalysis Reagent Strip: o Includes the same as the 11-parameter strip, with additional testing for: ▪ Microalbumin ▪ Creatinine ▪ Calcium The Reagent Strip Technique involves a careful process to ensure accurate urinalysis results. The procedure includes: 1. Dipping the Strip: Briefly and completely dip the reagent strip into a well-mixed urine specimen. 2. Removing Excess Urine: Run the strip's edge on the container to remove excess urine, then blot the strip horizontally on an absorbent material. 3. Waiting for Reactions: Wait for the specific time required for chemical reactions to occur based on the manufacturer’s instructions. 4. Comparing Results: Use a good light source to compare the color changes on the strip to the manufacturer’s color chart.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Errors Caused by Improper Technique: 1. Unmixed Specimen: Formed elements (like red and white blood cells) may sink to the bottom, leading to inaccurate results. 2. Extended Dipping: Leaving the strip in urine for too long can cause reagents to leach from the pads. 3. Excess Urine on the Strip: This can lead to chemical run-over between adjacent pads, distorting the color results. Blotting the strip edge and holding it horizontally prevents this. 4. Incorrect Timing: Reaction times vary (e.g., pH reacts immediately, leukocyte esterase in 120 seconds). Follow the manufacturer’s timing guidelines for best results. 5. Poor Lighting: A good light source is crucial for accurately interpreting the color reactions. 6. Proximity to Color Chart: The strip should be held close to, but not touching, the color chart during comparison. Automated reagent strip readers standardize color interpretation and timing, eliminating the need for manual reading and potential issues like poor lighting or inconsistencies among lab personnel. 7. Non-Interchangeability: Reagent strips and color charts from different manufacturers cannot be interchanged, as the chemical reactions and color scales are specific to each brand. 8. Room Temperature Specimens: Urine specimens stored in the refrigerator must be brought to room temperature before testing. This is essential because the enzymatic reactions on the reagent strips are temperature-sensitive, and cold specimens may lead to inaccurate results. Handling and Storing Reagent Strips requires proper care to prevent deterioration from moisture, chemicals, heat, and light. Key guidelines include: 1. Packaging: Reagent strips are stored in opaque containers with a desiccant to protect them from light and moisture. 2. Storage: Strips should be stored at room temperature, below 30°C, and never refrigerated. Bottles should be tightly resealed immediately after removing a strip. 3. Avoid Fumes: Do not open bottles in areas with volatile fumes to avoid contamination. 4. Expiration Date: Each bottle has an expiration date, and strips should not be used past this date. 5. Handling: Avoid touching the chemical pads when removing strips from the container. 6. Visual Inspection: Inspect strips for signs of deterioration before each use, even if they are within the expiration date. Quality Control of Reagent Strips To ensure accurate results, reagent strips must undergo regular quality control testing using both positive and negative controls. The key points include:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS 1. Daily Testing: Strips should be checked at least once every 24 hours, typically at the start of each shift. 2. Situational Testing: Additional testing is required when: o A new bottle of reagent strips is opened. o Questionable results are obtained. o There is concern about strip integrity. 3. Control Results: All quality control results should be recorded according to lab protocols. Positive control readings should match the published values, while all negative control readings must be negative. o Distilled water is not recommended as a negative control due to its low ionic concentration, which differs from urine. 4. Error Detection: Even if the strips pass quality control, errors may still occur due to: o Interfering substances in the urine. o Technical issues (e.g., careless handling, color blindness). o Example: Phenazopyridine in urine may mask color reactions, leading to false results. Confirmatory Testing Confirmatory tests are secondary tests using different reagents or methods to verify the same substances detected by reagent strips, often with greater sensitivity or specificity. Examples: 1. Non-reagent Testing: Non-reagent strip methods (using tablets or liquid chemicals) may be used when: o Results are questionable. o Highly pigmented specimens interfere with strip readings. 2. Decreased Routine Use: Routine confirmatory testing has declined due to increased sensitivity and specificity of reagent strips and the use of automated strip readers. 3. Control Verification: Confirmatory test procedures also require positive and negative controls to ensure chemical reliability. 4. Institutional Protocol: The use of confirmatory tests depends on institutional protocols, which dictate when they should be performed. Care of Reagent Strips 1. Store with a desiccant in an opaque, tightly closed container. 2. Keep below 30°C; avoid freezing. 3. Prevent exposure to volatile fumes. 4. Do not use past the expiration date. 5. Discard strips if the chemical pads become discolored. 6. Remove strips from the container only just before use.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Technique 1. Mix the specimen well before testing. 2. Allow refrigerated specimens to reach room temperature. 3. Briefly dip the strip fully into the specimen. 4. Remove excess urine by touching the strip to the container's rim and blotting the edge. 5. Compare the strip's reaction colors to the manufacturer’s chart in good lighting, at the specified time. 6. Perform backup tests if necessary. 7. Be cautious of any interfering substances in the urine. 8. Understand the test principles and read package inserts for details. 9. Relate chemical results to other physical and microscopic urinalysis findings. Quality Control 1. Test open reagent strip bottles with known positive and negative controls at least once every 24 hours. 2. Investigate and resolve any control results that fall out of the acceptable range. 3. Test reagents used in backup tests with positive and negative controls. 4. Perform control testing on new and newly opened reagent strip bottles. 5. Record all control results and reagent lot numbers. 1. pH of Urine The kidneys and lungs regulate the body’s acid-base balance. The kidneys achieve this by secreting hydrogen ions (in forms like ammonium, hydrogen phosphate, and weak organic acids) and reabsorbing bicarbonate in the convoluted tubules. Normal pH Range: Typically, urine pH ranges from 4.5 to 8.0, with the first-morning specimen slightly acidic (pH 5.0-6.0). The pH may become more alkaline after meals (alkaline tide). This acidity is due to overnight metabolic processes and lower fluid intake, which concentrates the urine. Post-Meal Alkaline Tide: Urine pH can become more alkaline after eating, especially meals high in alkaline substances. This change is temporary and reflects the body's response to neutralize acids produced during digestion. No Fixed Normal Value: Urine pH should be considered alongside factors like blood acid- base content, renal function, urinary tract infections (UTI), diet, and sample age. Influencing Factors: Blood Acid-Base Content: Urine pH is influenced by the body’s overall acid-base balance, which the kidneys help regulate by adjusting the number of acids and bases excreted.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Renal Function: Proper kidney function is crucial for maintaining urine pH. The kidneys adjust the excretion of hydrogen ions and bicarbonate to regulate pH. Urinary Tract Infections (UTI): Certain bacteria produce enzymes that can alter urine pH, typically increasing it and leading to a more alkaline urine. Diet: High-protein diets result in acidic urine due to the metabolism of proteins, which produce acidic byproducts. Conversely, diets rich in fruits and vegetables often result in more alkaline urine because of the production of bicarbonates. Sample Age: Over time, urine becomes more alkaline due to bacterial growth and urea breakdown. Fresh specimens are preferred for accurate pH measurement. Clinical Significance of Urine pH Acid-Base Disorders: Urine pH helps identify systemic metabolic or respiratory acid-base disorders. Acidic urine in respiratory/metabolic acidosis is normal, but deviations from this can signal renal issues. Your body constantly works to keep the right balance between acids and bases. The kidneys play a big role here by adjusting how much acid or base is in your urine. If your urine is too acidic or too alkaline, it might signal an issue with how your kidneys are handling this balance. For example, if you have respiratory or metabolic acidosis, your urine should be acidic. If it’s not, it might hint at a kidney problem. Metabolic Conditions: Acidosis: Conditions like diabetic ketoacidosis or lactic acidosis cause the body to excrete more hydrogen ions, leading to more acidic urine. Alkalosis: Metabolic or respiratory alkalosis, where there’s an excess of base in the body, can result in more alkaline urine. Respiratory Conditions: Respiratory Acidosis: When the lungs cannot remove enough carbon dioxide, leading to increased acidity in the blood and urine. Respiratory Alkalosis: Hyperventilation causes a loss of carbon dioxide, leading to a more alkaline urine pH. Prevention of Renal Calculi: Kidney stones can form when substances like calcium oxalate in your urine crystallize and clump together. Urinary crystals and calculi (like calcium oxalate) form based on urine pH. Alkaline pH discourages calcium oxalate formation, so pH control can help manage kidney stones. The pH of your urine influences these crystal formations. Calcium oxalate crystals form more easily in acidic urine, so keeping your urine more alkaline can help prevent these stones from forming.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Urinary Tract Infections: Certain bacteria that cause UTIs prefer alkaline urine to grow and multiply. Acidic urine slows the multiplication of urea-splitting bacteria, which are responsible for infections, and highly alkaline urine in poorly preserved samples. High- protein diets lead to acidic urine, while vegetarians usually produce more alkaline urine. Acidic urine can slow down the growth of these bacteria, helping to prevent infections. A diet high in protein typically makes your urine more acidic, which can be beneficial. On the other hand, a vegetarian diet makes urine more alkaline, which might increase the risk of infection. Drinking cranberry juice can help acidify urine and is a popular remedy to help prevent UTIs. Urea-Splitting Bacteria: Certain bacteria, such as Proteus species, produce urease, which splits urea into ammonia and carbon dioxide. This process increases the urine pH, making it more alkaline. pH Above 8.5: A pH over 8.5 indicates improper preservation, requiring a fresh specimen. Urine pH should generally stay within a normal range. If it goes above 8.5, it usually means the sample wasn’t preserved properly. High pH in a urine sample often indicates that the sample has been sitting around too long or was not stored correctly. Important Note: If you’re using containers other than the single-use laboratory-supplied ones, be cautious. Residual alkaline detergent in these containers can raise the urine pH above 8.5. This can lead to inaccurate results and might suggest improper preservation of the sample. Why It Matters: Alkaline residues can interfere with the pH measurement and make it seem like the urine is more alkaline than it is, which could affect your test results and diagnostic accuracy. Always use the recommended single-use containers provided by the laboratory for collecting urine specimens. If you must use other containers, ensure they are thoroughly rinsed and free from any cleaning agents to avoid contamination. Reagent Strip Reactions for Urine pH The reagent strips used for measuring urine pH, such as Multistix and Chemstrip, utilize a color-changing system to provide accurate readings across a broad pH range. Here’s how these reactions work: Color Indicators Used: 1. Methyl Red:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o pH Range: 4 to 6 o Color Change: Methyl redshifts from red to yellow as the pH increases. This color change helps in detecting more acidic pH levels. o Reaction: ▪ Acidic Conditions (pH < 6): Methyl red remains red or orange, indicating an acidic environment. ▪ Neutral to Slightly Alkaline Conditions (pH ≥ 6): The color transitions from orange to yellow. 2. Bromthymol Blue: o pH Range: 6 to 9 o Color Change: Bromthymol blue shifts from yellow to blue as the pH increases, allowing the detection of more alkaline conditions. o Reaction: ▪ Neutral Conditions (pH ~ 6): Bromothymol blue is green. ▪ Alkaline Conditions (pH > 6): The color changes from green to blue as the pH becomes more alkaline. Overall Reaction Process: Methyl Red Reaction: In acidic conditions, methyl red is red; as the pH rises, it turns orange and eventually yellow. Bromthymol Blue Reaction: At neutral pH, bromthymol blue is green; as the pH increases, it turns blue. Visual Interpretation: pH 5: The strip appears orange due to the dominance of methyl red's red-to-orange transition. pH 6: The color shifts to yellow as methyl red changes. pH 7: The strip shows green due to the mixed effects of methyl red's yellow and bromothymol blue's green. pH 9: The strip turns deep blue as bromothymol blue reaches its maximum blue color. Interference:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS No Known Interferences: The reagents used in these strips are specifically designed to avoid interference from substances commonly found in urine. Therefore, reagent strips provide reliable pH measurements without significant impact from other urinary components. SUMMARY PpH of URINE Strip Reagent Methyl red and bromthymol blue. Sensitivity Multistix: pH 5.0 to 8.5, with 0.5 increments. Chemstrip: pH 5.0 to 9.0, with 1.0 increments. Sources of No known substances interfere but be aware of potential issues like run- Error/Interference: over and old specimens. Correlations with Correlates with nitrite and leukocyte tests, and findings from Other Tests: microscopic examination. 2. Protein in Urine Among the routine chemical tests conducted on urine, protein determination is one of the most revealing indicators of renal health. Proteinuria, or the presence of excess protein in urine, is often associated with early renal disease, making the urinary protein test a crucial component of any comprehensive physical examination. Under normal conditions, urine contains very little protein—typically less than 10 mg/dL or 100 mg per 24 hours. This protein primarily consists of low-molecular-weight serum proteins that have been filtered by the glomeruli, as well as proteins produced within the genitourinary tract. The major serum protein found in urine is albumin, known for its low molecular weight. Despite its high concentration in plasma, the urinary albumin level is usually low because most of the albumin filtered by the glomeruli is reabsorbed by the renal tubules. In addition to albumin, normal urine may contain small amounts of other proteins, including: Serum and Tubular Microglobulins: These are low-molecular-weight proteins found in the blood and produced by renal tubular cells. Tamm-Horsfall Protein (Uromodulin): Produced by the renal tubular epithelial cells in the distal convoluted tubule, uromodulin forms the matrix of casts found in urine. Uromodulin, a more recent term for Tamm-Horsfall protein, plays a role in the structure of urinary casts.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Additionally, proteins from prostatic, seminal, and vaginal secretions can also be present in urine. These proteins are typically found in minimal amounts and are usually of no clinical concern unless their levels are significantly elevated. Understanding Proteinuria The presence of protein in urine, or proteinuria, observed during routine tests does not automatically indicate renal disease. However, it is an important finding that necessitates further investigation to determine whether the protein levels are due to normal physiological processes or underlying pathological conditions. Clinical proteinuria is generally considered significant when protein levels reach 30 mg/dL (300 mg/L) or higher. Proteinuria can be categorized based on its origin into three main types: 1. Prerenal Proteinuria: Prerenal proteinuria arises from conditions that affect the plasma before it reaches the kidneys. It is not indicative of intrinsic renal disease but rather results from systemic conditions that lead to an overflow of specific proteins in the bloodstream. This type of proteinuria is typically transient and occurs due to the presence of abnormally high concentrations of low-molecular-weight plasma proteins, which surpass the kidneys' capacity for reabsorption. Common proteins contributing to prerenal proteinuria include: Hemoglobin: Released during hemolysis, the breakdown of red blood cells, which can overload the kidneys. Myoglobin: Released from muscle tissue in cases of muscle injury or rhabdomyolysis. Acute Phase Reactants: Produced in response to infection and inflammation, these proteins, such as fibrinogen, can increase in plasma, leading to prerenal proteinuria. Because the protein overload primarily involves low-molecular-weight proteins rather than albumin, routine urinalysis using reagent strips may not detect prerenal proteinuria, as reagent strips are primarily sensitive to albumin. Bence Jones Protein A classic example of prerenal proteinuria is the excretion of Bence Jones protein. This protein is typically found in patients with multiple myeloma, a type of cancer characterized by the abnormal proliferation of plasma cells, which produce excessive amounts of monoclonal immunoglobulin light chains. These light chains, known as Bence Jones proteins, are small enough to be filtered by the kidneys but exceed the renal tubules' reabsorptive capacity, resulting in their excretion in the  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS urine. While the presence of Bence Jones protein in urine is an important indicator of multiple myeloma, it is not routinely detected through standard urinalysis methods. Diagnosis requires more specific techniques, such as serum protein electrophoresis and immunoelectrophoresis, which help confirm the presence of monoclonal light chains in both serum and urine. Although historical screening tests for Bence Jones protein, such as heating the urine, were once used, modern chemical methods have largely replaced these techniques for detecting multiple myeloma. 2. Renal Proteinuria: Renal proteinuria refers to the presence of excess protein in the urine due to damage within the kidneys. This condition can result from issues with either the glomeruli (the filtering units of the kidneys) or the tubules (the structures responsible for reabsorbing substances from the filtrate). Understanding the underlying cause of proteinuria is crucial for diagnosing and managing kidney- related conditions. Glomerular Proteinuria When the glomerular membrane, responsible for filtering blood, becomes damaged, it disrupts its selective filtration function. This results in the leakage of larger amounts of serum proteins and sometimes blood cells into the urine. Key causes of glomerular proteinuria include: Damage to the Glomerular Membrane: Abnormal substances such as amyloid proteins, toxins, and immune complexes can damage the glomerular membrane. Conditions like lupus erythematosus and streptococcal glomerulonephritis are notable examples. Increased Blood Pressure: Elevated blood pressure can overwhelm the glomerulus, allowing excessive amounts of albumin to pass through. This may occur temporarily due to strenuous exercise, dehydration, or hypertension. In pregnant women, proteinuria in the later stages of pregnancy can be a sign of pre-eclampsia, requiring careful evaluation alongside other symptoms such as high blood pressure. Benign Proteinuria: It’s important to note that the presence of protein in urine, especially from a random sample, does not always indicate disease. Benign proteinuria can occur due to transient conditions such as intense exercise, fever, dehydration, or exposure to cold. Microalbuminuria: Microalbuminuria is the presence of small amounts of albumin in the urine and is often an early sign of diabetic nephropathy, a condition where diabetes damages the kidneys. Detecting microalbuminuria is essential for early intervention, as controlling blood glucose levels and blood pressure can slow or  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS prevent progression to more severe kidney disease. Additionally, microalbuminuria is associated with an increased risk of cardiovascular diseases. Orthostatic (Postural) Proteinuria: Orthostatic proteinuria, also known as postural proteinuria, is a benign condition commonly observed in young adults. It occurs when protein levels in the urine increase due to prolonged standing, but levels normalize when lying down. To diagnose this condition, patients are typically asked to provide a urine sample after lying down for several hours and another sample after standing for a period. A negative result in the first sample and a positive result in the second sample indicate orthostatic proteinuria. Tubular Proteinuria: In tubular proteinuria, the kidneys’ tubules are unable to reabsorb proteins that were filtered through the glomeruli. This type of proteinuria is often due to tubular dysfunction caused by: Toxic Substances: Exposure to certain chemicals or heavy metals. Severe Infections: Viral infections affecting the renal tubules. Fanconi Syndrome: A rare genetic disorder that impacts the kidney’s ability to reabsorb essential substances. 3. Postrenal Proteinuria: Postrenal proteinuria occurs when protein is introduced into the urine after it has left the kidneys. This type of proteinuria is associated with conditions affecting the lower urinary tract and can result from various sources: Infections and Inflammations: Bacterial and fungal infections, as well as inflammations in the ureters, bladder, urethra, prostate, or vagina, can lead to the production of exudates. These exudates, which are composed of protein- rich fluid from the interstitial tissues, can contaminate the urine. Trauma and Menstrual Contamination: Injury to the urinary tract can cause bleeding, introducing blood into the urine. Menstrual blood can also mix with urine, adding protein to the specimen. Prostatic Fluid and Spermatozoa: In males, prostatic fluid can contribute protein to the urine, particularly in cases of prostate inflammation or infection. Similarly, large amounts of spermatozoa, which are present in semen, can be found in urine samples, especially if the specimen is collected shortly after sexual activity.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Reagent Strip Reactions for Protein Detection Traditional reagent strip testing for protein relies on the principle of the protein error of indicators, which leads to a visible colorimetric change when protein is present. Unlike typical indicators that change color in response to pH changes, certain indicators react specifically to the presence of protein, even when the pH of the test medium remains constant. This is due to the ability of proteins, particularly albumin, to accept hydrogen ions from the indicator. The test shows greater sensitivity to albumin because albumin contains more amino groups that can accept hydrogen ions compared to other proteins. This feature makes albumin the primary protein detected by reagent strips. Depending on the manufacturer, reagent strips contain different chemical components. For example: Multistix uses tetrabromophenol blue. Chemstrip uses 3',3",5',5"-tetrachlorophenol, 3,4,5,6 tetrabromosulfonphthalein. Both tests utilize an acid buffer to maintain a constant pH of around 3. In the absence of protein, the indicator remains yellow. As the protein concentration increases, the color progresses through shades of green and eventually turns blue. The color change is visually interpreted, and the results are reported as: Negative Trace 1+ (approximately 30 mg/dL) 2+ (approximately 100 mg/dL) 3+ (approximately 300 mg/dL) 4+ (approximately 2000 mg/dL) Trace values, representing protein levels below 30 mg/dL, can be challenging to interpret. Some laboratories may choose to report or disregard trace results  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS depending on their testing protocols. The distinction between trace and higher concentrations is important because trace levels may not always indicate significant proteinuria but may require further investigation based on clinical context. Reagent Strip Reaction Interference Several factors can affect the accuracy of reagent strip results for detecting protein in urine: 1. Alkaline Urine: Highly buffered alkaline urine may override the strip’s acid buffer system, causing a false-positive result due to a rise in pH, not protein concentration. 2. Prolonged Contact: Allowing the reagent strip to sit too long in the urine can remove the buffer, leading to inaccurate readings. 3. False Positives: These can also be caused by: o Highly pigmented urine o Detergents, antiseptics, or quaternary ammonium compounds contaminating the container o High specific gravity of the urine, which may yield a false-positive trace reading. Other Protein Testing Methods in Urinalysis Sulfosalicylic Acid (SSA) Precipitation Test The SSA test is a cold precipitation method that reacts with all forms of protein equally. It is useful as a secondary test when protein interference or other issues are suspected. The SSA test is performed on centrifuged urine to eliminate contamination. The results depend on the laboratory's protocols and the concentration of SSA used. Microalbuminuria Testing Microalbuminuria is the presence of small amounts of albumin in urine, which is often an early indicator of kidney disease. Several semiquantitative methods are used to monitor patients at risk for renal disease, especially diabetics. These tests utilize random or first-morning urine samples. Key Methods: 1. Micral-Test (Roche Diagnostics) o Principle: This reagent strip test uses an immunochemical assay for detecting albumin. o Procedure:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS ▪Strips contain a gold-labeled antihuman albumin antibody-enzyme conjugate. ▪ The strip is dipped in the urine to a marked level and held for 5 seconds. ▪ Albumin binds to the antibody on the strip. ▪ The bound and unbound conjugates move up the strip by wicking action. ▪ Unbound conjugates are captured in a captive zone by combining with albumin embedded in the strip. ▪ The remaining bound conjugates move up the strip and react with an enzyme substrate, changing the color. o Results: ▪ The color develops within 1 minute and ranges from white to red. ▪ Albumin concentration is compared to a chart, with results ranging from 0 to 10 mg/dL. 2. ImmunoDip (Sakisui Diagnostics) o Principle: This method uses an immunochromatographic technique to detect albumin in urine. o Procedure: ▪ Strips are individually packaged in containers designed for urine collection. ▪ The container is placed in the urine for 3 minutes. ▪ A controlled amount of urine enters the container through a vent, where it interacts with blue latex particles coated with antihuman albumin antibodies ▪ Albumin binds to the latex particles. ▪ Both bound and unbound particles migrate up the strip; the unbound particles form the first blue band and the bound particles form a second blue band. o Results: ▪ The intensity of the two blue bands is compared with the manufacturer's color chart. ▪ A darker bottom band represents less than 1.2 mg/dL (negative result).  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS ▪ Equal color bands indicate 1.2 to 1.8 mg/dL (borderline result). ▪ A darker top band represents 2.0 to 8.0 mg/dL (positive result). Albumin Creatine Ratio (ACR) Testing The albumin creatine ratio (ACR) is a key indicator used to assess kidney function, particularly in detecting the early stages of kidney disease. This ratio provides a more reliable estimate of albumin excretion by accounting for variations in urine concentration, which can occur due to hydration levels. Purpose: The ACR test helps estimate 24-hour albumin excretion in a random urine sample by comparing the amount of albumin to the creatinine concentration. Creatinine is excreted relatively consistently for each individual, allowing for adjustments based on urine concentration variations. Key Points: Reagent Strips: The Clinitek Microalbumin and Multistix Pro reagent strips (Siemens Healthcare Diagnostics) simultaneously measure albumin and creatinine in a urine sample. Correcting for Hydration: Hydration and dehydration can affect urine concentration. By comparing albumin excretion to creatinine excretion, the test corrects for these variations. Albumin-Specific Reaction: These strips use a dye-binding reaction for albumin measurement, which is more specific than the protein error of indicators typically used for routine protein testing. The albumin low-test pad is designed to increase specificity, ensuring more accurate detection of albumin in the presence of other proteins or urine constituents. Clinical Application: The ACR is particularly useful in: o Detecting microalbuminuria, an early sign of kidney damage, especially in patients with diabetes or hypertension. o Monitoring kidney function and the progression of kidney disease over time.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o By providing an adjusted albumin measurement relative to creatinine, the ACR offers a more reliable evaluation of kidney health, helping clinicians identify issues early and implement appropriate interventions. Other Protein Testing Methods in Urinalysis using Reagent Strip Reaction Albumin Reagent Strip Reactions are a specialized method for detecting albumin in urine, with increased sensitivity and specificity compared to conventional protein reagent strips. These strips use the dye bis(3',3"-diiodo-4',4"-dihydroxy-5',5"-dinitrophenyl)-3,4,5,6-tetrabromo sulphonphthalein (DIDNTB), providing accurate measurements of albumin levels in urine. Key Features of Albumin Reagent Strips: Dye Composition: o The dye DIDNTB allows the strips to have higher sensitivity to albumin, enabling the detection of albumin levels between 8 and 15 mg/dL (80 to 150 mg/L), whereas conventional strips only detect levels at or above 30 mg/dL. Specificity: o DIDNTB strips focus on detecting albumin only, excluding other proteins that may be present in the urine, which makes them more specific for albuminuria detection. Interference Control: o Highly buffered alkaline urine, which often causes issues with conventional reagent strips, is mitigated in this method by the use of paper treated with bis- (heptapropylene glycol) carbonate. o The addition of polymethyl vinyl ether helps reduce the nonspecific binding of polyamino acids to the albumin pad, which could otherwise interfere with the results. Color Range: o The reaction results in a color progression from pale green to aqua blue, depending on the albumin concentration in the sample. Sources of Error: o Falsely elevated results may occur in the presence of visibly bloody urine. o Abnormally colored urine can interfere with the strip readings, potentially affecting the accuracy of results. Creatinine Reagent Strip Reaction is based on the pseudoperoxidase activity of copper- creatinine complexes to measure creatinine levels in urine. This method allows for semi-  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS quantitative analysis of creatinine, which is often used to help calculate the albumin ratio for evaluating kidney function. Key Aspects of the Creatinine Reagent Strip Reaction: Reaction Principle: o The reaction involves copper sulfate (CuSO₄) combining with creatinine in the urine to form copper-creatinine peroxidase, which then reacts with diisopropyl benzene dihydroperoxide (DBDH), releasing oxygen ions. o These oxygen ions oxidize the chromogen 3,3',5,5'-tetramethylbenzidine (TMB), causing a color change from orange to green to blue as creatinine levels increase. Chemical Reaction: o CuSO₄ + CRE → Cu(CRE) peroxidase o Cu(CRE) peroxidase + DBDH + TMB → oxidized TMB + H₂O o The color change is produced by the oxidation of TMB, shifting from orange to blue as creatinine levels rise. Measurement Range: o Creatinine levels are reported as 10, 50, 100, 200, 300 mg/dL (or 0.9, 4.4, 8.8, 17.7, 26.5 mmol/L). Falsely Elevated Results: o Visibly bloody urine can interfere and produce falsely elevated creatinine readings. o The medication cimetidine (Tagamet), which is used to reduce stomach acid, can also cause false elevation. o Abnormally colored urine may also interfere with the accuracy of the readings. Purpose of Creatinine Measurement: o No creatinine reading is considered abnormal, as creatinine is typically present in the range of 10 to 300 mg/dL in urine. o The primary purpose of creatinine testing on reagent strips is to correlate the albumin concentration with the urine concentration, allowing for the calculation of a semiquantitative albumin ratio. This ratio is essential for monitoring kidney function, particularly for detecting microalbuminuria. The Albumin/Protein; Creatine Ratio Albumin/Protein: Creatine Ratio is a crucial diagnostic tool for assessing kidney function, specifically for detecting abnormal protein excretion, such as in cases of microalbuminuria. Automated and manual methods exist for calculating the A/P: Creatine ratio and these methods rely on different reagent strips designed for both manual use and automated instruments. Key Aspects of the Albumin/Protein: Creatine Ratio: Automated Methods:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o Clinitek Microalbumin Reagent Strips: ▪ These strips are designed for instrumental use only and are read using Clinitek Urine Chemistry Analyzers. ▪ They measure albumin and creatinine concentrations, automatically calculating the Ratio ▪ Results are displayed and printed in both conventional (mg/g) and SI units (mg/mmol). ▪ Abnormal Albumin/Protein: Creatine Ratio ranges from 30 to 300 mg/g or 3.4 to 33.9 mg/mmol, indicating potential kidney damage. Multistix Pro 10 Reagent Strips: o These reagent strips include multiple test pads for substances such as: ▪ Creatinine ▪ Protein-high (total protein) ▪ Protein-low (albumin-specific) ▪ Other urine parameters such as glucose, ketones, blood, nitrite, leukocyte esterase, pH, bilirubin, and specific gravity. o Urobilinogen is not measured on these strips. o The protein-high pad works via the protein error of indicators principle, while the protein-low pad uses the dye-binding method discussed earlier. o Results are reported as the A:P o The protein-low result is typically used in the Albumin/Protein: Creatine ratio calculation. Manual and Automated Reading: o The Multistix Pro 10 strips can be read manually or with automated Clinitek instruments. o Automated calculations on the Clinitek device automatically produce results categorized as normal or abnormal. o If the result is normal but dilute, the recommendation is to recollect the specimen, ensuring it is a first-morning sample to avoid dilution. Manual Calculation: o When the strip is read manually, a manufacturer-supplied chart is used to determine the Albumin/Protein: Creatine Ratio based on the readings of protein-high, protein-low, and creatinine. o The higher result between protein-high and protein-low is used for the ratio calculation. By using these methods, Albumin/Protein: Creatine Ratio provides essential insights into kidney health and allows for early detection of conditions such as microalbuminuria, which can indicate the onset of renal disease, especially in high-risk patients such as those with diabetes or hypertension.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS 3. Glucose Test in Urine Glucose in Urine Testing Glucose testing is the most commonly performed chemical analysis on urine due to its crucial role in detecting and monitoring diabetes mellitus. Since the early stages of diabetes often present with nonspecific symptoms, it is estimated that over half of the global cases remain undiagnosed. As a result, glucose tests for both blood and urine are included in routine physical examinations and play a vital role in large-scale health screening programs. Early diagnosis of diabetes mellitus significantly improves patient outcomes by allowing for timely interventions. Modern reagent strip methods for urine glucose testing have revolutionized this process, enabling individuals to perform self-monitoring at home. This empowers patients to detect abnormal glucose regulation early on, preventing the progression of serious diabetes- related complications. The widespread use of these tests in both clinical settings and personal health monitoring has made a profound impact on diabetes care and management. Clinical Significance of Glucose in Urine Under normal conditions, nearly all glucose filtered by the glomerulus is reabsorbed in the proximal convoluted tubule, resulting in minimal glucose presence in urine. This reabsorption is driven by active transport mechanisms that maintain glucose balance in the body. However, when blood glucose levels rise above 160 to 180 mg/dL—known as the renal threshold—excess glucose is no longer reabsorbed and spills into the urine. This condition, termed glycosuria, is commonly observed in cases of hyperglycemia, particularly in diabetes mellitus. In patients with diabetes, elevated blood glucose levels surpass the renal threshold, causing glucose to appear in the urine. Blood glucose levels fluctuate, and even in non- fasting individuals, a high-glucose meal may temporarily induce glycosuria. Therefore, fasting is recommended before collecting urine for screening, as postprandial glucose may remain in the bladder and affect first morning specimens. For diabetes monitoring, testing 2 hours post-meal provides more accurate results. Gestational diabetes, a form of hyperglycemia that develops during pregnancy, is caused by hormones from the placenta blocking insulin function. This leads to insulin resistance, resulting in elevated glucose levels in both the mother and the fetus. Excess glucose is transferred to the fetus, triggering the baby’s pancreas to produce more insulin, which causes fat storage and results in a large baby (macrosomia). If untreated, both the mother and child are at risk for long-term complications, including type 2 diabetes. Hyperglycemia-associated glycosuria is also seen in disorders affecting hormonal function, including pancreatitis, acromegaly, Cushing syndrome, hyperthyroidism, and pheochromocytoma. These conditions elevate hormones such as glucagon, epinephrine, cortisol, thyroxine, and growth hormone, which counteract insulin's role and promote  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS glucose production by breaking down glycogen stores (glycogenolysis). This leads to increased glucose levels in the blood and subsequent glycosuria. Stress, cerebrovascular trauma, and myocardial infarction also increase epinephrine, further inhibiting insulin secretion and contributing to glycosuria. In contrast, renal glycosuria occurs when glucose appears in the urine without elevated blood glucose levels. This condition is due to impaired glucose reabsorption by the renal tubules and is often seen in end-stage renal disease, cystinosis, and Fanconi syndrome. Additionally, temporary glycosuria may occur in pregnancy due to a lowered renal threshold, unrelated to gestational diabetes. Reagent Strip (Glucose Oxidase) Reaction for Glucose Detection The glucose oxidase method employed by reagent strips offers a specific and efficient test for detecting glucose in urine. The testing area of the strip is embedded with glucose oxidase, peroxidase, chromogen, and a buffer. This setup facilitates a two-step enzymatic reaction: 1. Glucose Oxidase Reaction: o Glucose in the urine reacts with oxygen from the air, catalyzed by glucose oxidase, forming gluconic acid and hydrogen peroxide (H₂O₂) 2. Peroxidase Reaction: o In the second step, peroxidase catalyzes the reaction between hydrogen peroxide and a chromogen, forming an oxidized colored chromogen. The intensity of the resulting color is proportional to the concentration of glucose present in the urine. Chromogens and Color Reactions Manufacturers use different chromogens: o Multistix: Potassium iodide (color change from green to brown). o Chemstrip: Tetramethylbenzidine (color change from yellow to green). Results are reported semi-quantitatively in categories such as negative, trace, 1+, 2+, 3+, and 4+, corresponding to glucose concentrations ranging from 100 mg/dL to 2 g/dL (0.1% to 2%). The American Diabetes Association recommends semiquantitative reporting of glucose. Interferences and Errors in the Glucose Oxidase Reaction  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS False-Positives: These are rare with glucose oxidase as the method is specific for glucose, excluding interference from other reducing sugars. However, contamination from peroxides or strong oxidizing agents, such as disinfectants, can cause false-positive results. False-Negatives: More common and may occur due to: o Presence of strong reducing agents (e.g., ascorbic acid) that inhibit chromogen oxidation. o Manufacturers counter this by adding substances like iodate to neutralize ascorbic acid. o High ketone levels can interfere, though this typically coincides with significant glycosuria, minimizing the issue. o High specific gravity or low temperature can reduce test sensitivity. o Bacterial degradation: The most significant source of error is allowing unpreserved urine samples to remain at room temperature, leading to glucose breakdown by bacteria and false-negative results. The Copper Reduction Test (Clinitest) is a classic method for detecting glucose and other reducing substances in urine. It functions by utilizing the reduction of copper sulfate (CuSO₄) to cuprous oxide (Cu₂O) under alkaline and heated conditions. This process results in a color change, progressing from blue (CuSO₄) to green, yellow, and finally orange/red (Cu₂O), which indicates the presence of reducing substances like glucose. o Test Principle: Detects glucose and other reducing substances in urine by reducing copper sulfate (CuSO₄) to cuprous oxide (Cu₂O) under alkaline and heated conditions, resulting in a color change (blue to orange/red). o Benedict's Solution: Traditional solution using copper sulfate, sodium carbonate, and sodium citrate, requiring heat to observe color change. o Clinitest Tablets: A more modern version that generates heat through a chemical reaction. The tablets contain copper sulfate, sodium carbonate, sodium citrate, and sodium hydroxide. o Reaction Observation: Heat-resistant tubes must be used. After the reaction, the color is compared to a chart to estimate the concentration of reducing substances. o "Pass Through" Phenomenon: At high glucose levels, the color may pass from orange/red to green-brown, causing a false negative if not observed closely. The two-drop method can minimize this risk. o Sensitivity: Detects glucose at levels of 200 mg/dL but is nonspecific, detecting other reducing sugars (galactose, lactose, fructose, etc.). o Storage: Clinitest tablets are sensitive to moisture, leading to deterioration if not stored properly (evidenced by a blue color or excessive fizzing).  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o Clinical Significance: o Galactosemia Detection: Historically used to detect galactose in newborns, indicating a metabolic disorder (GALT deficiency). Now replaced by newborn blood screening for galactosemia. o Other Sugars: Lactose, fructose, and pentose are less clinically significant. o Non-reducing Sugars: Sucrose (table sugar) is a non-reducing sugar and will not react with Clinitest or glucose oxidase strips, so it cannot be used in glucose detection exercises. 4. KETONES Ketones and Fat Metabolism: Ketones are byproducts of fat metabolism, consisting of three main compounds: acetone (2%), acetoacetic acid (20%), and β-hydroxybutyrate (78%). Normally, these substances are not present in measurable amounts in the urine because when fats are metabolized under normal conditions, they are completely broken down into carbon dioxide and water. However, when the body cannot utilize carbohydrates efficiently, as is the case in certain metabolic disturbances, it resorts to fat metabolism for energy, resulting in ketone production. This shift leads to the appearance of ketones in the urine, a condition called ketonuria. Causes of Ketonuria: 1. Diabetes Mellitus (Type 1): o Ketonuria is most commonly associated with diabetes mellitus, particularly insulin- dependent (type 1) diabetes. In these cases, the body lacks sufficient insulin to utilize glucose, so it turns to fat for energy. The resulting ketones can accumulate in the blood and urine. 2. Vomiting: o Frequent vomiting can lead to carbohydrate loss, prompting the body to metabolize fat instead. This condition often arises in illnesses that affect nutrient absorption or in severe gastrointestinal issues. 3. Starvation and Malabsorption: o When the intake of carbohydrates is inadequate due to starvation or malabsorption disorders, the body shifts to breaking down fat, causing an increase in ketone production. Clinical Importance of Ketonuria: Diabetes Management: Ketonuria plays a crucial role in the management of type 1 diabetes. Its presence signals that the body is not receiving enough insulin, necessitating dosage adjustments. If untreated, the buildup of ketones can lead to life-threatening conditions like diabetic ketoacidosis (DKA), which is characterized by an imbalance in electrolytes, dehydration, and acidosis, eventually leading to a diabetic coma. Ketonuria Beyond Diabetes: o Although ketonuria is frequently associated with diabetes, it can also occur in patients with illnesses that prevent proper carbohydrate intake or absorption. These patients might show positive ketone results due to insufficient carbohydrate availability or increased carbohydrate loss (e.g., from vomiting).  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o Weight Loss and Eating Disorders: In clinics that treat weight loss or eating disorders, ketonuria can be intentionally monitored to gauge the patient's fat metabolism. A low- carbohydrate diet can trigger ketone production, making it useful for such assessments. o Exercise: High-intensity exercise may lead to the overuse of available carbohydrates, causing the body to metabolize fat. The resulting ketonuria can be potentially harmful, as excessive ketones may become toxic to kidney tubules if not managed. Reagent Strip Reactions for Ketones Overview: Ketone compounds in urine—β-hydroxybutyric acid (78%), acetoacetic acid (20%), and acetone (2%)—are products of fat metabolism. Reagent strip tests, commonly used for detecting ketones, primarily measure acetoacetic acid using the sodium nitroprusside reaction. This method produces a purple color when acetoacetic acid reacts with sodium nitroprusside in an alkaline environment. Although the test does not directly measure β-hydroxybutyrate and is only slightly sensitive to acetone (when glycine is present), the presence of acetoacetic acid implies that other ketones may be present. Ketone Test Results: Results from the reagent strip test are reported as: Qualitative: Negative, trace, small (1+), moderate (2+), large (3+). Semiquantitative: Negative, trace (5 mg/dL), small (15 mg/dL), moderate (40 mg/dL), large (80-160 mg/dL). Reaction Formula: Acetoacetate (and acetone) + sodium nitroprusside + alkaline medium (and glycine) → purple color. Interferences and False Results: False Positives: Medications like levodopa and drugs containing sulfhydryl groups (e.g., MESNA and captopril) may cause unusual color reactions. These reactions may fade over time, whereas the color produced by acetoacetic acid may continue to develop, leading to errors in readings if not timed correctly. False Negatives: Ketone levels may be falsely low if acetone volatilizes or if acetoacetic acid is degraded by bacteria in improperly preserved urine samples. Acetest Tablet: Traditionally, the Acetest tablet was used to confirm reagent strip results for ketones, particularly for severe ketosis in serum and other body fluids. However, it is no longer commonly recommended in modern practice. Components: Sodium nitroprusside, glycine, disodium phosphate, and lactose (which improves color differentiation). If the urine is not absorbed by the tablet within 30 seconds, a new tablet should be used for the test.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS New Methods: Recent developments include reagent strips that measure β- hydroxybutyrate, providing automated testing for serum and other body fluids, making older confirmatory tests like Acetest less relevant in current laboratory practice. 5. BLOOD Blood in urine can manifest either as intact red blood cells (hematuria) or as the breakdown product of red blood cells, hemoglobin (hemoglobinuria). A cloudy red urine indicates hematuria, while a clear red urine suggests hemoglobinuria. In addition to visual examination, chemical tests for hemoglobin is more reliable for detecting blood in urine, as even small amounts of blood can be clinically significant. Clinical Significance Hematuria is typically associated with bleeding due to disorders in the renal or genitourinary systems. Common causes include: Renal calculi (kidney stones). Glomerular diseases (e.g., glomerulonephritis). Tumors affecting the kidney or urinary tract. Trauma to the kidneys or bladder. Pyelonephritis (kidney infection). Exposure to toxic chemicals. Anticoagulant therapy. Hematuria is often investigated in patients experiencing severe back or abdominal pain, as it may indicate renal calculi or other urinary system issues. Nonpathological hematuria can occur after strenuous exercise or during menstruation. Hemoglobinuria results from the lysis of red blood cells (RBCs) either within the urinary tract or due to intravascular hemolysis. In cases of intravascular hemolysis, hemoglobin circulates freely in the blood and is filtered by the kidneys, leading to its appearance in the urine. Causes of hemoglobinuria include: Hemolytic anemias (where RBCs are destroyed). Transfusion reactions (where incompatible blood causes RBC destruction). Severe burns. Infections. Bites from venomous creatures (e.g., brown recluse spider). Strenuous exercise. In hemoglobinuria due to intravascular hemolysis, large amounts of free hemoglobin in the blood exceed the binding capacity of haptoglobin (a protein that binds hemoglobin), resulting in the filtration of hemoglobin by the kidneys. Hemoglobin reabsorption in the kidneys can lead to the formation of hemosiderin granules in urine, which are yellow brown in color and derived from ferritin.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Myoglobin is a muscle protein that reacts positively in reagent strip tests for blood. Myoglobinuria occurs when myoglobin is released into the bloodstream following muscle damage, a condition known as rhabdomyolysis. Conditions leading to myoglobinuria include: Trauma or crush injuries. Prolonged coma. Convulsions. Muscle-wasting diseases. Alcoholism and heroin abuse. Severe exertion. Myoglobin can cause acute renal failure due to its toxic effects on the kidney tubules. This is similar to the acute renal failure seen in hemoglobinuria following hemolytic transfusion reactions. Patients on statin medications for cholesterol control are at risk of developing rhabdomyolysis, which can lead to myoglobinuria. Key Differences: Hematuria involves intact red blood cells in the urine, often linked to kidney or urinary tract conditions. Hemoglobinuria results from the breakdown of red blood cells, with free hemoglobin in the urine, typically linked to hemolytic events. Myoglobinuria involves the release of muscle protein myoglobin, commonly caused by muscle injury or destruction. Reagent Strip Reactions for Blood in Urine Reagent strips detect blood in urine using the pseudoperoxidase activity of hemoglobin and myoglobin, allowing these proteins to catalyze a reaction between the heme component and the chromogen tetramethylbenzidine. This reaction results in the formation of an oxidized chromogen with a green-blue color, indicating the presence of blood components. The Reaction: This reaction is facilitated by peroxidase activity. Reagent Strip Design: The reagent strips are designed with peroxide and tetramethylbenzidine in the blood testing area, and they provide two distinct color charts to reflect reactions associated with: Hemoglobinuria Myoglobinuria  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Hematuria (intact red blood cells, RBCs) 1. Uniform Color: In cases of hemoglobinuria or myoglobinuria, the strip produces a uniform color progression from yellow (negative) to green or green-blue (strong positive). 2. Speckled Pattern: In cases of hematuria (intact RBCs), the RBCs lyse upon contact with the reagent pad, releasing hemoglobin and causing isolated reactions, resulting in a speckled pattern on the pad. The reagent strip is highly sensitive, capable of detecting as low as five RBCs per microliter of urine. Results are generally reported as trace, small, moderate, large, or using a grading scale of trace, 1+, 2+, 3+. Reaction Interference: Several factors can interfere with the accuracy of reagent strip tests, causing either false-positive or false-negative results. False-Positive Reactions: Menstrual contamination: Blood from menstrual flow may lead to false-positive results. Oxidizing agents: Detergents like sodium hypochlorite (bleach) in specimen containers can result in false positives. Bacterial enzymes: Certain bacteria, such as Escherichia coli, produce peroxidase enzymes that may cause false-positive reactions. Therefore, sediments containing bacteria should be carefully checked for RBCs. False-Negative Reactions: Ascorbic acid (vitamin C): Traditionally, ascorbic acid interferes with reagent strips, causing false negatives. Modern strips like Multistix and Chemstrip have modifications to reduce this issue. Multistix uses a peroxide resistant to ascorbic acid, while Chemstrip employs an iodate-impregnated mesh to oxidize ascorbic acid before it reaches the reaction pad. Crenated RBCs: In high-specific-gravity urine, RBCs may become crenated and do not lyse when they contact the reagent pad, leading to false-negative results. Other factors: The use of formalin as a preservative, certain hypertension medications such as captopril, and high concentrations of nitrite (greater than 10 mg/dL) may decrease the sensitivity of the test. Additionally, if the urine sample is not thoroughly mixed, RBCs may settle at the bottom, leading to a falsely decreased reading. 6. BILIRUBIN The presence of bilirubin in the urine can serve as an early indicator of liver disease, often detected before clinical signs such as jaundice are present.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Bilirubin Production Bilirubin is a yellow-pigmented compound formed as a degradation product of hemoglobin. RBC Breakdown: Red blood cells (RBCs) have a lifespan of approximately 120 days. After this period, they are broken down in the spleen and liver by phagocytic cells of the reticuloendothelial system. 1. Hemoglobin Breakdown: When RBCs are destroyed, hemoglobin is released and split into its components: o Iron: Reused by the body. o Protein: Also reused by the body. o Protoporphyrin: Converted into bilirubin by the reticuloendothelial cells. 2. Circulating Bilirubin: The newly formed bilirubin binds to albumin in the blood, becoming unconjugated bilirubin, which is water-insoluble and cannot be excreted by the kidneys. 3. Liver Processing: o In the liver, bilirubin is conjugated with glucuronic acid through the action of the enzyme glucuronyl transferase, producing bilirubin diglucuronide (conjugated bilirubin). o Conjugated bilirubin is water-soluble but typically does not appear in urine because it is excreted directly from the liver into the bile duct and then transported to the intestines. 4. Intestinal Metabolism: o In the intestines, bacteria reduce bilirubin to urobilinogen. o Urobilinogen is then oxidized into stercobilinogen and urobilin, which are excreted in the feces.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Clinical Significance of Bilirubin in Urine Only conjugated bilirubin can appear in urine when the normal degradation of bilirubin is disrupted due to conditions such as bile duct obstruction (posthepatic jaundice) or liver damage (hepatic jaundice). The presence of conjugated bilirubin in urine (bilirubinuria) is significant and can indicate underlying liver pathology. Causes of Bilirubinuria: 1. Posthepatic Jaundice: o Obstruction of the bile duct (e.g., gallstones, cancer) causes conjugated bilirubin to leak into circulation, leading to its excretion in the urine. 2. Hepatic Jaundice: o Liver damage (e.g., hepatitis, cirrhosis) disrupts the liver's ability to process bilirubin, allowing conjugated bilirubin to enter the bloodstream and be excreted in the urine. Detecting bilirubin in urine provides an early warning of liver disease and can help determine the cause of clinical jaundice. For example: Posthepatic and hepatic jaundice result in bilirubinuria. Prehepatic jaundice (due to increased RBC destruction) does not produce bilirubinuria because the bilirubin is in the unconjugated form, which cannot be excreted by the kidneys. Bilirubin and Urobilinogen Testing: The combination of urinary bilirubin and urobilinogen levels can further aid in diagnosing the underlying cause of jaundice. Reagent Strip (Diazo) Reactions Routine urine testing for bilirubin is based on the diazo reaction. This chemical reaction occurs when bilirubin in the urine reacts with diazonium salts (e.g., 2,4-dichloroaniline diazonium salt or 2,6-dichlorobenzene-diazonium-tetrafluoroborat) in an acid medium, forming an azo dye. The color of the azo dye changes based on the concentration of bilirubin, with results ranging from tan/pink to violet. The reactions are reported qualitatively as: Negative Small (or 1+) Moderate (or 2+) Large (or 3+) Interpretation Challenges: The reagent strip color reactions for bilirubin can be difficult to interpret due to interference from other pigments present in urine. Automated readers often assist in interpreting these results, especially in the presence of atypical colors during visual examination.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Any questionable results should prompt further testing for accurate diagnosis. Reaction Summary: Reaction Interference in Bilirubin Testing False-Positive Reactions: 1. Urine Pigments: o Phenazopyridine: This medication, used to relieve urinary tract pain, produces a yellow-orange pigment in urine that may be mistaken for bilirubin on initial examination. o Indican and Lodine Metabolites: These substances can also cause false-positive results by influencing the color of the urine. False-Negative Reactions: 1. Exposure to Light: o Bilirubin is unstable and rapidly photo-oxidized to biliverdin when exposed to light. Biliverdin does not react with the diazo test, leading to false-negative results if the urine is not fresh or protected from light. 2. Hydrolysis of Bilirubin Diglucuronide: o When bilirubin diglucuronide (conjugated bilirubin) is hydrolyzed, it produces free bilirubin, which is less reactive in the reagent strip tests, potentially causing false- negative results. 3. High Concentrations of Ascorbic Acid and Nitrite: o Ascorbic Acid (Vitamin C): Concentrations greater than 25 mg/dL can interfere with the test by reacting with the diazonium salt, reducing its availability to react with bilirubin. o Nitrite: High levels of nitrite can also lower test sensitivity by reacting with the diazonium salt. Ictotest Tablets The Ictotest is a confirmatory test for bilirubin, which provides a more sensitive and specific detection method compared to reagent strips. Ictotest Procedure: 1. Components: The Ictotest kit includes: o Testing Mats: Specially designed to retain bilirubin on their surface. o Tablets: Contain p-nitrobenzene-diazonium-p-toluenesulfonate, SSA, sodium carbonate, and boric acid. 2. Testing Steps: o Add Urine: Place ten drops of urine onto the mat. o Reaction: As the urine is absorbed, bilirubin remains on the mat while other substances are washed away.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o Color Change: A blue-to-purple color indicates the presence of bilirubin. Sensitivity: The Ictotest is four times more sensitive than the reagent strip test and can detect bilirubin concentrations as low as 0.05 to 0.1 mg/dL. Interference Management: If interference is suspected, add water directly to the mat after urine application to wash interfering substances into the mat, leaving bilirubin on the surface for accurate detection. 7. UROBILINOGEN Urobilinogen Production and Excretion: Bilirubin Degradation: Conjugated bilirubin is excreted into the intestine, where intestinal bacteria convert it to urobilinogen and stercobilinogen. Reabsorption and Excretion: Some urobilinogen is reabsorbed into the blood, recirculates to the liver, and is then excreted into the intestine through the bile duct. The remaining urobilinogen is oxidized to urobilin and excreted in the urine. Stercobilinogen remains in the intestine and is oxidized to stercobilin, which is excreted in the feces. Normal Urine Levels: Normal Range: Urobilinogen is typically present in urine at concentrations less than 1 mg/dL or 1 Ehrlich unit. Clinical Significance Increased Urobilinogen: 1. Liver Disease: o Impaired liver function decreases the liver’s ability to process urobilinogen, leading to increased levels in the blood and urine. 2. Hemolytic Disorders: o Increased destruction of RBCs results in excess unconjugated bilirubin being presented to the liver. This leads to increased production and reabsorption of urobilinogen, and consequently higher levels in the urine. 3. Constipation: o Can cause falsely elevated urobilinogen levels in urine as a result of slower transit time through the intestines. Absence of Urobilinogen: Biliary Obstruction: The lack of urobilinogen in the urine and feces indicates an obstruction in the bile duct, preventing bilirubin from reaching the intestine. This results in pale stools due to a lack of urobilin. Reagent Strip Reactions Multistix:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Reaction: Uses a modification of the Ehrlich reaction. Urobilinogen reacts with p- dimethylaminobenzaldehyde (Ehrlich's reagent) in an acidic medium to produce colors ranging from light pink to dark pink. Reporting: Results are reported in Ehrlich units (EU), which correspond to mg/dL. Normal readings range from 0.2 to 1 EU, with abnormal levels reported as 2, 4, and 8 EU. Chemstrip: Reaction: Uses an azo-coupling reaction with 4-methoxybenzene-diazonium- tetrafluoroborate. Urobilinogen reacts with the diazonium salt to produce colors from white to pink. Reporting: Results are reported in mg/dL. This method is more specific for urobilinogen compared to the Ehrlich reaction. *The red color indicates a stronger color shade of pink Interference False-Positive Reactions: Medications and Pigments: Certain drugs or urine pigments might affect the test results. However, specific interferences are less commonly noted for urobilinogen testing compared to other parameters. False-Negative Reactions: Test Sensitivity: Reagent strips may not detect very low levels of urobilinogen or may not be able to detect its absence in cases of biliary obstruction. The reaction interference in testing for urobilinogen, particularly with the Ehrlich reaction used on Multistix reagent strips, can result in both false-positive and false-negative results. Here's an elaboration on these interferences: False-Positive Reactions False-positive results in the Ehrlich reaction are caused by Ehrlich-reactive compounds, which can react similarly to urobilinogen but are not actually urobilinogen. These substances include:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS Porphobilinogen: While porphobilinogen can be clinically significant, Multistix reagent strips are not reliable for detecting it. Indican: A substance formed from tryptophan metabolism, which can cause interference. Medications: Certain drugs such as p-aminosalicylic acid, sulfonamides, methyldopa, procaine, and chlorpromazine can also produce false-positive results. Due to the presence of these substances, a more specific test may be needed to confirm elevated urobilinogen. False-Negative Reactions False-negative results are more likely to occur when specimens are not properly preserved or when certain interfering substances are present. Specimen Preservation: When urine samples are not stored correctly, urobilinogen is subject to photo-oxidation, turning into urobilin when exposed to light. Urobilin does not react with the reagent strip tests, causing a false-negative result. Nitrite Interference: In the Chemstrip test, which uses an azo-coupling reaction, high concentrations of nitrite can interfere, preventing the proper reaction between urobilinogen and the diazonium salt. This results in false-negative readings. Formalin as a Preservative: Using formalin, a common preservative, in urine samples can also interfere with the test's accuracy, leading to false negatives in both Multistix and Chemstrip reactions. Sensitivity Considerations Temperature: The sensitivity of the Ehrlich reaction increases with temperature. Thus, testing should be conducted at room temperature for more reliable results. Post-Meal Results: Urobilinogen levels tend to be naturally higher after meals, due to increased bile salt excretion following digestion. 8. NITRITE Nitrite Testing: Clinical Significance The reagent strip test for nitrite is an important tool used for the rapid screening of urinary tract infections (UTIs). It helps detect infections, especially in cases where symptoms might be absent or unclear, making it easier to decide when further testing, such as a urine culture, may be needed. However, it should be noted that this test is not a replacement for urine cultures, which remain the primary method for diagnosing and monitoring bacterial infections. How UTIs Occur and Spread UTIs often begin in the bladder, usually due to external contamination, and can progress upward through the ureters to the renal tubules, renal pelvis, and eventually the kidneys.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS If left untreated, this can lead to serious complications such as pyelonephritis (inflammation of the kidney and renal pelvis), which can damage renal tissue and impair kidney function, potentially causing hypertension or even septicemia. UTIs are typically caused by gram-negative bacteria, including: Escherichia coli (E. coli) Proteus species Enterobacter species Klebsiella species UTI Risk Factors Women are at a higher risk for UTIs than men because of their shorter urethra, which provides a shorter distance for bacteria to travel to the bladder. Patients who are catheterized also face a higher risk of infection. Asymptomatic Infections Many patients with a bladder infection (cystitis) may not display any noticeable symptoms, or their symptoms may be vague. This often means a physician might not think to order a urine culture immediately. In these cases, the nitrite test is a useful tool for identifying bacterial presence early, even when symptoms are absent. It allows for timely treatment, preventing complications like pyelonephritis. Pyelonephritis and Its Impact Pyelonephritis is a more severe infection involving inflammation of the kidneys and renal pelvis. If not treated promptly, it can lead to permanent renal tissue damage, loss of renal function, and other serious outcomes such as hypertension and septicemia. Preventive Role of Nitrite Testing By detecting bacteriuria (bacteria in the urine) early using the nitrite test, physicians can initiate antibiotic therapy, reducing the risk of serious complications. The test can also be used to monitor: The effectiveness of antibiotic therapy during treatment. Patients with recurrent UTIs, where regular screening helps detect new infections. High-risk populations, such as people with diabetes, pregnant women, and individuals with a history of UTIs. Combined Testing with Leukocyte Esterase (LE) Many laboratories use the nitrite test in combination with the leukocyte esterase (LE) test to better assess the need for a urine culture. The LE test detects the presence of white blood cells (leukocytes), which indicates an inflammatory response, further supporting the diagnosis of a UTI when used together with the nitrite test. Reagent Strip Reactions: Nitrite Testing The nitrite test on a reagent strip is based on the ability of certain gram-negative bacteria to reduce nitrate, a normal component of urine, to nitrite, which is not typically found in the urine. This reaction occurs because many bacteria, particularly those responsible for urinary tract infections (UTIs), possess the enzyme reductase needed for the conversion.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS The nitrite is detected through the Greiss reaction, a chemical process in which: 1. Nitrite (NO₂) reacts with an aromatic amine (such as para-arsanilic acid or sulfanilamide) in an acidic environment to form a diazonium compound. 2. This diazonium compound then reacts with tetrahydrobenzoquinolin compounds to produce a pink-colored azo dye, which indicates the presence of nitrite. Although the shades of pink may vary, any detectable pink color is considered clinically significant, suggesting bacteriuria (bacteria in the urine). The results are reported as negative or positive, without indicating the quantity of bacteria. Reaction Interference: Factors Affecting Nitrite Test Reliability Several factors can affect the accuracy of the nitrite test, leading to false-positive or false- negative results. These include: 1. Absence of Reductase in Certain Bacteria: o The test relies on bacteria possessing the enzyme reductase to reduce nitrate to nitrite. o While gram-negative bacteria, such as those from the Enterobacteriaceae family, typically possess this enzyme, gram-positive bacteria and yeasts that may cause UTIs do not. Thus, the nitrite test does not detect these organisms, leading to false-negative results in their presence. 2. Insufficient Contact Time between Bacteria and Nitrate: o For the bacteria to convert nitrate to nitrite, they must remain in contact with the urine for a sufficient duration. oThe first morning urine or a specimen that has remained in the bladder for at least 4 hours is recommended for nitrite testing to ensure enough time for the reaction to occur. o Random urine samples may not show a positive result even in the presence of bacteria, as there may not have been enough time for the conversion, leading to false-negative results. 3. Adequate Nitrate in the Urine: o The presence of nitrate in the urine depends on dietary intake, specifically from foods such as green vegetables.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o While this is typically not an issue in individuals on a normal diet, dietary restrictions could lead to insufficient nitrate levels in the urine, resulting in false-negative nitrite tests. 4. Further Reduction of Nitrite to Nitrogen: o In cases where large amounts of bacteria are present, the nitrite may be further reduced to nitrogen, which does not react in the test, leading to false-negative results. 5. Interference from Medications and Urinary Conditions: o Antibiotics can inhibit bacterial growth and metabolism, preventing the production of nitrite, which may result in false-negative tests. o Ascorbic acid (Vitamin C) at high concentrations can interfere with the diazo reaction used in the nitrite test, as it competes with nitrite for binding with the diazonium salt, reducing the test's accuracy. o High specific gravity in urine may also decrease the sensitivity of the test, leading to false-negative readings. 9. LEUKOCYTE ESTERASE Leukocyte Esterase (LE) Reagent Strip Test Before the introduction of reagent strips, urinary leukocytes (white blood cells) were detected through microscopic examination of urine sediment. However, this method could be prone to variation due to differences in the preparation of the sediment and the experience of the laboratory personnel. The development of the Leukocyte Esterase (LE) reagent strip test provided a more standardized and consistent method for detecting leukocytes in urine. Key Advantages: 1. Standardization: The LE test offers a consistent chemical means to detect leukocytes, eliminating the variations found in manual microscopic examination. 2. Detection of Lysed Leukocytes: The LE test detects leukocytes even if they are lysed, which is especially useful in dilute or alkaline urine where the cells might not be visible microscopically. Clinical Significance: Normal Range: In microscopic examination, the normal range of leukocytes in urine is 0–2 to 0–5 per high-power field (hpf). Women generally have slightly higher numbers due to potential vaginal contamination. Increased Leukocytes (Leukocyturia): A rise in leukocyte numbers often indicates a urinary tract infection (UTI). The LE test specifically detects the enzyme esterase in certain white blood cells, including: o Granulocytic WBCs: Neutrophils, eosinophils, and basophils. o Monocytes.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS o Lymphocytes, erythrocytes (red blood cells), bacteria, and renal tissue cells do not contain esterases and thus do not produce a positive LE result. Neutrophils are the most common type of leukocyte associated with bacterial infections. Other cells like Trichomonas and histiocytes also contain esterase and can contribute to a positive LE result. Conditions Detected: The LE test is especially useful for detecting bacterial infections, where neutrophils are elevated. It also detects infections caused by Trichomonas, Chlamydia, yeast, and inflammatory conditions such as interstitial nephritis, which can produce leukocyturia without bacteriuria (presence of bacteria in the urine). Combined Testing with Nitrite: The LE test is often used in combination with the nitrite test to screen for UTIs. While the nitrite test indicates the presence of bacteria, the LE test indicates the presence of white blood cells (WBCs) in response to infection. The combination of these tests can help determine whether a urine culture is needed. However, the LE test contributes more to the accuracy of this screening process than the nitrite test alone, as it can detect conditions where bacteria may not be present but white blood cells are elevated. Reagent Strip Reaction for Leukocyte Esterase (LE) The reagent strip test for Leukocyte Esterase (LE) operates by utilizing the enzyme activity of esterase, which is present in certain white blood cells. The test detects esterase in urine through a chemical reaction that produces a purple azo dye, indicating the presence of white blood cells. Chemical Process: 1. Leukocyte Esterase catalyzes the hydrolysis of an ester, which is embedded on the reagent pad, to produce two products: indoxyl and an acid. 2. The indoxyl (an aromatic compound) then reacts with a diazonium salt present on the reagent pad. 3. This reaction forms a purple azo dye, which is the visual indicator of the presence of esterase and, by extension, leukocytes in the urine. Reaction Time:  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS The LE reaction takes the longest time of all the reagent strip tests, requiring 2 minutes for completion. Results are typically reported in a semi-quantitative manner: o Trace o Small o Moderate o Large o Alternatively, as trace, 1+, 2+, and 3+. Important Considerations: Trace readings may not be clinically significant and are recommended to be repeated using a fresh specimen to confirm. Reaction Interference: Several factors may affect the accuracy of the LE test, causing either false-positive or false-negative results: 1. False-Positive Reactions: o Strong oxidizing agents (e.g., bleach or other disinfectants) or formalin (used as a preservative in collection containers) can produce false-positive results by interfering with the reagent chemistry. o Highly pigmented urine or the presence of nitrofurantoin (an antibiotic) can obscure the color change, making interpretation difficult. 2. False-Negative Reactions: o High concentrations of protein (>500 mg/dL) or glucose (>3 g/dL) can interfere with the test. o Oxalic acid and ascorbic acid (vitamin C) can lead to false-negative results, as ascorbic acid competes with the diazonium salt and interferes with the formation of the purple azo dye. o Crenation of leukocytes (shrinking and distortion due to a high specific gravity in urine) may prevent the release of esterase, thereby reducing the sensitivity of the test. o The use of certain antibiotics (e.g., gentamicin, cephalexin, cephalothin, and tetracycline) may decrease the sensitivity of the test, leading to false-negative results. These antibiotics can affect the ability of leukocytes to release esterase. Summary of Clinical Utility: Leukocyte Esterase (LE) reagent strip testing provides a quick and standardized method for detecting white blood cells in urine, making it useful in screening for urinary tract infections (UTIs). While the test is reliable, interferences from substances in the urine, such as medications, high concentrations of solutes, and improper handling of the specimen, must be considered to avoid misinterpretation of results.  Analysis of Urine & Other Body Fluids Transcribe notes by J.P Bautista, RMT, MSCLS 10. SPECIFIC GRAVITY Specific Gravity: Reagent Strip Test The reagent strip test for specific gravity is an essential part of both the physical and chemical examination of urine, providing information about the urine's concentration and solute content. Reagent Strip Reaction: The test is based on the change in pK