Manufacturer's Documentations.pptx

MAINTENANCE DOCUMENTATIONS  MAINTENANCE DOCUMENTATIONS TYPES OF DOCUMENTATION Controlled Documents The documentation for Used maintenance is required by the for operation and/or FAA. Advi...

MAINTENANCE DOCUMENTATIONS  MAINTENANCE DOCUMENTATIONS TYPES OF DOCUMENTATION Controlled Documents The documentation for Used maintenance is required by the for operation and/or FAA. Advisory Circular AC 120-16E, maintenance of aircraft in Air Carrier Maintenance Programs, refers to the air carrier accordance with FAA regulations. maintenance manual system, Have limited distribution within maintenance record/documentation keeping system, and various other airlines and require regular requirements. modifications and must include list of Manufacturer’s documentation revisions, active, and revoked page Regulatory documentation numbers in document. Airline-generated documentation ATA document standard Non-Controlled Documents Provided by the operators and manufacturers.  MANUFACTURER’S DOCUMENTATION Maintenance AMM, FIM/TSM, CMM Engineering WDM, ASM, SRM, SB Planning MPD, IPC Operations MMEL, CDL, DDG  Aircraft Maintenance MANUFACTURER’S DOCUMENTATION Manual ⮚ It contains basic information Maintenance required to service, repair, replace, Aircraft Maintenance adjust, inspect, and check Manual (AMM) equipment and systems on the Component Maintenance aircraft. Manual (CMM) Description and operation of Component Location each system Manual (CLM) / System Description Section (SDS) Basic maintenance and servicing Fault Isolation Manual actions (FIM) / Trouble Shooting Functional and operational tests Manual (TSM) Adjustments Replenishing various fluids and  Component Maintenance MANUFACTURER’S DOCUMENTATION Manual ⮚ It contains information required to check, repair, adjust, test and/or overhaul units Maintenance or assemblies, normally performed away Aircraft Maintenance Manual (AMM) from the airplane because of the need Component Maintenance for special equipment. System Description Manual Manual (CMM) (Boeing) / Component Location Component Location Manual (CLM) / System Manual (Airbus) Description Section (SDS) Fault Isolation Manual ⮚ It contains information on component (FIM) / Trouble Shooting location, system operation, and Training Manual (TSM) Information Points for all systems and equipment installed in the aircraft.  MANUFACTURER’S Fault Isolation Manual DOCUMENTATION (Boeing) / Trouble Shooting Manual (Airbus) Maintenance ⮚ It contains information required to Aircraft Maintenance isolate and correct faults in the Manual (AMM) systems and equipment installed in Component Maintenance Non-Destructive the aircraft. Testing Manual (CMM) Component Location Manual (NTM / NDTM) Manual (CLM) / System Description Section (SDS) ⮚ Gives instructions with regard to Fault Isolation Manual specific nondestructive testing (FIM) / Trouble Shooting procedures for the aircraft. Manual (TSM)  Wiring Diagram Manual MANUFACTURER’S DOCUMENTATION ⮚ For Boeing, it is a collection of diagrams, drawings, and lists that define the wiring of associated equipment installed on the Engineering aircraft. Wiring Diagram Manual (WDM) Aircraft Wiring List (AWL) Aircraft Wiring Manual ⮚ For Airbus, WDM is divided into AWL, (AWM) AWM and ASM. Aircraft Schematic Manual (ASM) / System Schematic Manual (SSM) ⮚ It gives a full understanding of the Structural Repair Manual electrical, electronic and electro- (SRM) mechanical system installation and physical connections of the aircraft.  Wiring Diagram Manual MANUFACTURER’S DOCUMENTATION ⮚ Aircraft Wiring List – provides list of wires, connectors, terminals, strip locations, wire routings, and clamping Engineering diagrams. Wiring Diagram Manual (WDM) ⮚ Aircraft Wiring Manual – provides a Aircraft Wiring List (AWL) physical view of systems and Aircraft Wiring Manual subsystems. It reflects the definition of (AWM) the wiring installation. Aircraft Schematic Manual (ASM) / System Schematic Manual (SSM) ⮚ Aircraft Schematic Manual (Airbus) / Structural Repair Manual System Schematic Manual (Boeing) (SRM) – provides schematic diagrams and functional views of electrical, electronic, and hydraulic systems and other  Structural Repair Manual MANUFACTURER’S DOCUMENTATION ⮚ It contains general data and special instructions for the repair of airplane structures and structural components. Engineering Wiring Diagram Manual ⮚ Provides information regarding the (WDM) aircraft skin and other specific tolerances Aircraft Wiring List (AWL) and procedures in the event of minor Aircraft Wiring Manual structural damage. (AWM) Aircraft Schematic Manual ⮚ Contains simple repairs which are (ASM) / System Schematic approved by the FAA and to be Manual (SSM) Structural Repair Manual completed by the operator. Some other (SRM) structural repairs must be done by the airframe manufacturer or other FAA designated repair facilities.  Maintenance Planning MANUFACTURER’S Document DOCUMENTATION ⮚ List of maintenance and servicing tasks to be performed on the aircraft. Maintenance / ⮚ Contains all items of the MRB Report Engineering / Planning along with other information such as Illustrated Parts Catalog CMRs and ALs. Maintenance Planning Document (MPD) ⮚ Produced by manufacturers and Illustrated Parts Catalog describes in comprehensive detail every (IPC) component of the aircraft, along with Service Bulletins (SB) illustrations and their part numbers. Service Letters (SL) Maintenance Tips (MT) ⮚ Contains lists and location diagrams of all parts with their part numbers used in the aircraft.  Service Bulletins MANUFACTURER’S DOCUMENTATION ⮚ SB is the document used by manufacturers of aircraft, engines or their components to communicate Maintenance / details of modifications, maintenance, or Engineering / Planning product improvement which can be embodied in aircraft. Maintenance Planning Document (MPD) ⮚ It includes instructions for modifications, Illustrated Parts Catalog (IPC) substitution of parts, special Service Bulletins (SB) inspections/checks applicable on in- service aircraft. Service Letters (SL) Maintenance Tips (MT) ⮚ Compliance may or may not be mandatory.  MANUFACTURER’S DOCUMENTATION Service Letters ⮚ Usually provides information to improve Maintenance / maintenance actions without equipment Engineering / modification. Planning Maintenance Planning Document (MPD) Maintenance Tips Illustrated Parts Catalog (IPC) ⮚ A suggestion to maintenance personnel Service Bulletins (SB) to assist in their work or improve Service Letters (SL) conditions. Maintenance Tips (MT)  MANUFACTURER’S DOCUMENTATION Master Minimum Equipment List Operations ⮚ Provided by the manufacturer and Master Minimum approved by the authorities. Equipment List (MMEL) Configuration Deviation ⮚ Identifies instruments, systems, or List (CDL) equipment which may be inoperative at Dispatch Deviation the commencement of a flight. Guide (DDG) ⮚ May be associated with special operating conditions, limitations, or procedures.  MANUFACTURER’S Configuration Deviation List DOCUMENTATION ⮚ Provided by the manufacturer and approved by the authorities. Operations ⮚ A listing of regulator-approved non- Master Minimum Equipment List (MMEL) structural external parts that may be Configuration Deviation missing but the airplane remains List (CDL) airworthy. Dispatch Deviation Dispatch Deviation Guide Guide (DDG) ⮚ Guide document intended to secure the aircraft and systems against inadvertent operation when some MMEL items are inoperative.