HAUL TRUCK POSITIONING FOR PRODUCTION LOADING (003) (005).pptx

Producti on Loading HAUL TRUCK POSITIONING FOR PRODUCTION LOADING HAUL TRUCK POSITIONING AIM TO PROVIDE INFORMATION ON PRODUCTION LOADING. REDUCE THE OVERLOAD OCCUANCE AND INCREASE LOAD MOVEMENTS REACHING THEIR DESTINATIONS. IDENTIFY WHAT THE DIG UNIT IS DOING. DOUBLE BENCHING (BENCHING...

Producti on Loading HAUL TRUCK POSITIONING FOR PRODUCTION LOADING HAUL TRUCK POSITIONING AIM TO PROVIDE INFORMATION ON PRODUCTION LOADING. REDUCE THE OVERLOAD OCCUANCE AND INCREASE LOAD MOVEMENTS REACHING THEIR DESTINATIONS. IDENTIFY WHAT THE DIG UNIT IS DOING. DOUBLE BENCHING (BENCHING FORWARDS) SINGLE BENCHING (BENCHING BACKWARDS) ONCE THIS IS IDENTIFIED WE CAN THEN DETERMINE THE CORRECT POSITIONING REQUIRED.  Excavator spotting points Counterweig ht Bucket Teeth Back Back of of the the bucket bucket or or H H bone bone Front Idlers Front of tracks ADVANTAGES OF CORRECT MORE PRODUCTIVE MOST POSITIONING EFFICIENT (TIME/BCM’S MOVED) SHORTER SLEW TIME REDUCE DAMAGE COSTS LOADS ARE POSITIONED CORRECTLY USE/ACCESS THE MOST AMOUNT OF MATERIAL WITH EACH PASS ELIMINATE POSSIBLE HV/HV COUTERWIEGHT STRIKE IMPROVE TYRE LIFE SQUARE TO BENCH FRONT OF THE TRACK OPTIMAL POSITION FOR MAXIMUM EFFICIENCY AND LOAD POSITIONING 45 DEGREE ON THE TEETH IS EFFICIENT AS WELL Correct Bench Height When Possible DOVETAIL LIPPING THE BENCH SQUARE TO DIG FACE INLINE WITH TRACK  Positioning on the front of the Idler View from dump truck onside mirror  45 ON THE FRONT OF THE TRACK OR ON THE TEETH IS USED WHEN PICKING UP THE LOWER BENCH ALLOWS DIGGER OPERATOR TO ACCESS ALL REMAINING MATERIAL ACROSS THE DIG FACE PROVIDES NATURAL SWING ARC THROUGH THE TAIL When lining the side of the truck up on the teeth this means to line all the teeth of the bucket inline with the side of your tray 45 DEGREES GIVES DIGGER OPS ACCESS TO AVAILABLE MATERIAL NOT BLOCKING THE DIG SEQUENCE “PARKED ON MY DIRT” NOT OVERSLEWING