Welding Certificates and Qualification Tests
15 Questions
1 Views

Welding Certificates and Qualification Tests

Created by
@Reusl

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which of the following is NOT a type of supervision defined in the Power Engineers Regulations?

  • General
  • Periodic
  • Unsupervised (correct)
  • Continuous

    • According to the Power Engineers Regulations, what must each entry in a log book include?

  • Printed name and signature of the person providing supervision (correct)
  • Printed name and signature of the assistant shift engineer
  • Printed name and signature of the person operating the boilers
  • Printed name and signature of the chief Power Engineer

    • Where can definitions for positions such as chief steam engineer and shift engineer be found?

  • Power Engineers Regulations (correct)
  • Act or other regulations
  • Engineers Regulations
  • Log Books

    • Which of the following is a suggestion for simplifying searches for information in provincial acts and regulations?

    <p>All of the above</p> Signup and view all the answers

    Which of the following is true about the use of Alberta act and regulations in the exercises?

    <p>The purpose is solely to give experience looking up and reading legislation references</p> Signup and view all the answers

    Which section of the Pressure Equipment Safety Regulation AR 49-2015 describes the requirements for an agency that wishes to apply for a certificate of authorization permit?

    <p>Section AR: 29-15</p> Signup and view all the answers

    Which of the following is true about the responsibilities of the Chief Power Engineer and the Power Engineer in charge of a heating plant?

    <p>They are responsible for updating the log book regularly.</p> Signup and view all the answers

    What is the formula used to calculate plant ratings in Alberta?

    <p>1 m2 of heating surface area = 10 kW</p> Signup and view all the answers

    What committees guide the content and standardization of Power Engineers examinations in Canada?

    <p>Standardization of Power Engineer Examinations Committee (SOPEEC) and Interprovincial Power Engineering Curriculum Committee (IPECC)</p> Signup and view all the answers

    According to the Power Engineers Regulation AR 85-2018, what is the maximum rating for a power plant (general) that a Third Class Power Engineer may operate as Chief Power Engineer?

    <p>Up to 5000 kW</p> Signup and view all the answers

    According to the Power Engineers Regulation AR 85-2018, what is the maximum rating for a power plant (oilfield once-through boiler) that a Third Class Power Engineer may operate as Chief Power Engineer?

    <p>Up to 10,000 kW</p> Signup and view all the answers

    According to the Power Engineers Regulation AR 85-2018, what is a historic boiler?

    <p>A boiler used in traction engines</p> Signup and view all the answers

    According to the Power Engineers Regulation AR 85-2018, what is the range of boiler capacity in kilowatts that a Third Class Power Engineer can operate as shift engineer?

    <p>Up to 10,000 kW</p> Signup and view all the answers

    According to the Pressure Welders Regulation AR 169-2014, what is the name of the card that is part of a certificate of competency and is issued to a pressure welder who succeeds at a performance qualification test?

    <p>Performance qualification card</p> Signup and view all the answers

    According to the Power Engineers Regulation AR 85-2018, what must the owner do in case of unsafe conditions, accident, or fire related to pressure equipment?

    <p>Report to the Administrator within 24 hours</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser