17 Questions
Which type of supervision is required in plants according to the Power Engineers Regulations?
Periodic
What is the purpose of a log book in the context of Power Engineers Regulations?
To serve as a legal document for supervision
Where can definitions for positions like chief steam engineer be found?
In the Engineers Regulations
Which of the following is a duty of the chief Power Engineer of a power plant and the Power Engineer in charge of a heating plant?
Ensure the log book is updated regularly
What is the range of power plant capacity permitted for a Third Class Power Engineer certificate in Alberta?
5000 kW to 10,000 kW
How are plant ratings stated in Alberta?
In kilowatts
What is required to obtain a pressure welder certificate of competency?
All of the above
Which of the following is a suggested method for simplifying searches for information in provincial acts and regulations?
All of the above
What is the purpose of using the Alberta Act and Regulations in the exercises?
To give learners experience looking up and reading legislation references
Which section of the Pressure Equipment Safety Regulation AR 49-2015 describes the requirements for an agency that wishes to apply for a certificate of authorization permit?
Section AR: 49-2015: 16
Which National Fire Prevention Association (NFPA) codes are declared in force in the Pressure Equipment Safety Regulation - AR 49-2015?
NFPA 58 and NFPA 70
According to the Power Engineers Regulation AR 85-2018, what is the maximum rating for a power plant (general) that a Third Class Power Engineer may operate as Chief Power Engineer?
Up to 5000 kW
What is the definition of a historic boiler according to the Power Engineers Regulation AR 85-2018?
A boiler used in a power plant of historic interest
According to the Pressure Welders Regulation AR 169-2014, what is the name of the card issued to a pressure welder who succeeds at a performance qualification test?
Performance Qualification Card
Which section of the Power Engineers Regulation describes the steps that the administrator must follow after the pressure equipment design has been registered?
Section 12
In case of unsafe conditions, accident, or fire related to pressure equipment, what must the owner do?
Contact the administrator
What is the maximum rating for a power plant (general) that a Third Class Power Engineer may operate as Chief Power Engineer?
Up to 5000 kW
Test your knowledge on welding certificates and performance qualification tests with this quiz. Learn about the scope of the certificate, conductors of qualification tests, and other important rules and topics.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
