Urban Planning Regulations in Tamil Nadu

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

When determining the application of FSI and plot coverage regulations, what is taken into consideration?

  • The lowest of the PLR extract/patta and registered ownership document, excluding any encroachment (correct)
  • The sum of the PLR extract/patta and registered ownership document
  • The average of the PLR extract/patta and registered ownership document
  • The highest of the PLR extract/patta and registered ownership document

What is the basis for application of setback regulation?

  • The middle boundary of the plot, including any passage
  • The outer boundary of the plot, including any encroachment
  • The inner boundary of the plot, excluding any encroachment (correct)
  • The entire plot area, including any open spaces

What is plot coverage expressed as?

  • A fraction of the built-up area to the plot area
  • A ratio of the built-up area to the plot area
  • A percentage of the ratio of the built-up area to the plot area (correct)
  • A proportion of the built-up area to the plot area

What is exempted from the computation of plot coverage?

<p>Floor area mentioned in Annexure XVIII (C)</p> Signup and view all the answers

What type of building has only front, rear, and interior open spaces?

<p>All of the above (D)</p> Signup and view all the answers

What is a contiguous parcel of land enclosed by definite boundaries?

<p>A site (A)</p> Signup and view all the answers

What is the maximum FSI allowed in a plot?

<p>1.5 (B)</p> Signup and view all the answers

What is the minimum plot coverage percentage allowed in a plot?

<p>70% (B)</p> Signup and view all the answers

How far should a setback be from the street alignment in a new road?

<p>From the street alignment (D)</p> Signup and view all the answers

What is the maximum allowed height of structures like lavatory, lumber room, etc. in a rear set back?

<p>4.0m (A)</p> Signup and view all the answers

What is the minimum width of corridor required in a plot?

<p>As given in the Annexure XVII (D)</p> Signup and view all the answers

What is the minimum width of internal passage required in a ground floor in CBA?

<p>1.0m (A)</p> Signup and view all the answers

What is the minimum plot frontage required for a building?

<p>4m (D)</p> Signup and view all the answers

What is the maximum height allowed for a building in this regulation?

<p>The maximum height is not specified (B)</p> Signup and view all the answers

What is the minimum set back required for a building abutting a road with a width of 15.25m?

<p>3.0m (A)</p> Signup and view all the answers

What is the maximum Floor Space Index (FSI) allowed for a building in this regulation?

<p>1.5 (D)</p> Signup and view all the answers

What is the minimum percentage of plot coverage required for a building?

<p>75% (B)</p> Signup and view all the answers

What type of structures are permissible in the minimum prescribed front, side, and rear setbacks?

<p>As specified in regulation No. 11 (C)</p> Signup and view all the answers

Flashcards are hidden until you start studying

More Like This

Use Quizgecko on...
Browser
Browser