Plumbing Regulations and Maintenance Quiz

No water closet shall be located in a room or compartment which is not properly ______ and ventilated.

Plumbing systems shall be maintained in serviceable condition by Registered Master ______.

All plumbing fixtures shall be installed properly spaced, to be ______ for their intended use.

Plumbing shall be installed with due regard to the preservation of the strength of structural members and the prevention of damage to walls and other surfaces through fixture ______.

Sewage or other waste from plumbing system which may be deleterious to surface or sub-surface waters shall not be discharged into the ground or into any waterway, unless first rendered innocuous through subjection to some acceptable form of ______.

COMPONENTS: Water distribution system, Fire protection system, Plumbing Fixtures, Sanitary Drainage System, Storm Drainage System, Fuel gas piping ______.

The drainage system shall be designed, constructed and maintained to safeguard against fouling, deposit of solids, clogging and with adequate cleanouts so arranged that the pipes may be readily _______.

All piping shall be of durable NAMPAP-APPROVED materials, free from defective workmanship, designed and constructed by Registered Master Plumbers to ensure satisfactory _______.

Each fixture directly connected to the drainage system shall be equipped with a water-sealed _______.

The drainage pipes piping system shall be designed to provide adequate circulation of air free from siphonage, aspiration or forcing of trap seals under ordinary _______.

Vent terminals shall extend to the outer air and installed to prevent clogging and the return of foul air to the _______.

Plumbing systems shall be subjected to such tests to effectively disclose all leaks and defects in the _______.

All premises intended for human use or habitation shall be provided with a supply of pure and wholesome water, neither connected to unsafe water supply nor subject to ______ or back-siphonage.

Plumbing fixtures, devices, and appurtenances shall be supplied with water in sufficient volume and pressure adequate to function satisfactorily and without undue ______.

Plumbing shall be designed and adjusted to use the minimum quantity of water consistent with proper performance and ______.

Devices for heating and storing water shall be so designed and installed as to prevent dangers from explosion through ______.

Every building abutting on a street, alley, or easement with a public sewer shall connect its plumbing fixtures to the ______ system.

Plumbing fixtures shall be made of smooth non-absorbent material, free from concealed fouling surfaces and shall be located in ______ enclosures.