Ch 2 - Network Topologies and Cabling Standards (Network+)

<p>Twisted pair cable (D)</p> Signup and view all the answers

<p>Mesh Topology (D)</p> Signup and view all the answers

<p>UTP cable (C)</p> Signup and view all the answers

<p>RJ45 connectors (C)</p> Signup and view all the answers

<p>Simplified troubleshooting (A)</p> Signup and view all the answers

<p>Redundancy and fault tolerance (D)</p> Signup and view all the answers

<p>Increased complexity (A)</p> Signup and view all the answers

<p>A wireless network in a large building (A)</p> Signup and view all the answers

<p>Lower cost (A)</p> Signup and view all the answers

<p>Single-mode fiber (C)</p> Signup and view all the answers

<p>To create a more secure environment for the vehicle inspection area (B)</p> Signup and view all the answers

<p>Meeting the performance requirements of the administrative and inspection buildings (C)</p> Signup and view all the answers

<p>The number of employees working at the DMV (A)</p> Signup and view all the answers

<p>Single-mode fiber (B)</p> Signup and view all the answers

<p>High bandwidth and long distances (D)</p> Signup and view all the answers

<p>Cat 6 UTP (A)</p> Signup and view all the answers

<p>The performance requirements of the network (B)</p> Signup and view all the answers

<p>To ensure that the network can handle high traffic (B)</p> Signup and view all the answers

<p>Determining the physical layout of network components (A)</p> Signup and view all the answers

<p>W3C (A)</p> Signup and view all the answers

<p>Details of network cabling and hardware (C)</p> Signup and view all the answers

<p>Network topology (D)</p> Signup and view all the answers

<p>Challenges in gathering necessary network information (C)</p> Signup and view all the answers

<p>Design the network topology (B)</p> Signup and view all the answers

<p>To facilitate troubleshooting and upgrades (D)</p> Signup and view all the answers

<p>Network media (C)</p> Signup and view all the answers

<p>To set international standards for compatibility and communication (C)</p> Signup and view all the answers

<p>Single-mode fiber (C)</p> Signup and view all the answers

<p>Category 6A, Riser (C)</p> Signup and view all the answers

<p>Breakout cables have a single fiber for each port (A)</p> Signup and view all the answers

<p>OM5 (C)</p> Signup and view all the answers

<p>Category 6 (D)</p> Signup and view all the answers

<p>To ensure compatibility with future technologies (C)</p> Signup and view all the answers

<p>ANSI is the official U.S. representative of ISO (C)</p> Signup and view all the answers

<p>Category 6A, Riser (A)</p> Signup and view all the answers

<p>Multimode fibers are cheaper and easier to install (D)</p> Signup and view all the answers

<p>Higher cost of installation (B)</p> Signup and view all the answers

<p>The combined cabling for both buildings (D)</p> Signup and view all the answers

<p>Providing financial support to manufacturers (D)</p> Signup and view all the answers

<p>Distance, performance, and future-proofing (C)</p> Signup and view all the answers

The physical layout of network cabling and hardware.

Specification of types and standards for network cables used.

Arrangement of network components in a tangible space.

The abstract representation of how data flows in a network.

Installation path for network cables in a network.

Device that allows wireless devices to connect to a wired network.

Records detailing the network layout and equipment used.

Govern entities like ANSI, TIA, IEEE that set networking standards.

Institute of Electrical and Electronics Engineers, a professional organization that develops technology standards.

A set of network protocols standardized by IEEE, mainly concerning local area networks (LANs).

A common technology for wired local area networks defined by IEEE standards.

Local area networks that connect devices wirelessly, often governed by the IEEE 802.11 standard.

A topology where all nodes share a single communication line.

A topology where nodes are connected in a circular path.

A topology with a central hub connecting all nodes.

A topology where every node connects to every other node.

The point where the public network ends and the private network begins.

Main Distribution Frame - central point for a network.

Intermediate Distribution Frame - connects to the MDF for distribution.

A panel used to connect incoming and outgoing lines.

Unshielded Twisted Pair - a type of cable for networking.

Cable that uses light to transmit data, enabling high-speed communication.

A standard connector for UTP cables, often used for network connections.

The process of setting up network components and cabling.

Advice on the type of cabling best suited for a network setup.

Comparison of the cost of a cabling solution to its performance capabilities.

A design consideration between cost and capability effectiveness.

The process of setting up wired connections for network communication.

Regulations that ensure safety measures are implemented to prevent fire hazards.

Designing a system to ensure longevity and adaptability to new technologies.

A type of cabling that supports higher frequencies and speeds for data transmission.

Cable designed for vertical spaces in a building, safe for fire regulations.

Cable rated for air handling spaces, offering low smoke and flame characteristics.

Different levels of multimode fiber optic cables defined by their bandwidth capabilities.

A cable that splits into multiple fibers for individual connections.

A type of cable used for delivering signals to multiple locations.

Fiber optic cable designed for long-distance communication with a single light path.

Fiber optic cable that transmits multiple light modes for shorter distances.

An international body that develops and publishes standards for various industries.

The U.S. organization that oversees the development of consensus standards for products and services.

A trade association that provides standards and guidelines for telecommunication industries.