Motor Drive Unit Operating Instructions

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the primary function of the Motor Drive Unit MA 9?

To control electronic signals.

To operate mechanical components. (correct)

To monitor temperature variations.

To regulate fluid flow.

Which of the following statements accurately describes the printing details of the operating instructions for the MA 9?

They were printed in 2023.

The document is categorized as No. 80/01. (correct)

They include a Telex number for international calls. (correct)

The location of operation is in the USA.

Based on the contents, what seems to be the focus of the first section?

General overview. (correct)

Troubleshooting methods.

Safety precautions.

Installation procedures.

In which country is the Maschinenfabrik Reinhausen GmbH located?

Germany Signup and view all the answers

What type of information is likely included in the 'Technical data' section?

Performance specifications. Signup and view all the answers

What page number is associated with the section titled 'DESIGN'?

4 Signup and view all the answers

Which item would NOT be expected in the '<GENERAL>' section of the instructions?

Detailed operational procedures. Signup and view all the answers

Which of the following is likely NOT a section found in the operating instructions?

Category and classification system. Signup and view all the answers

What component is attached to the mounting panel in the gearing system?

Transmission gear Signup and view all the answers

What does one revolution of the cam disc indicate in the gearing system?

Initiation of a tap change operation Signup and view all the answers

Which part indicates the initial position for a tap change operation?

Red center mark Signup and view all the answers

What is the purpose of the tap change indication wheel?

To indicate the status of tap change operations Signup and view all the answers

In which direction does the crank rotation sense for a tap change operation cause the gear to 'raise'?

Clockwise Signup and view all the answers

What happens to the electrical motor when the hand crank is removed?

The electrical motor blocking is cancelled. Signup and view all the answers

Which of the following is a step involved in changing from manual service to motor service?

Remove the hand crank. Signup and view all the answers

In the operation of the diverter switch, what is the significance of cranking in the direction of the bigger number of sections?

It ensures correct operation is achieved. Signup and view all the answers

What should be checked after completing the operation in the diverter switch process?

The number of sections in the opposite direction. Signup and view all the answers

What is the first action required for the operation of the diverter switch?

Removing the hand crank. Signup and view all the answers

What emerges as a consequence of failing to remove the hand crank when switching to motor service?

Preventing the motor from engaging. Signup and view all the answers

Which component is directly involved in the connection as per the wiring diagram for the motor drive unit?

Electrical leads. Signup and view all the answers

What is the primary function of the blocking mechanism in the electrical motor?

To prevent accidents during manual operation. Signup and view all the answers

What does the symbol '£' likely represent in the content?

Pound Sterling Signup and view all the answers

What could '8s' represent in the context of the presented content?

Eight shillings Signup and view all the answers

How is 'Ton' likely used in this content?

As a measurement of weight Signup and view all the answers

What might 'E3' refer to in this context?

A grade level Signup and view all the answers

What does 'WOODY' suggest in this content's context?

A brand name Signup and view all the answers

Why might 'AL3JVS' be significant in the content?

It is a model number Signup and view all the answers

What does 'FAN EINE' likely refer to?

A brand of fan Signup and view all the answers

What is the implication of multiple currency symbols ('£', '¥') appearing in the content?

They indicate different countries’ currencies Signup and view all the answers

What does the repeating character pattern in the content suggest?

A coding error Signup and view all the answers

What might 'holins' refer to in the text?

A brand of furniture Signup and view all the answers

What happens when motor contactor K1 drops?

It opens contacts 1-2, 3-4, and 5-6 in the motor circuit. Signup and view all the answers

What is the effect of pressing push-button S1?

It prevents energization of K1 through N/C contact 51-52. Signup and view all the answers

Which auxiliary contacts are affected when K20 is de-energized?

Contacts 13-14, 23-24, 33-34 are opened. Signup and view all the answers

What occurs when push-button S2 is operated?

Motor contactor K2 is energized. Signup and view all the answers

What role does auxiliary contact K20 play in the circuit?

It provides feedback to prevent K1 from energizing. Signup and view all the answers

Which contacts are closed when motor contactor K1 is opened?

Contact 31-32 and 21-22. Signup and view all the answers

What is the condition for K20 to remain energized?

S2 must not be operated. Signup and view all the answers

Which statement is true regarding the function of the direction-memory cam switch S12?

It determines the direction of motor M1 rotation. Signup and view all the answers

The weight of the system is approximately 80 kg.

False Signup and view all the answers

The heater's input during running time is 16 VA.

True Signup and view all the answers

The insulation level provided is 3.5KkV r.ms. for 1 minute.

False Signup and view all the answers

The electrical control for the gearing operates based on a continuous motor run.

False Signup and view all the answers

The system's cabinet is composed of stainless steel.

False Signup and view all the answers

Cranking the tap changer towards 10 in operating position 11 requires 7 sections to be counted until the red center mark appears.

False Signup and view all the answers

The diverter switch action occurs after cranking in the direction of the smaller number of sections.

False Signup and view all the answers

If the numbers of sections counted in both directions are different, the motor drive must be adjusted by the total difference of numbers.

False Signup and view all the answers

Counting the sections during the tap changer operation is unnecessary after the diverter switch action.

False Signup and view all the answers

The tap change indication wheel is divided into 30 sections which allow for detailed monitoring of tap change operations.

True Signup and view all the answers

The position of the bolts when mounting the motor drive unit does not need to be adjusted regarding the crank shaft.

False Signup and view all the answers

Coupling tap changer operations involve only manual cranking methods.

False Signup and view all the answers

Completing the operation of the coupling tap changer includes checking the number of sections in the opposite direction.

True Signup and view all the answers

Using vibration dampening connectors is recommended when the transformer does not cause any mechanical vibrations.

False Signup and view all the answers

The number of sections should ideally be equal when counted in both rotation senses.

True Signup and view all the answers

The adjustment value during cranking on the tap changer is irrelevant to the operation.

False Signup and view all the answers

The coupling tap changer operation is an entirely one-directional process.

False Signup and view all the answers

One tap change operation corresponds to three rotations of the tap change indication wheel.

False Signup and view all the answers

The drive shaft and bevel gear must be mounted carefully as per Operating Instructions No. 42.

True Signup and view all the answers

The operation of a tap changer is significantly symmetrically structured.

True Signup and view all the answers

Minor asymmetry is completely inadmissible in the tap change indication wheel's section count.

False Signup and view all the answers

The hand crank must be removed to allow the electrical motor to block during the transition to motor service.

True Signup and view all the answers

Cranking in the direction of the smaller number of sections is necessary for proper operation of the diverter switch.

False Signup and view all the answers

Disconnecting the electrical leads from the motor drive unit is a required step before operating the diverter switch.

False Signup and view all the answers

The operation of the tap changer types A, MS, M, and R is not related to the diverter switch mechanism.

False Signup and view all the answers

After completing the operation, one must check the number of sections in both directions to ensure correctness.

True Signup and view all the answers

Cranking on by correction value must be completed before checking the number of sections.

True Signup and view all the answers

The diverter switch mechanism operates independently of the electrical motor's safety mechanisms.

False Signup and view all the answers

The coupling to tap changer types A, MS, M, and R indicates different configurations for motor service.

True Signup and view all the answers

The symbol '£' indicates a currency that is typically associated with the United States.

False Signup and view all the answers

The abbreviation 'E3' in the content likely refers to a measurement of electric energy.

False Signup and view all the answers

The term 'holins' in the content most likely refers to a type of mechanical component.

True Signup and view all the answers

The content suggests that '8s' represents a form of currency based on its contextual usage.

False Signup and view all the answers

The weight of the system is approximately 80 grams according to the content.

False Signup and view all the answers

The input of the heater during running time is specified as 16 watts.

False Signup and view all the answers

The insulation level is provided as 3.5KV r.ms. for 1 minute.

True Signup and view all the answers

The content includes a variety of currency symbols, indicating a global perspective.

True Signup and view all the answers

The phrase 'Ton' likely relates to a measure of weight or an amount.

True Signup and view all the answers

The repeated character pattern in the content indicates a focus on maintaining aesthetic uniformity.

False Signup and view all the answers

Study Notes

General Information

Operating Instructions for the Motor Drive Unit MA 9 provided by Maschinenfabrik Reinhausen, Germany.
Document printed in Germany, indicating contact details for the company, including phone, fax, and telex numbers.

Technical Data and Design

Gearing includes transmission and control gear components.
Transmission gear affixed to the mounting panel, control gear located on one side of the transmission gear.
The control gear features:
- Cam disc for operating cam switches.
- Tap change indication wheel.
- Mechanical position indicator.
The tap change indication wheel and cam disc complete one revolution per step.

Gearing Specifications

Gearing Composition: Consists of the transmission gear and control gear.
Number of Cogs: Not specified in the excerpt, identified as 3N.
Revolutions:
- Control gear achieves a specified number of revolutions per minute during switching operations.
- Crank rotation in a clockwise direction signifies a "Raise" action.

Motor Control Mechanism

Motor contactor K1 is responsible for opening multiple contacts in both motor and control circuits.
Auxiliary contact K20 de-energizes upon certain conditions leading to the control circuit contacts opening and closing as described.
Push-buttons S1 and S2 play a crucial role in energizing/de-energizing motor contactors, affecting the motor's rotation direction.

Position Control

When controlling towards position 1:
- Operation of push-button S2 leads to motor contactor K2 being energized and the motor rotating counterclockwise.
- The direction-memory cam switch S12 is activated to maintain the desired rotation direction.

Electrical Service Preparation

Electrical leads require careful connection per the wiring diagram for proper operation of the motor drive unit.
Transitioning from manual service to motor service involves removing the hand crank, ensuring the safety switch is released to allow motor operation.

Operational Notes

The document outlines the importance of monitoring and adjusting settings in relation to the tap changer types A, MS, M, and R.
Emphasis on procedure correctness for counting sections after selector switch actions in both directions, ensuring consistent operation within the system.

Operating Parameters

35 operating positions available for control mechanisms.
Voltage for control and heater set at 220 VAC.
Control heater input requirements: 52 VA (initial), 16 VA (running).
Heater power dissipates 30 W continuously during operation.

Insulation and Design

Insulation level rated at 2.5 kV r.ms., tested for one minute.
Unit weight approximates 60 kg.
Cabinet made from light-metal cast, consisting of two parts (tank and cover).
Outdoor design rated with protection level IP 54, equipped with labyrinth-breathers for ventilation.

Mechanical and Electrical Components

Gearing features a maintenance-free transmission gear, using grease lubrication.
Flanged motor design facilitates effective coupling.
Step-by-step electrical control: operation regulated by cam mechanism that performs one revolution per tap.

Assembly Guidelines

Adjust motor drive unit height based on the difference in the number of sections counted in both directions.
Mount motor drive unit vertically, ensuring alignment with crank shaft.
Vibration dampening connectors recommended if mechanical vibrations from the transformer are significant.

Tap Change Operations

One tap change operation corresponds to a single rotation of the tap change indication wheel, divided into 30 sections.
Minor asymmetry in section counting between rotation directions is acceptable.

Electrical Service Preparation

Electrical connections to the motor drive unit must follow the specified wiring diagram.
Transitioning from manual to motor service involves removing the hand crank, activating a safety switch to block the motor.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

This quiz focuses on the operating instructions for the Motor Drive Unit, specifically from the German manufacturer's manual. Test your understanding of the key concepts and functionalities outlined in the operating manual, and ensure you can effectively manage this equipment.