Podcast
Questions and Answers
The ICT E-300 Cooling Tower structure is made of stainless steel.
The ICT E-300 Cooling Tower structure is made of stainless steel.
False (B)
What should the operator do after pressing the red 'STOP' button during troubleshooting?
What should the operator do after pressing the red 'STOP' button during troubleshooting?
- Insert the button cover plate (correct)
- Refill the cooling tower basin
- Close all isolation valves
- Reset the control system
What is the purpose of RO-352 in the cooling tower system?
What is the purpose of RO-352 in the cooling tower system?
- Provide a backup cooling water source
- Increase pump discharge pressure
- Maintain a constant temperature
- Control the minimum flow rate through the system (correct)
What type of oil is recommended for lubricating the gear drive in the cooling tower?
What type of oil is recommended for lubricating the gear drive in the cooling tower?
What is the primary function of the drift eliminators in the E-300 cooling tower?
What is the primary function of the drift eliminators in the E-300 cooling tower?
The cooling tower uses a Hudson TUF-LITE multi-blade fan. What type of drive connects the fan to the motor?
The cooling tower uses a Hudson TUF-LITE multi-blade fan. What type of drive connects the fan to the motor?
The E-300 Cooling Tower fan is driven by a TechTop electric motor.
The E-300 Cooling Tower fan is driven by a TechTop electric motor.
What type of material is used in the construction of the E-300 cooling tower to enhance durability and reduce maintenance?
What type of material is used in the construction of the E-300 cooling tower to enhance durability and reduce maintenance?
The cooling tower cell is designed for a flow rate of 40 gpm.
The cooling tower cell is designed for a flow rate of 40 gpm.
What should the operator do if the recorded pump discharge pressure is below 40 psig?
What should the operator do if the recorded pump discharge pressure is below 40 psig?
The cooling water pump discharge is equipped with local pressure indicators.
The cooling water pump discharge is equipped with local pressure indicators.
Which component is used to prevent water surges in the cooling tower cell?
Which component is used to prevent water surges in the cooling tower cell?
Which indicator confirms that the cooling tower fan has successfully started?
Which indicator confirms that the cooling tower fan has successfully started?
The E-300 Cooling Tower features a large orifice, high-pressure down spray nozzles.
The E-300 Cooling Tower features a large orifice, high-pressure down spray nozzles.
What is the first step when starting Pump P-301 A/B according to the startup procedure?
What is the first step when starting Pump P-301 A/B according to the startup procedure?
What type of fill media is used in the cooling tower for efficient heat transfer?
What type of fill media is used in the cooling tower for efficient heat transfer?
What is the power rating of the cooling tower fan motor?
What is the power rating of the cooling tower fan motor?
The lubricant recommended for the gear drive in the cooling tower is Mobilgear 680.
The lubricant recommended for the gear drive in the cooling tower is Mobilgear 680.
During the startup procedure, which of the following should be checked if no water is seen spraying from the nozzles?
During the startup procedure, which of the following should be checked if no water is seen spraying from the nozzles?
Emulsified water is always present in the lubricant used for the gear drive connecting the motor and the fan.
Emulsified water is always present in the lubricant used for the gear drive connecting the motor and the fan.
The cooling tower basin is designed to support the cooling tower but does not provide water storage capacity.
The cooling tower basin is designed to support the cooling tower but does not provide water storage capacity.
What is the rated flow rate of the E-300 cooling tower?
What is the rated flow rate of the E-300 cooling tower?
The cooling tower lubrication chart recommends using gear oils in accordance with AGMA, Standard 9005-D94.
The cooling tower lubrication chart recommends using gear oils in accordance with AGMA, Standard 9005-D94.
The fill media in the ICT Counter-flow cooling tower is UV stabilized PVC sheets.
The fill media in the ICT Counter-flow cooling tower is UV stabilized PVC sheets.
If the pump discharge pressure is greater than 53 psig during troubleshooting, what is the likely issue?
If the pump discharge pressure is greater than 53 psig during troubleshooting, what is the likely issue?
Flashcards
Capital of France (example flashcard)
Capital of France (example flashcard)
Paris
