18 Questions
In the given text, what is emphasized for line work and cleanliness?
Retaining all construction lines and nomenclature
What does the instruction mention about illustrating answers?
Drawing neat sketches wherever necessary
What does the text indicate should be done with figures that are to the right?
Indicating full marks
Which aspect is highlighted when welding two rectangular plates with a convex double V butt weld?
Thickness and length of the plates
What is instructed regarding finding the maximum and minimum sizes of the shaft and hole?
Referring to Table-I
What is advised about using construction lines in the drawing?
Retaining all construction lines and nomenclature
In the given scenario, what is the shape of the solid that is being penetrated by a cylinder?
Prism
What is the diameter of the cylinder that penetrates the solid in the scenario?
40mm
For the second penetration scenario, what is the shape of the vertical square prism being penetrated?
Cuboid
How far apart are the axes of the horizontal and vertical prisms in the second scenario?
6mm
In the third scenario, what is the shape of the vertical prism being penetrated by the horizontal cylinder?
Cuboid
What is the diameter of the horizontal cylinder in the third scenario?
40mm
What is the purpose of drawing the shortest path on the projections of a cone as described in the text?
To show the development of the lateral surface
In the assembly of a universal coupling, what is the purpose of drawing sectional front view and top view of the fork?
To represent the external appearance and dimensions of the fork
What is the significance of drawing two views each of shaft, collar, and key in an engineering drawing?
To represent their exact shape and size
How does drawing a half-top view of an assembly, as mentioned in Fig-6, contribute to understanding non-return valve details?
To show internal mechanisms clearly
When preparing a bill of materials from a given tolerance chart, what information does it primarily provide?
Dimensions and quantities of required parts
"Drawing sectional front view and top view" is important in engineering drawings mainly for:
Representing true shapes and sizes.
This sample test paper for Diploma in Mechanical Engineering covers drawing lines that intersect at right angles, with a focus on illustrating the lines of intersection. The test includes instructions for neat sketches where necessary.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free