Lesson 1: Preparing Cut Parts of Garments

Pinning cut parts is not necessary in garment construction.

It is recommended to lift the fabric from the table while pinning cut parts.

Labeling the units of cut parts is not important when preparing them for sewing.

Pressing the fabric is not essential in maintaining the shape of the garment during construction.

Ironing can be used interchangeably with pressing when it comes to garment construction.

Ironing and pressing should always be done in the same direction as the fabric grain.

Pressing directly on the zipper is recommended in the pressing techniques section.

It is advised to press over pins to secure the fabric in place during pressing.

Wool fabric should be pressed until completely dry to avoid wrinkles.

Using moisture is unnecessary when testing a scrap of fabric for pressing.