Electrical Safety of Medical Equipment: Introduction
10 Questions
2 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Isolated power systems employ ______ to provide a warning in the event of a situation.

line isolation monitors

The degree of isolation is expressed as the ______ current or faulty hazard current.

risk

A ______ lamp is labeled “SAFE” if the system is adequately isolated.

green

A ______ lamp is labeled “HAZARD” if a short occurs between one of the wires.

<p>red</p> Signup and view all the answers

An ______ alarm will begin to sound when the system has lost its protective properties.

<p>acoustical</p> Signup and view all the answers

Receptacles powered from an isolated system are not always the common ______-prong type.

<p>three</p> Signup and view all the answers

A special ______ system is required for all anesthetizing locations.

<p>grounding</p> Signup and view all the answers

The hazard alarm merely indicates that the system has lost its ______ properties.

<p>protective</p> Signup and view all the answers

The device alternately checks the two wires of the distribution system for ______ from ground.

<p>isolation</p> Signup and view all the answers

Isolated power systems are used to prevent ______ in the event of a situation.

<p>accidents</p> Signup and view all the answers

More Like This

Laboratory Safety and Equipment
30 questions

Laboratory Safety and Equipment

EnergySavingPointillism avatar
EnergySavingPointillism
Medical Device Maintenance and Inspection
15 questions
Use Quizgecko on...
Browser
Browser