Electric Traction Training and Competency

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the role of an 'authorized person' in the context of railway operations?

To perform specific duties as authorized by competent authority (correct)

To conduct training sessions for staff

To patrol the railway lines for safety

To operate the trains under all conditions

Which certificate is issued to a Khalasi in the OHE section?

TR-2 by AEE(TRD) after written test

TR-4 by DEE(TrD) after written and oral test

TR-1 by ATFO or CTFO after oral test (correct)

TR-3 by DEE(TRD) after written test

What does the TR-8 certificate signify?

Issued to Khalasi after oral test

For Skilled Staff, issued by AEE(TrD) (correct)

Issued to Supervisors after practical test

For OHE Inspection Car Drivers after written test

Which category of staff requires a TR-6 certificate?

Supervisor in B.PSI section after written and oral test Signup and view all the answers

What is required for a person to be in charge of motor trolleys?

Qualification in accordance with GR and SR Signup and view all the answers

Which of the following certifications requires both written and oral tests?

TR-3 Signup and view all the answers

What does certification indicate about the staff?

They have undergone training and examinations Signup and view all the answers

What is the primary focus of the theoretical training in the OHE Linesman course?

Basic principles of electricity and power supply arrangements Signup and view all the answers

Which of the following tasks is included in the practical training for OHE Linesman?

Climbing masts and practicing the correct use of tools Signup and view all the answers

What type of safety protocol is emphasized in the OHE Linesman training?

Safety rules for OHE work, including power blocks Signup and view all the answers

In the context of OHE maintenance, what is a key focus during patrolling and inspection?

Looking for common OHE defects Signup and view all the answers

What type of components does the OHE training cover in terms of installation and assembly?

Various fittings such as insulators and clamps Signup and view all the answers

What is a prerequisite for the efficient operation and maintenance of electric traction equipment?

Intimate knowledge of construction details Signup and view all the answers

Which category of staff is NOT listed as requiring special training in electric traction?

Engineers specialized in electric motors Signup and view all the answers

What is a critical task for the open line administration before commissioning electric traction?

Planning recruitment and training of staff Signup and view all the answers

Which type of training is necessary for staff before they are assigned to working posts?

Initial training in a training school Signup and view all the answers

Who can approve the necessity for initial training provided to other staff categories?

Chief Electrical Engineer Signup and view all the answers

What should be ready before electric traction is commissioned on any section?

Well-trained operating staff Signup and view all the answers

Which of the following groups is specifically mentioned as needing initial training?

Traction Power Controllers Signup and view all the answers

What type of courses do artisans and supervisory staff need to undergo periodically?

Refresher Courses Signup and view all the answers

Which of the following categories is NOT explicitly mentioned as needing training before posting?

Mechanical Engineers Signup and view all the answers

What is the initial training period for Directly recruited supervisors in OHE?

12 months Signup and view all the answers

How long is the initial training for skilled artisans who are direct recruits?

60 weeks Signup and view all the answers

Which category has the longest initial training duration?

TPCs/ATPCS Signup and view all the answers

What must an employee do before being promoted?

Pass the trade test or prescribed departmental test Signup and view all the answers

What type of training should precede the departmental tests for promotion?

Training to enable discharge of responsibilities in the higher post Signup and view all the answers

What is the practical training for artisans aimed to help them understand?

Skilled work covered by specific technical documents Signup and view all the answers

Which group of workers has a 30-week initial training duration for maintenance?

Workers from Diesel/Steam services Signup and view all the answers

What aspect of training must be particularly considered for older employees?

Their theoretical knowledge due to educational background Signup and view all the answers

For promotion, what aspect of training usually has a reduced duration?

Theoretical training Signup and view all the answers

How should the courses of training for OHE, PSI, and RC be structured?

Carefully planned and implemented Signup and view all the answers

What is one of the primary purposes of refresher courses for staff?

To reinforce and update the knowledge of the staff Signup and view all the answers

Who is responsible for deciding the categories of staff that require refresher courses?

The General Manager Signup and view all the answers

How long is the typical duration of refresher courses for Artisan Staff?

2 weeks Signup and view all the answers

For staff likely to undergo inter-divisional transfers, where should the programming of refresher courses be arranged?

By the headquarters office Signup and view all the answers

What type of staff must undergo refresher courses according to the extant instructions?

Those dealing with train operation safety and in contact with the public Signup and view all the answers

What aspect should refresher courses for operating staff particularly emphasize?

Trouble shooting procedures for various types of equipment Signup and view all the answers

What is a recommended method to ensure training is retained during refresher courses?

Involving actual drilling and repetition of exercises Signup and view all the answers

Which of the following is NOT listed as a category of staff requiring refresher courses?

Senior Administrative Officers Signup and view all the answers

How is the duration of the refresher course decided for different categories of staff?

By CEE to suit local conditions Signup and view all the answers

What effect do refresher courses have on staff morale?

They end frustration and boost morale. Signup and view all the answers

Which of the following certificates can a Linesman in the OHE section receive?

TR-2 Signup and view all the answers

What is the category of certificate issued to Supervisors for Protective Relays and Instruments?

TR-7 Signup and view all the answers

Which category of staff is required to pass both a written and oral test to obtain their competency certificate?

Supervisor Signup and view all the answers

Who issues the TR-9 certificate to Supervisors in the Remote Control category?

DEE(TRD) Signup and view all the answers

What does the TR-8 certificate signify for Skilled Staff?

Certification for Remote Control duties Signup and view all the answers

What is a requirement for officers in charge of Motor Trolleys in electrified sections?

Qualification as an Authorized Person Signup and view all the answers

Which of the following staff categories does NOT require obtaining a competency certificate?

General Maintenance Crew Signup and view all the answers

Which of the following responsibilities is NOT authorized for a Fitter who holds Certificate of Competency No.TR-5?

Issuing permits-to-work for maintenance activities Signup and view all the answers

What step must occur before the Driving Inspector countersigns the employee's declaration for certification?

An oral examination of the employee for knowledge of the road Signup and view all the answers

Which of the following is included in the responsibilities for staff authorized under the TR-6 certificate?

Conducting routine checks of traction power installations Signup and view all the answers

Under what conditions can an employee effect shut down on 25 kV equipment as per Certificate of Competency No.TR-5?

Under explicit instructions from the TPC Signup and view all the answers

Which certificate provides authorization specifically for supervisors of PSI tasks?

Certificate of Competency No.TR-6 Signup and view all the answers

What is the initial training duration for skilled artisans who are absorbed from Diesel or Steam general services?

30 weeks Signup and view all the answers

Which group of employees is required to undergo a trade test before promotion?

Promoted employees Signup and view all the answers

What is a crucial aspect of practical training for artisan staff?

Performing independently skilled work Signup and view all the answers

What can affect the duration of training for employees being promoted?

Their age and experience Signup and view all the answers

In regard to what must particular attention be paid during the promotion training of older employees?

Their capacity to pass theoretical assessments Signup and view all the answers

What is the required initial training period for directly recruited supervisors in Remote Control?

12 months Signup and view all the answers

Which aspect of training is specifically emphasized for the skilled workers during their practical training?

Understanding of technical charts Signup and view all the answers

What should the training for promotional courses aim to achieve before the departmental tests?

Enable responsibility in the higher post Signup and view all the answers

How long is the initial training period for TPCs/ATPCS?

18 months Signup and view all the answers

What specific authority is granted to the holder of Certificate No.TR-3?

Issue permits-to-work Signup and view all the answers

Which of the following tasks is the OHE Linesman NOT authorized to perform according to Certificate No.TR-2?

Bring into operation new installations Signup and view all the answers

What must a fresh certificate be issued for when transferring to a new section?

Explanation of safety rules for the new section Signup and view all the answers

Which statement accurately describes the limitations of the OHE Linesman's authority?

He cannot issue permits for any maintenance work. Signup and view all the answers

What is a key responsibility of the holder of Certificate No.TR-4?

Drive an OHE Inspection Car Signup and view all the answers

What distinguishes the role of an OHE Supervisor from that of an OHE Linesman?

Issuing permits-to-work Signup and view all the answers

Which of the following certificates allows for the operation of new installations after inspection?

TR-3 Signup and view all the answers

Which duty is NOT specifically mentioned for the OHE Supervisor?

Drive OHE Inspection Cars Signup and view all the answers

What is required before a person is authorized to work as a Linemen grade according to Certificate No.TR-2?

Undergo a safety briefing for the new section Signup and view all the answers

Which action is exclusively reserved for the authority of the OHE Supervisor?

Authorize new installations Signup and view all the answers

What should be maintained for every trainee during their training process?

A record of progress achieved and training period Signup and view all the answers

What is a critical aspect of the training process for the officers in charge of operations and maintenance?

Monitoring trainees and guiding their progress Signup and view all the answers

In specialized training, what is one reason staff may be deputed to work with Contractor's staff?

To become proficient in various operations Signup and view all the answers

What is the nature of the examination that trainees must pass at the end of their training?

A practical examination with a focus on real-world skills Signup and view all the answers

What can CEE authorize if training cannot be conveniently arranged in Zonal Schools?

Inclusion of training in TrD Training Schools Signup and view all the answers

Which factor is essential for the efficiency of both operation and maintenance of electric traction equipment?

Hands-on experience with new technologies Signup and view all the answers

What is the primary focus in the practical training provided to artisans?

Understanding operational procedures and safety protocols Signup and view all the answers

What task is emphasized for supervisors during the training of their personnel?

Taking personal interest in guiding trainees Signup and view all the answers

What aspect does the syllabus for OHE Linesman include?

Operational procedures for electric systems Signup and view all the answers

What clause is typically included in contracts for electric traction equipment?

Involvement of staff during the production stage for practical training Signup and view all the answers

Study Notes

Training and Competency Certificates

Electric traction is a specialized field requiring staff with intimate knowledge of equipment construction, adjustments, and operation
Thorough knowledge of safety rules and procedures is essential for equipment and personnel safety
Specialized training is required for all staff categories before operation or maintenance responsibilities
Staff planning for electric traction commissioning requires adequate operating, maintenance, and running staff in advance
Training schools with qualified instructors should be established

Categories of Staff to be Trained

Degree and Diploma holders are directly recruited as Supervisors
Apprentice Mechanics can be absorbed as Supervisors
Trade Apprentices can be absorbed as skilled artisans
Artisans and supervisors should undergo refresher courses

Initial Training

Staff categories need initial training at a training school before working posts
Categories include directly recruited supervisors, Traction Power Controllers (and assistants), skilled and semi-skilled maintenance staff for OHE, PSI, and RC equipment, and any other group approved by CEE
Specific initial training periods exist for some categories but can be modified by CEE based on local requirements

Refresher Courses

Refresher courses are mandatory for staff dealing with train safety or public contact
Training will update knowledge of rules, procedures and latest systems
Illustrations of typical staff include Traction Power Controllers, assistants, OHE supervisors, and OHE car drivers
Duration of refresher courses is based on local needs but examples include 3 weeks for supervisors and 2 weeks for artisans

Training Facilities

All India training facilities are available for Electrical Department staff
Separate training schools for staff working with overhead equipment (OHE) exist, offering specialized training
Training includes safely operating height-related OHE equipment and its repair, using safety equipment, and essential procedures
Standardized equipment (tools, models, diagrams) is available for practical instruction

Authorized Persons and Competency Certificates

An "authorized person" is someone duly authorized by a competent authority
Each authorized person is given a Competency Certificate outlining their authorized work after training, examination, and assessment
Certificate categories exist for many staff positions, specifying the type of work
The issuance of each certificate is assigned to a particular official
Specific training and examination is required for OHE Inspection Car Drivers and before they are authorized to work independently
Competency certificates must be recorded; personnel undergo medical examinations

Knowledge of Rules

Trainees need to demonstrate full understanding of safety rules
Relevant chapters of manuals provide supplementary information
Competency Certificate issuance and records must reflect safety awareness and adherence to regulations
Continuous checking of understanding and practice is essential
Inspections are performed to monitor competency and compliance with safety procedures

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

This quiz covers essential aspects of training and competency certificates required for electric traction staff. Participants will explore the importance of safety knowledge, specialized training, and the categorization of staff that needs training. Understanding the roles of different staff categories and the training processes is key for operational success.