Duty Scheduling Protocols

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the latest time a member affected by manpower changes will be notified?

By 1100 hours (correct)

By 1200 hours

By 1800 hours

By 1600 hours

What is required for Emergency Trades to be validated?

Completion of Form 2 (correct)

Notification via email only

Entry into TeleStaff two days prior

Approval from the Battalion Chief

By what time should members be placed in their tactical positions for the next day?

By 0800 hours

By 1600 hours

By 0900 hours

By 1100 hours (correct)

What should be done if the current day’s roster is not properly staffed?

Contact the Battalion Chief Signup and view all the answers

What is the responsibility of a member noted for a discrepancy?

Notify through the appropriate chain of command Signup and view all the answers

What action should be taken if a change to TeleStaff is required after check-in?

Notify the Battalion Chief immediately Signup and view all the answers

What does a Red or Yellow Alarm Bell symbol indicate?

Potential staffing issues Signup and view all the answers

When should a Battalion Chief on Platoon Duty review the Battalion Manpower?

No later than 0745 hours Signup and view all the answers

What should the Captain do if a detailed member has the same last name as a member in their company and they are related?

Inform the District Chief for an exchange of the detailed member Signup and view all the answers

Which of the following is NOT a responsibility of the Captain?

Conducting detailed physical fitness tests Signup and view all the answers

How many days off do 40-hour employees receive for a death in the immediate family?

Three days Signup and view all the answers

Which responsibility requires a check at four specific times during the day?

0830, 1630, 2200, 0230 check Signup and view all the answers

Which item is included in the responsibilities of the Captain regarding company administration?

House Operational Policy Signup and view all the answers

Which family member is NOT included in the immediate family for bereavement leave?

Cousins Signup and view all the answers

What is the time frame in which bereavement leave must be taken following the death of an immediate family member?

Within 6 months Signup and view all the answers

Which of the following responsibilities is associated with maintaining a roster of extra drivers?

Evaluate subordinates assigned Signup and view all the answers

Why is it important not to wear wristlets while driving with bunkers?

They can impede the ability to steer effectively. Signup and view all the answers

What is the primary responsibility of an incident commander regarding rehab operations?

To establish rehab when warranted by conditions. Signup and view all the answers

What should be done to gear that is deemed unserviceable?

Notify the Deputy of Logistics for potential condemnation. Signup and view all the answers

How should the name be marked on the gear, according to guidelines?

Permanent marker using 1-inch letters. Signup and view all the answers

When is routine gear inspection documented?

Every Tuesday by an officer. Signup and view all the answers

What must a firefighter do upon noticing a tear in their bunker coat?

Notify the district through proper channels. Signup and view all the answers

What is the required action if a firefighter changes their last name?

File a Form 2 to request a name change on gear. Signup and view all the answers

What actions are to be taken before leaving quarters for an operation?

Gear should be donned before any movement. Signup and view all the answers

What is the maximum effective work time of a CBRN canister?

8 hours Signup and view all the answers

Where should flammable liquids not be stored in relation to the cabinet?

Within 10 feet of the cabinet Signup and view all the answers

How many Bullard TXS thermal imagers are issued to squads?

3 per squad Signup and view all the answers

What percentage of oxygen must be present in the air for safe operation?

19.5% Signup and view all the answers

What is the required action after using the Bullard TXS thermal imager?

Replace its battery Signup and view all the answers

What is the purpose of the Speed Swivel in firefighting equipment?

To serve as a backup connection if the FDC is missing Signup and view all the answers

Who is responsible for fulfilling the PCR on ALS fire companies?

The Firefighter/Paramedic Manager Signup and view all the answers

In case of damage or deficiency in equipment, whom should be notified?

BAS Signup and view all the answers

How often should the members drill on the use and operation of the APR?

Every Saturday Signup and view all the answers

What must be done with the M18 Transfer Pump when operating?

Ensure water is removed from the barrel at least 48 inches below grade Signup and view all the answers

Which device requires daily battery replacement?

Bullard TXS Thermal Imager Signup and view all the answers

What is the primary responsibility of the Battalion Chief regarding the Speed Swivel?

To ensure it is available for use and properly maintained Signup and view all the answers

If a member cannot attach AED leads due to obvious traumatic death, what should they do?

Contact Med Control and document the situation Signup and view all the answers

How should Electronic Patient Care Reports be initiated?

By the First Arriving Company Signup and view all the answers

What is true regarding the storage of the M18 Transfer Pump?

Only Engine Companies will issue it for use Signup and view all the answers

What should members do if the CBRN canister is exposed to liquid CBRN agents?

Limit usage to 2 hours Signup and view all the answers

Study Notes

Member Responsibilities and Notifications

Members must remain informed of scheduled assignments and changes.
Notification for manpower changes after 1100 hours is the responsibility of Battalion Chief, DDC, Manpower, or Timekeeper.
Off-duty members receive updates via recorded phone numbers and city email.
Discrepancies should be reported through the appropriate chain of command.
Timely swipe is crucial for ensuring members get paid accurately.

Trading and Staffing Protocols

Members must enter trade requests in TeleStaff 5 days in advance.
Emergency trades require Form 2 for approval.
Officers on Platoon Duty must complete check-in by 0815 and apply driver pay accordingly.
Staffing changes post-check-in must be communicated to the Battalion Chief.
Members should be placed in tactical positions for the next day by 1100 hours.

Gear Management and Safety

No bunkers or boots are allowed at water incidents; PFD must go under the coat.
Gear should be donned before leaving quarters to ensure safety and readiness.

Inspections and Equipment Care

Daily inspections of gear are mandatory; any issues must be reported through official channels.
Specific instructions on cleaning gear to avoid damage and maintain integrity must be followed.
Mark gear with 1-inch letters; no embroidery allowed.

Responsibilities of Commanding Officers

In absence of Engine Officer, the Captain assumes responsibilities including inventory and supply management.
Captain has oversight of monthly requests and evaluations within the company.
Plans Chief and Lobby Command Chief may operate without PPE but must carry it for potential reassignment.

Policies on Family Members and Leave

Family members cannot work in the same company or firehouse.
Bereavement leave policy extends 3 days for 40-hour employees and one shift day for platoon staff, valid within 6 months of death.

Equipment Specific Policies

Sonim XP3plus functions as a telemetry phone, documented in EMS Inventory.
Bullard TXS Thermal Imager: Trucks and aerial towers issued one, while squads receive three; daily battery replacements required.
XSlate L10 Tablet responsibilities involve PCR completions and accuracy checks by company officers.

Pumps and Safety Measures

M18 Transfer Pump can move water at a rate of 480 gallons per hour, used for hydrant guzzling.
CBRN canisters provide limited protection against hazardous agents for a maximum of 8 hours of use.
Speed Swivel is utilized when FDC’s female connection is missing; Chief responsible for its care and daily inventory.

Protocols for Resuscitative Measures

In BLS situations, request ALS support, and utilize AED as per SOP until ALS arrives.
ALS may need to document without leads if patient shows signs of traumatic death.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

This quiz covers the protocols and responsibilities related to duty scheduling and manpower notifications. Members must stay informed about assignments and changes, particularly after 1100 hours. Understanding these procedures is essential for effective communication within the organization.