D1Q Subcommittee Inspection Quiz
101 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is covered under the general requirements according to the content?

  • Scope (correct)
  • Advanced welding techniques
  • Types of welding
  • Environmental considerations

    • Which section outlines safety precautions?

  • 1.3 Safety Precautions (correct)
  • 1.7 Mandatory and Nonmandatory Provisions
  • 1.4 Limitations
  • 1.5 Responsibilities

    • What is outlined in section 1.7?

  • Mandatory and Nonmandatory Provisions (correct)
  • Welding symbols
  • Approval
  • General requirements

    • What does the term 'Approval' refer to in the context provided?

    <p>Consent for welding processes</p> Signup and view all the answers

    Which of the following is NOT mentioned in the general requirements?

    <p>Welding performance qualifications</p> Signup and view all the answers

    Who serves as the Chair of the D1Q Subcommittee Task Group on Inspection?

    <p>P.G.Kinney</p> Signup and view all the answers

    Which of the following individuals is affiliated with Sandia National Laboratories?

    <p>P.G.Kinney</p> Signup and view all the answers

    Which of these individuals is a Vice Chair of the D1Q Subcommittee Task Group on Inspection?

    <p>M.E.Gase</p> Signup and view all the answers

    Identify the individual who retired from Kiewit Corporation.

    <p>J.A.Cochran</p> Signup and view all the answers

    Which organization is D.L.McQuaid associated with?

    <p>D.L.McQuaid &amp; Associates, Incorporated</p> Signup and view all the answers

    Who holds the position of Consultant within the group?

    <p>K.K.Verma</p> Signup and view all the answers

    Which member is affiliated with HRV Conformance Verification Associates, Incorporated?

    <p>H.E.Gilmer</p> Signup and view all the answers

    What position does J.J.Kinsey hold?

    <p>Vice Chair</p> Signup and view all the answers

    Who serves as the Co-Chair for the D1Q Subcommittee Task Group on Design?

    <p>D.K.Miller</p> Signup and view all the answers

    Which company is associated with J.A.Packer?

    <p>University of Toronto</p> Signup and view all the answers

    Which role does C.Zanfir hold in the D1Q Subcommittee Task Group on Prequalification?

    <p>Chair</p> Signup and view all the answers

    Who is the Vice Chair listed for the D1Q Subcommittee Task Group on Design?

    <p>T.Green</p> Signup and view all the answers

    Which individual is listed as an advisor to the D1Q Subcommittee Task Group on Design?

    <p>B.Capers</p> Signup and view all the answers

    Which company is associated with T.J.Schlafly?

    <p>American Institute of Steel Construction</p> Signup and view all the answers

    What is the primary focus of the D1Q Subcommittee Task Group on Prequalification?

    <p>Welding certification</p> Signup and view all the answers

    Which of the following is the Vice Chair of the D1Q Subcommittee Task Group on Prequalification?

    <p>L.M.Bower</p> Signup and view all the answers

    What was introduced in Clause 2 of the D1.1/D1.1M:2020 edition?

    <p>New normative references</p> Signup and view all the answers

    Which clause contains the requirements for the qualification of WPSs using waveform technology?

    <p>Clause 6</p> Signup and view all the answers

    What major change was made to Clause 5 in the D1.1/D1.1M:2020 edition?

    <p>Reorganized to list WPS essential variables</p> Signup and view all the answers

    Which table added additional requirements related to shielding gases?

    <p>Table 5.7</p> Signup and view all the answers

    What was done regarding CVN testing requirements in the D1.1/D1.1M:2020 edition?

    <p>All CVN testing requirements were compiled into Table 6.7</p> Signup and view all the answers

    What does the PJP Groove weld clause specifically clarify?

    <p>Qualification of PJP Groove welds</p> Signup and view all the answers

    How has Clause 1 been modified in the D1.1/D1.1M:2020 edition?

    <p>It remains unchanged from previous editions</p> Signup and view all the answers

    What was the previous designation of Clause 6 in the earlier edition?

    <p>Clause 4</p> Signup and view all the answers

    What test is used for T-, Y-, and K-connections on pipes or box tubing with an outer diameter of less than 4 inches?

    <p>Test Joint without Backing</p> Signup and view all the answers

    Which section addresses the location of test specimens on welded test pipe and box tubing?

    <p>Section 10.23</p> Signup and view all the answers

    In the context of weld qualifications, what do Class R indications refer to?

    <p>Specific types of weld defects</p> Signup and view all the answers

    What does the Critical Cooling Rate for 350 HV and 400 HV refer to?

    <p>The cooling rates required to achieve desired hardness levels</p> Signup and view all the answers

    What is the significance of the Temperature-Moisture Content Chart used for low-hydrogen SMAW electrodes?

    <p>It helps assess the atmospheric exposure time.</p> Signup and view all the answers

    Which section discusses scanning techniques used in weld inspection?

    <p>Section 10.30</p> Signup and view all the answers

    Which section of the document outlines the graphs related to cooling rates for single-pass SAW fillet welds?

    <p>Section B.3</p> Signup and view all the answers

    What is the minimum number of exposures required for double-wall exposure in an elliptical view?

    <p>Two exposures</p> Signup and view all the answers

    What section covers the requirements for Welding Procedure Specifications (WPS) qualification?

    <p>10.13</p> Signup and view all the answers

    Which of the following is included in the general requirements for stud welding?

    <p>Production control methods</p> Signup and view all the answers

    What is the focus of section 10.21?

    <p>Testing methods for welder qualification</p> Signup and view all the answers

    Which type of weld is primarily discussed in section 10.19?

    <p>PJP Groove Welds</p> Signup and view all the answers

    What is the purpose of section 10.22?

    <p>Defining tolerance for joint dimensions</p> Signup and view all the answers

    Which section covers non-destructive testing (NDT) requirements?

    <p>10.25</p> Signup and view all the answers

    What are the limitations discussed in section 10.7?

    <p>Material limitations</p> Signup and view all the answers

    Which section describes the identification and parts of tubular connections?

    <p>10.3</p> Signup and view all the answers

    In which part of the document are welder performance qualifications discussed?

    <p>Part D</p> Signup and view all the answers

    What should be considered when determining weld design according to section 10.5?

    <p>Material thickness and type</p> Signup and view all the answers

    What is covered under the scope of tubular structures in section 10.1?

    <p>Design and fabrication methods</p> Signup and view all the answers

    What does section 10.12 address regarding welding personnel?

    <p>Performance qualification requirements</p> Signup and view all the answers

    Which section includes requirements for visual inspection?

    <p>10.24</p> Signup and view all the answers

    What is primarily outlined in section 10.18?

    <p>CJP Groove Welds for Tubular Connections</p> Signup and view all the answers

    What does the term 'fillet weld' generally refer to in the context of section 10?

    <p>Weld type for T-, Y-, or K-connections</p> Signup and view all the answers

    What is one of the purposes of the section discussing safety precautions?

    <p>To ensure a safe working environment during welding</p> Signup and view all the answers

    Which of the following is a requirement established in the section on responsibilities?

    <p>Ensuring proper training and supervision of welders</p> Signup and view all the answers

    What is one of the functions of the section on mandatory and nonmandatory provisions?

    <p>To differentiate compliance requirements for various projects</p> Signup and view all the answers

    What type of information is primarily contained within the terms and definitions section?

    <p>Standard definitions used throughout the document</p> Signup and view all the answers

    The scope section outlines the extent of which topics?

    <p>General requirements related to welding specifications</p> Signup and view all the answers

    What is the focus of section 10.23 regarding test specimens?

    <p>Locations of test specimens on welded test pipe and box tubing</p> Signup and view all the answers

    Which section addresses the requirements for corner macroetch test joints?

    <p>10.22</p> Signup and view all the answers

    What does the section on Class X indications generally cover?

    <p>Acceptable forms of welding defects</p> Signup and view all the answers

    Which section discusses the procedure for determining extended atmospheric exposure time for low-hydrogen SMAW electrodes?

    <p>D.2</p> Signup and view all the answers

    Which document section outlines scanning techniques used in weld inspection?

    <p>10.30</p> Signup and view all the answers

    What is the main purpose of section D.1?

    <p>To chart temperature-moisture content for low-hydrogen SMAW electrodes</p> Signup and view all the answers

    What is included in section 10.29 regarding double-wall exposure?

    <p>Minimum three exposures for double-wall view</p> Signup and view all the answers

    What is AWS's stance on the accuracy of information contained in its standards?

    <p>AWS does not test or verify the accuracy of the information in its standards.</p> Signup and view all the answers

    What responsibilities does AWS undertake in relation to liability for standards usage?

    <p>AWS does not accept any liability for damages resulting from reliance on its standards.</p> Signup and view all the answers

    How does AWS recommend users handle the application of its standards?

    <p>Users should utilize their independent judgment and seek professional advice as necessary.</p> Signup and view all the answers

    What must be established before using AWS standards, according to the content?

    <p>Personnel should be appropriately qualified and competent.</p> Signup and view all the answers

    Which of the following statements is true regarding publication of AWS standards?

    <p>AWS does not authorize infringement of any patents or trade names through publication.</p> Signup and view all the answers

    In what manner does AWS address the evolution of its standards over time?

    <p>New editions may supersede or correct existing standards through various publications.</p> Signup and view all the answers

    How can users obtain official interpretations of the technical requirements in AWS standards?

    <p>By submitting a written request to the appropriate technical committee.</p> Signup and view all the answers

    Which of the following statements reflects AWS's role in the standards development process?

    <p>AWS facilitates a consensus-based process without testing or verifying the standards.</p> Signup and view all the answers

    Who is the Chair of the D1Q Subcommittee Task Group on Qualification?

    <p>T.C. Myers</p> Signup and view all the answers

    Which company is associated with the Vice Chair of the D1Q Subcommittee Task Group on Qualification?

    <p>CB&amp;I Power</p> Signup and view all the answers

    Which individual is a member of the D1Q Subcommittee Task Group on Prequalification?

    <p>P. Torchio, III</p> Signup and view all the answers

    Which role does M.Bernasek hold in the D1Q Subcommittee Task Group?

    <p>Member</p> Signup and view all the answers

    Which individual is noted as working with Shell International E & P?

    <p>J.J. Kenney</p> Signup and view all the answers

    Which company does D.W. Meyer represent within the group?

    <p>ESAB Welding &amp; Cutting Products</p> Signup and view all the answers

    Which of the following individuals is associated with a retired status?

    <p>J.H. Kiefer</p> Signup and view all the answers

    Who is affiliated with Accurate Weldment Testing, LLC?

    <p>T.R. Blissett</p> Signup and view all the answers

    Which year marked the first publication of the Code for Fusion Welding and Gas Cutting in Building Construction?

    <p>1928</p> Signup and view all the answers

    What notable change occurred in the D1.1 code in 1988?

    <p>References changed to statically loaded and dynamically loaded structures.</p> Signup and view all the answers

    What is indicated by underlined text in the clauses of the D1.1/D1.1M:2020 edition?

    <p>It identifies a change from the 2015 edition.</p> Signup and view all the answers

    Which revision cycle was adopted after the 2010 edition of the D1.1 code?

    <p>It switched to a five-year revision cycle.</p> Signup and view all the answers

    From which edition did the D1.1 code start including amendments that were published in subsequent years?

    <p>1963</p> Signup and view all the answers

    How many total revisions have been made to the D1.1 code as of the 2020 edition?

    <p>24</p> Signup and view all the answers

    What significant formatting change is noted in the D1.1/D1.1M:2020 edition regarding clause changes?

    <p>A vertical line is now used to indicate changes.</p> Signup and view all the answers

    In which year did the AWS first separate bridge welding from its general structural welding code?

    <p>1988</p> Signup and view all the answers

    What is the primary characteristic of an unreinforced bevel groove weld?

    <p>Does not have any reinforcement to enhance strength</p> Signup and view all the answers

    In which scenario is a maximum fillet weld size critical?

    <p>Along edges in lap joints</p> Signup and view all the answers

    What is a significant factor when transitioning thicknesses in statically loaded nontubular connections?

    <p>Gradual change in weld size</p> Signup and view all the answers

    Which of the following is true regarding transversely loaded fillet welds?

    <p>They are generally weaker than longitudinally loaded welds</p> Signup and view all the answers

    What is the purpose of testing plates in weld qualification?

    <p>To determine the soundness of the welds</p> Signup and view all the answers

    What is significant about the allowable stress range for cyclically applied loads in nontubular connections?

    <p>It is influenced by the weld geometry</p> Signup and view all the answers

    Which type of joint is impacted by the transition of butt joints in parts of unequal thickness?

    <p>Groove joints</p> Signup and view all the answers

    When using a flare bevel groove weld with reinforcing fillet weld, what is essential for the design?

    <p>Reinforcement that matches the base material thickness</p> Signup and view all the answers

    What aids in the characterization of a fillet weld's soundness during qualification tests?

    <p>Standardized testing methods and criteria</p> Signup and view all the answers

    What is a common acceptance criterion for discontinuities in cyclically loaded nontubular connections in tension?

    <p>Allowable levels of porosity</p> Signup and view all the answers

    What condition is crucial when determining the transition of width in cyclically loaded nontubular joints?

    <p>The thickness must not exceed the width</p> Signup and view all the answers

    What is the primary focus when testing welds in T-, Y-, and K-connections?

    <p>Consideration of all types of loads</p> Signup and view all the answers

    What does the term 'plug weld macroetch test plate' refer to?

    <p>A test method assessing weld soundness</p> Signup and view all the answers

    More Like This

    D1Q Subcommittee Task Group Affiliations
    48 questions

    D1Q Subcommittee Task Group Affiliations

    LyricalHeather4427 avatar
    LyricalHeather4427
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser