Podcast
Questions and Answers
What is the correct volume for the sample cups used with transfer calibrators?
What is the correct volume for the sample cups used with transfer calibrators?
Which step must be performed after replenishing CA Clean I?
Which step must be performed after replenishing CA Clean I?
What action should be taken after entering the calibrator value in the Standard Analysis?
What action should be taken after entering the calibrator value in the Standard Analysis?
What is the final step in the calibration process as outlined?
What is the final step in the calibration process as outlined?
Signup and view all the answers
Which of the following is NOT a step in the calibration process?
Which of the following is NOT a step in the calibration process?
Signup and view all the answers
Study Notes
Calibrator Transfer and Calibration Process
- Transfer calibrators to 2 mL or 4 mL sample cups.
- Place cups in a 4 mL sample rack.
- Replenish CA Clean I solution and load fresh, room temperature OVB.
- Change the Test Group to view the test needing calibration.
- Select "Standard Curve" > "Select Test" > "select parameter" > verify lot numbers from the Main Menu.
- Select "Standard Analysis" > enter calibrator value.
- Scan the 2D barcode and press "Register".
- Accept calibration, select "Set", and print the results.
- Perform quality control (QC) checks.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
This quiz covers the step-by-step process for transferring calibrators and performing calibration in a laboratory setting. It includes details on sample cup preparation, standard analysis, and quality control checks to ensure accuracy. Test groups and parameter selections are also addressed to provide a comprehensive understanding of the calibration workflow.
