5S Safety Equipment Identification Quiz

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

What should be done if the equipment has a physical fault, such as an exposed screw head or sharp edge?

  • Leave it as is and continue using it on the floor.
  • Move it to the red tag area for assessment by RME. (correct)
  • Escalate it to your Manager for inspection.
  • Dispose of it immediately in a designated bin.

Where should red tags be located according to the text?

  • In the break room
  • In the cart storage areas (correct)
  • In the supervisor's office
  • In the main entrance

What should be done if there are no red tags or zip ties available at the designated red tag area?

  • Move the equipment to a different area
  • Leave the equipment as it is
  • Create makeshift tags and ties
  • Contact RME or your Manager for assistance (correct)

When should items requiring any repair be moved to one of the main red tag areas?

<p>Before the End of Shift (EOS) (D)</p> Signup and view all the answers

Who will remove the red tag from an item once repairs or modifications have been completed?

<p>The RME technician (B)</p> Signup and view all the answers

What type of equipment is typically red-tagged?

<p>Equipment without a power source (B)</p> Signup and view all the answers

What is the purpose of Lock Out, Tag Out (LOTO) compared to red tagging?

<p>LOTO is for equipment with a power source, while red tagging is for equipment without a power source (A)</p> Signup and view all the answers

Which item is NOT an example provided in the text for red tag supplies?

<p>Blue tag (D)</p> Signup and view all the answers

What is the purpose of floor marking tape (yellow) in the 5S process location?

<p>To designate specific locations in the 5S process (C)</p> Signup and view all the answers

When is Lock Out, Tag Out (LOTO) typically used?

<p>For equipment with a power source before maintenance work starts (A)</p> Signup and view all the answers

What should be done when broken equipment is found?

<p>Take the item(s) to the red tag area in the building (A)</p> Signup and view all the answers

Flashcards are hidden until you start studying

More Like This

Melhoria Contínua e 5S's
10 questions

Melhoria Contínua e 5S's

AutonomousMeitnerium avatar
AutonomousMeitnerium
5S and 5 Why's Analysis Quiz
21 questions
Use Quizgecko on...
Browser
Browser