Residential Design Drawing Standards - PDF

Document Details

AmiableJasper6249

Uploaded by AmiableJasper6249

Tags

architectural design drawing standards residential design building specifications

Summary

This document outlines residential design drawing standards and specifications for Level 1 review. It covers details for walls, doors, windows, cabinetry, and appliances. The standards define dimensions, clearances, line representations and aspects of kitchen design, including the kitchen work triangle.

Full Transcript

RESIDENTIAL DESIGN DRAWING STANDARDS LEVEL 1 REVIEW Walls Drawn at 4” for clarity and readability Actual construction uses 2x4’s for interior, and 2x6’s for exterior and plumbing Align beginning/end on drawing for ease of framing Try to avoid odd-...

RESIDENTIAL DESIGN DRAWING STANDARDS LEVEL 1 REVIEW Walls Drawn at 4” for clarity and readability Actual construction uses 2x4’s for interior, and 2x6’s for exterior and plumbing Align beginning/end on drawing for ease of framing Try to avoid odd-numbered dimensions which creates lumber waste Dimensions assigned as L x W/D (right->left x top->bottom) Extend 4” beyond the end of cabinet faces Doors, Openings, & Clearances Exterior Doors – 3’ Laundry & Kitchen – 3’ to allow for Washer/Dryer and Refrigerator Interior Room Entry – 32”, ADA compliant Closets– varies according to size and use o Walk-in must be ADA compliant o Reach-in use double or bifold doors with minimum 18” panels o Linen – 24” Hallways – 3’ Walkway between cabinets, fixtures, & appliances – 3’ Trim allowance adjacent to walls, cabinets, & fixtures – 3” Windows Single – 3’ Double – 2’-6” each with trim allowance between Trim allowance adjacent to walls, cabinets, & fixtures – 3” Elevations Primary Roof Pitch – 6:12 or 8:12 Roof Overhang/Offset – 1’ Sill Height – 2’ for standard window height @ 5’ Header Height – 7’ for non-standard window heights @ < 5’ Transom Windows – 2’H Doors – 6’-8”H Sidelights on Doors – 1’W Door/Window Trim – 3” Door/Window Mullions – 1” Cabinetry Base – 3’H x 2’D Upper – 42”H x 12”D, mounted @ 18” above base for backsplash, drawn using hidden lines, extend over top of fridge Island – 3’L x 6’W x 3’H, w/12” overhang for bar Countertops 1 ¼” thick and extend 1 ½” beyond cabinet face Fixtures Master Bathroom Shower – 42”L x 42”W x 80”H, Master Bathroom Tub/Shower Insert – 36”L x 72”W x 80”H Master Bathroom Soaking Tub – 3’L x 6’W x 2’H Secondary Bathroom Tub/Shower Insert – 30”L x 60” W x 80”H, dictates minimum room size @ 5’x8’ Master Bathroom Sink – Double @ 6’L Secondary Bathroom/Laundry Room Sink – 30” Kitchen Sink – 30” for single basin, 36” for double basin Toilet – centered between adjacent structures with 30” clearance, private room in Master Bathroom Appliances Washer/Dryer – 32”L x 32”W x 42”H , leave 6” clearance from back wall for hoses and plugs, 2” clearance between appliances and adjacent walls/cabinets/fixtures Dishwasher – 2’L x 2’D x 3’H, drawn using hidden lines, 2” from sink edge Stove – 30”L x 26”D x 36”H Cooktop – 30”L x 22”D Wall Oven – 30”L x 24”D x 28”H, leave 2” clearance from adjacent walls Refrigerator – 36”L x 36”D x 72”H, leave 2” clearance from adjacent walls/cabinets, located at the end of a cabinet run to anchor the beginning/end of the kitchen Microwave – 30”L x 16” D x 17”H range mount, 30”L x 24”D x 17”H wall mount ***Kitchen Work Triangle: location and distance between the stove/cooktop, fridge, and sink should form the smallest possible triangle for efficiency*** Storage Linen Closet – 30”L x 24”D Bedroom Reach-in Closet – 6’L x 2’D (inside) Line Representation Pantry Shelves – 16”D w/solid line Linen Closet Shelves – 12”D w/solid line Bedroom Closet Shelves – 14”D w/hidden line

Use Quizgecko on...
Browser
Browser