General Carpentry L1 6E PPS PDF
Document Details
Uploaded by GraciousGraph4842
Mill Valley Construction Lab
Tags
Summary
This document appears to be a performance profile sheet for a carpentry course, likely part of an NCCER training program. It contains tasks, ratings, and dates. The tasks seem to cover aspects of building materials and methods, and the evaluation structure suggests a practical-based learning type of education, not a traditional examination.
Full Transcript
27101 has no Performance Profile Sheet; no performance testing is required for this module. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27102 Module Title: Building Mater...
27101 has no Performance Profile Sheet; no performance testing is required for this module. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27102 Module Title: Building Materials and Fasteners TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Given a selection of building 2 materials, identify a particular material and describe its use. Calculate building material 2 quantities using the described methods. Demonstrate safe and proper installation of various types of 4 fasteners, anchors, and adhesives. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27113 Module Title: Construction Plans and Documents TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Read and interpret construction 1 plan drawings. 1 Read and interpret schedules. Read and interpret written 3 specifications. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27114 Module Title: Principles of Site and Building Layout TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Demonstrate the ability to use 3 common measuring and leveling tools. Use a water level, builder’s level, laser level, or transit level 3 to determine elevations and angles. Use the 3-4-5 rule or Pythagorean Theorem to verify 4 that intersecting walls are square. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27105 Module Title: Floor Systems TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Estimate the amount of material 3 needed to frame a floor assembly from a set of plans. Lay out and construct a floor 4 assembly, including a rough opening and subfloor material. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27111 Module Title: Wall Systems TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Estimate materials required to 1 frame walls. Lay out a wood frame wall, including plates, corner assemblies, door and 2 window openings, partition Ts, bracing, and fireblocking. Assemble and erect a wood frame wall, including plates, corner 3 assemblies, door and window openings, partition Ts, bracing, and fireblocking. 3 Correctly install sheathing on a wall. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27112 Module Title: Roof Framing TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME 1 Lay out ceiling joists. Estimate the number of ceiling joists 1 required for a building. 3 Lay out common roof rafters. Cut and install roof rafters for a 4 gable roof. 4 Frame a gable endwall. 4 Erect a gable roof using trusses. 4 Sheath a gable roof with an opening. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27110 Module Title: Basic Stair Layout TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Calculate the total rise, number and size of risers, and number 2 and size of treads required for a stairway. 3 Lay out and cut a stringer. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice. Performance Profile Sheet NCCER Training Craft: Carpentry Level 1, 6th Ed. Module: 27109 Module Title: Building Envelope Systems TRAINEE NAME: ________________________________________________________________ TRAINING PROGRAM SPONSOR: ________________________________________________________________ INSTRUCTOR: ________________________________________________________________ Rating Levels: (P) Passed: performed task (F) Failed: did not perform task Be sure to list the date the testing for each task was completed. Recognition: When testing for the NCCER Training Program, record performance testing results and submit them to your Training Program Sponsor through the Registry System. OBJECTIVE TASK RATING DATE START END TIME TIME Prepare a rough opening for 2 proper window installation. Prepare a rough opening for 3 proper door installation. Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided. Signatures: I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator. Candidate/Trainee: _____________________________________ Date: _____________________ Performance Evaluator: _____________________________________ Date: _____________________ 1 Copyright © 2022 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
