Electronic Warfare Fundamentals PDF

ELECTRONIC WARFARE FUNDAMENTALS NOVEMBER 2000 PREFACE Electronic Warfare Fundamentals is a student supplementary text and reference book that provides the foundation for understanding the basic concepts underlying electronic warfare (EW). This text uses a practical building-block approach to facilitate student comprehension of the essential subject matter associated with the combat applications of EW. Since radar and infrared (IR) weapons systems present the greatest threat to air operations on today's battlefield, this text emphasizes radar and IR theory and countermeasures. Although command and control (C2) systems play a vital role in modern warfare, these systems are not a direct threat to the aircrew and hence are not discussed in this book. This text does address the specific types of radar systems most likely to be associated with a modern integrated air defense system (lADS). To introduce the reader to EW, Electronic Warfare Fundamentals begins with a brief history of radar, an overview of radar capabilities, and a brief introduction to the threat systems associated with a typical lADS. The two subsequent chapters introduce the theory and characteristics of radio frequency (RF) energy as it relates to radar operations. These are followed by radar signal characteristics, radar system components, and radar target discrimination capabilities. The book continues with a discussion of antenna types and scans, target tracking, and missile guidance techniques. The next step in the building-block approach is a detailed description of countermeasures designed to defeat radar systems. The text presents the theory and employment considerations for both noise and deception jamming techniques and their impact on radar systems. This is followed by a chapter on decoys, both for defeating an IADS as well as for self-protection. Then, the next chapter discusses chaff characteristics, employment, and impact on specific radar systems. The following two chapters are dedicated to the IR threat. The first covers IR theory, IR target detection and tracking, and advanced IR missile flare rejection techniques. The second chapter presents IR countermeasures to include flare employment, maneuvers, and missile warning equipment. Electronic Warfare Fundamentals then addresses an important aspect of EW, specifically electronic protection (EP). This section includes a description of the most common radar EP techniques designed to counter noise jamming, deception jamming, and chaff employment. The book concludes with an overview of the basic components and limitations of a typical radar warning receiver (RWR), current geolocation techniques, and it finally discusses the basic components of a self-protection jamming system. In addition to the textual material, the book also contains a detailed glossary of EW-related terms and acronyms for quick reference. A list of references is provided to acknowledge the source material used in the preparation of this text. These sources also provide the interested student with a supplementary reading list to learn more about a specific topic. For information or comments on this document, please contact: Det 8, ACC TRSS 4349 Duffer Drive, Ste 437 Nellis AFB NV 89191-7007 DSN: 682-4897 DSN FAX: 682-7391 Comm: (702) 652-4897 Comm FAX: (702) 652-7391 Electronic Warfare Fundamentals Table of Contents TABLE OF CONTENTS CHAPTER 1. INTRODUCTION TO RADAR.............................................................. 1-1 1. INTRODUCTION................................................................................................. 1-1 2. HISTORY............................................................................................................ 1-1 3. TARGET DISCRIMINANTS................................................................................ 1-2 4. INTRODUCTION TO INTEGRATED AIR DEFENSE SYSTEMS (lADS)............ 1-6 5. SUMMARY........................................................................................................ 1-10 CHAPTER 2. CHARACTERISTICS OF RF RADIATION........................................... 2-1 1. INTRODUCTION................................................................................................. 2-1 2. FREQUENCY...................................................................................................... 2-1 3. WAVELENGTH................................................................................................... 2-2 4. POLARIZATION................................................................................................. 2-2 5. DOPPLER EFFECT............................................................................................ 2-5 6. ELECTROMAGNETIC SPECTRUM................................................................... 2-7 7. RF PROPAGATION............................................................................................ 2-9 8. SUMMARY........................................................................................................ 2-14 CHAPTER 3. RADAR SIGNAL CHARACTERISTICS............................................... 3-1 1. INTRODUCTION................................................................................................. 3-1 2. PULSE WIDTH (PW).......................................................................................... 3-1 3. PULSE RECURRENCE TIME (PRT).................................................................. 3-1 4. PULSE REPETITION FREQUENCY (PRF)........................................................ 3-2 5. RADAR RECEIVER CHARACTERISTICS......................................................... 3-3 6. DUTY CYCLE..................................................................................................... 3-4 7. PEAK POWER.................................................................................................... 3-4 8. AVERAGE POWER............................................................................................ 3-5 9. MODULATION.................................................................................................... 3-6 10. SUMMARY........................................................................................................ 3-8 CHAPTER 4. RADAR SYSTEM COMPONENTS...................................................... 4-1 1. INTRODUCTION................................................................................................. 4-1 2. PULSE RADAR SYSTEM................................................................................... 4-1 3. CONTINUOUS WAVE (CW) RADAR................................................................. 4-7 4. PULSE DOPPLER RADAR................................................................................ 4-9 5. MONOPULSE RADAR..................................................................................... 4-10 6. SUMMARY........................................................................................................ 4-13 i Table of Contents Electronic Warfare Fundamentals CHAPTER 5. RADAR PRINCIPLES...........................................................................5-1 1. INTRODUCTION..................................................................................................5-1 2. RADAR RANGE..................................................................................................5-1 3. AZIMUTH DETERMINATION..............................................................................5-7 4. ELEVATION DETERMINATION........................................................................5-11 5. RADAR RESOLUTION CELL...........................................................................5-12 6. PULSE DOPPLER VELOCITY DETERMINATION...........................................5-14 7. BASIC RADAR EQUATION..............................................................................5-18 8. SUMMARY........................................................................................................5-21 CHAPTER 6. ANTENNA CHARACTERISTICS AND SCANS...................................6-1 1. INTRODUCTION..................................................................................................6-1 2. PARABOLIC ANTENNA.....................................................................................6-1 3. CASSEGRAIN ANTENNA...................................................................................6-3 4. PHASED ARRAY ANTENNA..............................................................................6-5 5. ANTENNA GAIN..................................................................................................6-9 6. POWER DENSITY.............................................................................................6-11 7. CIRCULAR SCAN.............................................................................................6-12 8. LINEAR SCAN...................................................................................................6-16 9. UNIDIRECTIONAL SCAN.................................................................................6-16 10. BIDIRECTIONAL SCAN..................................................................................6-17 11. CONICAL SCAN..............................................................................................6-18 12. TRACK-WHILE-SCAN.....................................................................................6-20 13. IMPACT OF TERRAIN ON RADAR SCANS...................................................6-23 14. SUMMARY.......................................................................................................6-26 CHAPTER 7. TARGET TRACKING............................................................................7-1 1. INTRODUCTION..................................................................................................7-1 2. RANGE TRACKING............................................................................................7-2 3. CONICAL SCAN..................................................................................................7-4 4. TRACK-WHILE-SCAN (TWS).............................................................................7-6 5. LOBE-ON-RECEIVE-ONLY (LORO).................................................................7-11 6. MONOPULSE RADAR......................................................................................7-12 7. CONTINUOUS WAVE (CW) RADARS..............................................................7-16 8. PULSE DOPPLER RADAR...............................................................................7-20 9. SUMMARY........................................................................................................7-24 CHAPTER 8. RADAR MISSILE GUIDANCE TECHNIQUES......................................8-1 1. INTRODUCTION..................................................................................................8-1 2. COMMAND GUIDANCE......................................................................................8-3 3. SEMI-ACTIVE GUIDANCE..................................................................................8-6 4. ACTIVE GUIDANCE............................................................................................8-9 5. SEEKER-AIDED GROUND GUIDANCE/TRACK-VIA-MISSILE GUIDANCE...8-11 ii Electronic Warfare Fundamentals Table of Contents 6. ANTIAIRCRAFT ARTILLERY (AAA)................................................................ 8-12 7. SUMMARY........................................................................................................ 8-15 CHAPTER 9. INTRODUCTION TO RADAR JAMMING............................................ 9-1 1. INTRODUCTION................................................................................................. 9-1 2. RADAR JAMMING TYPES................................................................................. 9-1 3. RADAR JAMMING EMPLOYMENT OPTIONS.................................................. 9-3 4. FUNDAMENTALS OF RADAR JAMMING......................................................... 9-7 5. SUMMARY........................................................................................................ 9-15 CHAPTER 10. RADAR NOISE JAMMING............................................................... 10-1 1. INTRODUCTION............................................................................................... 10-1 2. RADAR NOISE JAMMING EFFECTIVENESS................................................. 10-1 3. RADAR NOISE JAMMING GENERATION....................................................... 10-4 4. BARRAGE JAMMING...................................................................................... 10-5 5. SPOT JAMMING............................................................................................... 10-6 6. SWEPT-SPOT JAMMING................................................................................. 10-7 7. COVER PULSE JAMMING............................................................................... 10-8 8. MODULATED NOISE JAMMING................................................................... 10-10 9. SUMMARY...................................................................................................... 10-11 CHAPTER 11. DECEPTION JAMMING................................................................... 11-1 1. INTRODUCTION............................................................................................... 11-1 2. FALSE TARGET JAMMING............................................................................. 11-3 3. RANGE DECEPTION JAMMING...................................................................... 11-5 4. ANGLE DECEPTION JAMMING...................................................................... 11-8 5. VELOCITY DECEPTION JAMMING............................................................... 11-11 6. MONOPULSE DECEPTION JAMMING.......................................................... 11-17 7. TERRAIN BOUNCE........................................................................................ 11-23 8. SUMMARY...................................................................................................... 11-24 CHAPTER 12. DECOYS.......................................................................................... 12-1 1. INTRODUCTION............................................................................................... 12-1 2. SATURATION DECOYS................................................................................... 12-1 3. TOWED DECOYS............................................................................................. 12-3 4. EXPENDABLE ACTIVE DECOYS.................................................................... 12-6 5. SUMMARY........................................................................................................ 12-7 CHAPTER 13. CHAFF EMPLOYMENT................................................................... 13-1 1. INTRODUCTION............................................................................................... 13-1 2. CHAFF CHARACTERISTICS........................................................................... 13-2 3. CHAFF OPERATIONAL EMPLOYMENT......................................................... 13-9 4. SUMMARY...................................................................................................... 13-16 iii Table of Contents Electronic Warfare Fundamentals CHAPTER 14. IR FUNDAMENTALS........................................................................14-1 1. INTRODUCTION................................................................................................14-1 2. BASIC IR THEORY...........................................................................................14-1 3. IR SIGNATURE SOURCES...............................................................................14-5 4. IR SEEKER CHARACTERISTICS.....................................................................14-7 5. IR SEEKER TYPES...........................................................................................14-9 6. IR MISSILE FLARE REJECTION....................................................................14-12 7. SUMMARY......................................................................................................14-18 CHAPTER 15. IR COUNTERMEASURES................................................................15-1 1. INTRODUCTION................................................................................................15-1 2. FLARE CHARACTERISTICS............................................................................15-1 3. ADVANCED FLARES.......................................................................................15-3 4. FLARE EMPLOYMENT.....................................................................................15-4 5. IRCM TACTICS.................................................................................................15-5 6. MISSILE APPROACH WARNING SYSTEMS (MAWS)....................................15-6 7. SUMMARY........................................................................................................15-8 CHAPTER 16. RADAR ELECTRONIC PROTECTION (EP) TECHNIQUES............16-1 1. INTRODUCTION................................................................................................16-1 2. RADAR RECEIVER PROTECTION..................................................................16-1 3. JAMMING SIGNAL AVOIDANCE.....................................................................16-4 4. JAMMING SIGNAL EXPLOITATION................................................................16-5 5. OVERPOWERING THE JAMMING SIGNAL.....................................................16-6 6. PULSE DURATION DISCRIMINATION............................................................16-7 7. ANGLE DISCRIMINATION................................................................................16-7 8. BANDWIDTH DISCRIMINATION......................................................................16-8 9. DOPPLER DISCRIMINATION...........................................................................16-9 10. TIME DISCRIMINATION..................................................................................16-9 11. SUMMARY.....................................................................................................16-10 CHAPTER 17. RADAR WARNING RECEIVER (RWR) BASIC OPERATIONS AND GEOLOCATION TECHNIQUES................................................................................17-1 1. INTRODUCTION................................................................................................17-1 2. RWR ANTENNAS..............................................................................................17-1 3. RWR RECEIVER/AMPLIFIERS.........................................................................17-3 4. SIGNAL PROCESSOR......................................................................................17-6 5. EMITTER IDENTIFICATION (EID) TABLES.....................................................17-8 6. RWR SCOPE DISPLAY....................................................................................17-8 7. RWR AUDIO......................................................................................................17-9 8. RWR INTERFACE CONTROL UNIT (ICU).....................................................17-10 9. RWR LIMITATIONS.........................................................................................17-10 10. THREAT GEOLOCATION TECHNIQUES....................................................17-15 11. SUMMARY.....................................................................................................17-20 iv Electronic Warfare Fundamentals Table of Contents CHAPTER 18. SELF-PROTECTION JAMMING SYSTEM OPERATIONS.............. 18-1 1. INTRODUCTION............................................................................................... 18-1 2. RECEIVE ANTENNAS...................................................................................... 18-2 3. RECEIVER SECTION....................................................................................... 18-2 4. SYSTEM PROCESSOR.................................................................................... 18-3 5. JAMMING TECHNIQUES GENERATOR......................................................... 18-4 6. TRANSMIT ANTENNAS................................................................................... 18-4 7. C-9492 CONTROL INDICATOR UNIT.............................................................. 18-5 8. JAMMING POD CONSIDERATIONS............................................................... 18-5 9. SUMMARY........................................................................................................ 18-7 ANNEX A. GLOSSARY.............................................................................................A-1 ANNEX B. EC-RELATED ABBREVIATIONS AND ACRONYMS.............................B-1 LIST OF REFERENCES v Table of Contents Electronic Warfare Fundamentals LIST OF FIGURES Figure 1-1. Radar System..........................................................................................1-1 Figure 1-2. Early Continuous Wave Radar Experiments........................................1-1 Figure 1-3. Pulse Radar Operation...........................................................................1-2 Figure 1-4. Radar Advantages and Disadvantages................................................1-3 Figure 1-5. Radar Target Discriminants...................................................................1-3 Figure 1-6. Angle Discrimination..............................................................................1-4 Figure 1-7. Velocity Discrimination..........................................................................1-5 Figure 1-8. Basic Radar Operation...........................................................................1-5 Figure 1-9. Early Warning Radar System.................................................................1-6 Figure 1-10. GCI Radar..............................................................................................1-7 Figure 1-11. Acquisition Radar and TTR..................................................................1-8 Figure 1-12. TTR with Acquisition............................................................................1-8 Figure 1-13. MiG-29...................................................................................................1-9 Figure 1-14. IR System..............................................................................................1-9 Figure 1-15. A Typical IADS....................................................................................1-10 Figure 2-1. Radio Frequency....................................................................................2-1 Figure 2-2. Radar Signal Wavelength.......................................................................2-2 Figure 2-3. Radar Signal Vertical Polarization........................................................2-3 Figure 2-4. Circular Polarization...............................................................................2-4 Figure 2-5. Impact of Polarization............................................................................2-4 Figure 2-6. Zero Doppler Effect – Stationary Target...............................................2-6 Figure 2-7. Doppler Effect – Closing Target............................................................2-6 Figure 2-8. Doppler Effect – Opening Target...........................................................2-6 Figure 2-9. Electromagnetic Spectrum....................................................................2-7 Figure 2-10. Impact of Refraction on RF Propagation..........................................2-10 Figure 2-11. Impact of Refraction on Target Elevation Determination................2-10 Figure 2-12. Superrefracting Surface Duct............................................................2-12 Figure 2-13. RF Atmospheric Attenuation.............................................................2-14 Figure 3-1. Typical Radar Pulse...............................................................................3-1 Figure 3-2. Constant PRF Radar Pulse....................................................................3-2 Figure 3-3. PRF Stagger............................................................................................3-2 Figure 3-4. PRF Jitter.................................................................................................3-3 Figure 3-5. Basic Radar Pulse..................................................................................3-3 Figure 3-6. Peak Power and Average Power...........................................................3-5 Figure 3-7. Radar Power and Energy.......................................................................3-6 Figure 3-8. Amplitude Modulation............................................................................3-6 Figure 3-9. Frequency Modulation...........................................................................3-7 Figure 3-10. Pulse Modulation..................................................................................3-7 Figure 4-1. Pulse Radar Block Diagram...................................................................4-1 Figure 4-2. Transmitter Group..................................................................................4-2 Figure 4-3. Receiver Group.......................................................................................4-3 Figure 4-4. Master Timer/Synchronizer....................................................................4-4 Figure 4-5. Parabolic Antenna..................................................................................4-4 vi Electronic Warfare Fundamentals Table of Contents Figure 4-6. A Scope Display.................................................................................... 4-5 Figure 4-7. B Scope Display.................................................................................... 4-5 Figure 4-8. RHI Scope Display................................................................................. 4-6 Figure 4-9. PPI Scope Display.................................................................................. 4-6 Figure 4-10. Continuous Wave Radar..................................................................... 4-7 Figure 4-11. Basic CW Doppler Radar..................................................................... 4-8 Figure 4-12. CW Doppler Radar Display................................................................. 4-8 Figure 4-13. CW and Pulse Doppler Radar Comparison....................................... 4-9 Figure 4-14. Basic Pulse Doppler Radar Diagram................................................ 4-10 Figure 4-15. Monopulse Radar............................................................................... 4-11 Figure 4-16. Monopulse Magic T’s......................................................................... 4-11 Figure 4-17. Magic T Output Signals..................................................................... 4-12 Figure 4-18. Monopulse Radar Track.................................................................... 4-12 Figure 4-19. Monopulse Radar Track Logic.......................................................... 4-13 Figure 5-1. Basic Radar Pulse................................................................................. 5-1 Figure 5-2. Radar Mile............................................................................................... 5-2 Figure 5-3. Second Time Around Echo................................................................... 5-3 Figure 5-4. Radar Pulse............................................................................................ 5-4 Figure 5-5. Radar Pulse at T1................................................................................... 5-5 Figure 5-6. Radar Pulse at T2................................................................................... 5-5 Figure 5-7. Radar Pulse at T3................................................................................... 5-6 Figure 5-8. Radar Range Resolution....................................................................... 5-6 Figure 5-9. Radar Beamwidth.................................................................................. 5-7 Figure 5-10. Azimuth Determination........................................................................ 5-8 Figure 5-11. Antenna Scan....................................................................................... 5-8 Figure 5-12. Horizontal Beamwidth Comparison................................................... 5-9 Figure 5-13. Horizontal Beamwidth and Azimuth Resolution............................. 5-10 Figure 5-14. Azimuth Resolution........................................................................... 5-10 Figure 5-15. Vertical Beamwidth and Elevation Resolution................................ 5-11 Figure 5-16. Elevation Resolution......................................................................... 5-12 Figure 5-17. Radar Resolution Cell........................................................................ 5-13 Figure 5-18. Radar Resolution Cell Dimensions.................................................. 5-13 Figure 5-19. Pulse Modulation............................................................................... 5-14 Figure 5-20. Harmonics of a Pulse Modulated Waveform................................... 5-15 Figure 5-21. Harmonic Content.............................................................................. 5-15 Figure 5-22. Spectral Line Frequencies................................................................ 5-16 Figure 5-23. Selective Clutter Canceling............................................................... 5-16 Figure 5-24. PRF and Spectral Lines..................................................................... 5-17 Figure 5-25. Pulse Doppler Filters......................................................................... 5-18 Figure 6-1. Parabolic Antenna................................................................................. 6-1 Figure 6-2. Parabolic Cylinder Antenna.................................................................. 6-2 Figure 6-3. Height-Finder Parabolic Antenna......................................................... 6-3 Figure 6-4. Multiple-Feed Parabolic Antenna......................................................... 6-3 Figure 6-5. Cassegrain Antenna.............................................................................. 6-4 Figure 6-6. Flat Plate Cassegrain Antenna............................................................. 6-4 Figure 6-7. Phased Array Antenna.......................................................................... 6-5 vii Table of Contents Electronic Warfare Fundamentals Figure 6-8. Phase Relationships..............................................................................6-6 Figure 6-9. Broadside Array......................................................................................6-7 Figure 6-10. End-Fire Array.......................................................................................6-7 Figure 6-11. Phased Array Antenna Scan................................................................6-8 Figure 6-12. Planar Array Antenna...........................................................................6-9 Figure 6-13. Radiation Pattern for a Parabolic Antenna.......................................6-11 Figure 6-14. Radar Antenna Pattern.......................................................................6-12 Figure 6-15. Circular Scan Radar...........................................................................6-13 Figure 6-16. PPI Scope Display..............................................................................6-14 Figure 6-17. Resolution Cell...................................................................................6-14 Figure 6-18. V-Beam Radar.....................................................................................6-15 Figure 6-19. Stacked Beam Radar..........................................................................6-15 Figure 6-20. Unidirectional Linear Scan................................................................6-16 Figure 6-21. Helical Scan........................................................................................6-17 Figure 6-22. Raster Scan.........................................................................................6-17 Figure 6-23. Conical Scan.......................................................................................6-18 Figure 6-24. Conical Scan Tracking Area..............................................................6-18 Figure 6-25. Palmer-Raster Scan............................................................................6-19 Figure 6-26. Palmer-Helical Scan...........................................................................6-20 Figure 6-27. Conventional TWS Radar...................................................................6-21 Figure 6-28. Phased Array Antenna.......................................................................6-21 Figure 6-29. Phased Array TWS.............................................................................6-22 Figure 6-30. Phased Array TWS Radar Display.....................................................6-23 Figure 6-31. The Radar Horizon..............................................................................6-23 Figure 6-32. Direct Terrain Masking.......................................................................6-25 Figure 6-33. Indirect Terrain Masking....................................................................6-26 Figure 7-1. Split-Gate Range Tracker.......................................................................7-2 Figure 7-2. Leading-Edge Range Tracker................................................................7-3 Figure 7-3. Conical Scan Positions..........................................................................7-4 Figure 7-4. Conical Scan Modulation.......................................................................7-5 Figure 7-5. Conical Scan Tracking Errors...............................................................7-5 Figure 7-6. Conical Scan Tracking...........................................................................7-6 Figure 7-7. Conventional TWS Radar Beams..........................................................7-7 Figure 7-8. Conventional TWS Azimuth Tracking...................................................7-8 Figure 7-9. Phased Array TWS.................................................................................7-9 Figure 7-10. Air-to-Air TWS Display.......................................................................7-10 Figure 7-11. Planar/Phased Array TWS Tracking Loop........................................7-10 Figure 7-12. LORO Mode.........................................................................................7-11 Figure 7-13. Monopulse Magic T............................................................................7-13 Figure 7-14. Magic T Output Signals......................................................................7-13 Figure 7-15. Monopulse Tracking Loops...............................................................7-14 Figure 7-16. Monopulse Elevation Tracking Error................................................7-15 Figure 7-17. Monopulse Elevation Track...............................................................7-15 Figure 7-18. Monopulse Azimuth Track.................................................................7-16 Figure 7-19. CW Radar............................................................................................7-16 Figure 7-20. FM CW Radar Range Determination (No Relative Motion)..............7-18 viii Electronic Warfare Fundamentals Table of Contents Figure 7-21. FM CW Radar Range Determination (Relative Motion)................... 7-18 Figure 7-22. Comparison of CW Radar and Pulse Doppler Radar...................... 7-20 Figure 7-23. Range Ambiguity............................................................................... 7-21 Figure 7-24. Pulse Doppler Speed Gate................................................................ 7-22 Figure 7-25. Range Ambiguity............................................................................... 7-23 Figure 7-26. Range Eclipsing................................................................................. 7-23 Figure 7-27. Resolving Range Ambiguity and Eclipsing..................................... 7-24 Figure 8-1. Initial Boost Phase................................................................................. 8-1 Figure 8-2. Mid-Course Guidance Phase................................................................ 8-2 Figure 8-3. Terminal Guidance Phase..................................................................... 8-3 Figure 8-4. Rectified Flight Profile........................................................................... 8-4 Figure 8-5. Command Guidance: Three-Point Pursuit.......................................... 8-5 Figure 8-6. Semi-Active Guided Missile.................................................................. 8-6 Figure 8-7. Semi-Active Guidance (Mid-Course).................................................... 8-7 Figure 8-8. Semi-Active Guidance (Terminal Phase)............................................. 8-8 Figure 8-9. Semi-Active Guidance CW Reference Signal...................................... 8-9 Figure 8-10. Active Guidance Mid-Course Intercept Phase.................................. 8-9 Figure 8-11. Active Guidance Phase..................................................................... 8-10 Figure 8-12. SAGG/Track-Via-Missile Guidance................................................... 8-11 Figure 8-13. Optically Aimed AAA......................................................................... 8-13 Figure 8-14. Radar-Directed AAA.......................................................................... 8-14 Figure 8-15. Sector/Barrage AAA.......................................................................... 8-15 Figure 9-1. Noise Jamming...................................................................................... 9-1 Figure 9-2. Deception Jamming............................................................................... 9-2 Figure 9-3. Stand-Off Jamming................................................................................ 9-3 Figure 9-4. False Target Jamming........................................................................... 9-4 Figure 9-5. Escort Jamming..................................................................................... 9-5 Figure 9-6. Escort Jamming Alignment.................................................................. 9-5 Figure 9-7. Self-Protection Jamming....................................................................... 9-6 Figure 9-8. Jamming Frequency Error.................................................................... 9-7 Figure 9-9. Correct Jamming Frequency Matching................................................ 9-8 Figure 9-10. S/N Ratio and Target Detection........................................................ 9-11 Figure 9-11. Receiver False Alarm Threshold...................................................... 9-11 Figure 9-12. S/N Ratio Greater Than One.............................................................. 9-12 Figure 9-13. S/N Ratio Less Than One.................................................................. 9-12 Figure 9-14. J/S Ratio Greater Than One.............................................................. 9-14 Figure 9-15. J/S Ratio Less Than One................................................................... 9-14 Figure 9-16. Burnthrough Range........................................................................... 9-15 Figure 10-1. Noise Level in a Typical Radar Receiver Output............................. 10-1 Figure 10-2. Impact of Noise Jamming................................................................. 10-2 Figure 10-3. Power Density – Narrow Bandwidth................................................. 10-2 Figure 10-4. Power Density – Wide Bandwidth.................................................... 10-3 Figure 10-5. Frequency Modulated (FM) Noise Jamming System...................... 10-5 Figure 10-6. Barrage Jamming.............................................................................. 10-6 Figure 10-7. Spot Jamming.................................................................................... 10-6 Figure 10-8. Spot Jamming Effectiveness............................................................ 10-7 ix Table of Contents Electronic Warfare Fundamentals Figure 10-9. Swept-Spot Jamming.........................................................................10-8 Figure 10-10. Cover Pulse Jamming......................................................................10-8 Figure 10-11. Range Gate Pull-Off Cover Pulse....................................................10-9 Figure 10-12. Velocity Gate Pull-Off Cover Pulse...............................................10-10 Figure 10-13. Conical Scan Modulated Jamming...............................................10-10 Figure 10-14. TWS Modulated Jamming..............................................................10-11 Figure 11-1. Deception Jamming System..............................................................11-2 Figure 11-2. False Target Generation.....................................................................11-3 Figure 11-3. Range Gate Tracking..........................................................................11-5 Figure 11-4. Range Gate Jamming Cover Pulse...................................................11-6 Figure 11-5. Range Gate Pull-Off............................................................................11-7 Figure 11-6. Inverse Amplitude Modulation Jamming..........................................11-8 Figure 11-7. Inverse Gain Jamming.......................................................................11-9 Figure 11-8. Swept Square Wave Jamming.........................................................11-10 Figure 11-9. Velocity Tracking Gate.....................................................................11-11 Figure 11-10. Velocity Gate Capture....................................................................11-12 Figure 11-11. Velocity Gate Pull-Off.....................................................................11-13 Figure 11-12. Doppler Noise Jamming.................................................................11-14 Figure 11-13. Impact of Doppler Noise Jamming................................................11-14 Figure 11-14. Narrowband Doppler Noise...........................................................11-15 Figure 11-15. Velocity Bin Masking......................................................................11-16 Figure 11-16. Impact of Doppler False Target Jamming....................................11-17 Figure 11-17. Monopulse Radar Receiver............................................................11-18 Figure 11-18. Filter Skirt Jamming Pulse.............................................................11-19 Figure 11-19. Ineffective Filter Skirt Jamming....................................................11-19 Figure 11-20. Monopulse Image Frequency........................................................11-20 Figure 11-21. Monopulse Image Jamming...........................................................11-21 Figure 11-22. Cross-Polarization Antenna Pattern.............................................11-21 Figure 11-23. Cross-Eye Jamming.......................................................................11-23 Figure 11-24. Terrain Bounce...............................................................................11-24 Figure 12-1. Tactical Air Launched Decoy.............................................................12-2 Figure 12-2. Miniature Air Launched Decoy (MALD)............................................12-3 Figure 12-3. Towed Decoy......................................................................................12-4 Figure 12-4. AN/ALE-50 System.............................................................................12-5 Figure 12-5. Generic Expendable...........................................................................12-6 Figure 13-1. “WINDOW” – The First Operational Employment of Chaff.............13-1 Figure 13-2. Aircraft Radar Cross Section (RCS)..................................................13-2 Figure 13-3. RR-170 Chaff Cartridge RCS..............................................................13-3 Figure 13-4. Threat Radar Aspect and Chaff RCS................................................13-4 Figure 13-5. Impact of Multiple Chaff Cartridge Employment on Chaff RCS......13-4 Figure 13-6. Chaff Length and Frequency Coverage............................................13-5 Figure 13-7. RR-170 Chaff Cartridge......................................................................13-6 Figure 13-8. Impact of Turbulence and Chaff Bloom Rate...................................13-7 Figure 13-9. Chaff Bloom Rate and Radar Resolution Cell..................................13-7 Figure 13-10. Impact of Chaff Polarization............................................................13-9 Figure 13-11. Area Saturation Tactics.................................................................13-10 x Electronic Warfare Fundamentals Table of Contents Figure 13-12. Chaff Corridor Tactics................................................................... 13-11 Figure 13-13. Self-Protection Chaff Tactics........................................................ 13-12 Figure 13-14. Self-Protection Chaff Effect on a TWS Radar.............................. 13-13 Figure 13-15. Self-Protection Chaff Impact on a Conical Scan Radar.............. 13-14 Figure 13-16. Self-Protection Chaff Impact on a Monopulse Radar................. 13-15 Figure 13-17. Self-Protection Chaff Impact on a Doppler Radar....................... 13-16 Figure 14-1. The IR Threat...................................................................................... 14-1 Figure 14-2. IR Frequency Band............................................................................ 14-2 Figure 14-3. Atmospheric IR Transmission.......................................................... 14-3 Figure 14-4. IR Missile Seeker............................................................................... 14-4 Figure 14-5. Aircraft IR Intensity............................................................................ 14-4 Figure 14-6. IR Signature Versus Aspect Angle................................................... 14-5 Figure 14-7. Target Signature Sources................................................................. 14-6 Figure 14-8. IR Detection Materials....................................................................... 14-7 Figure 14-9. IR Missile Seeker............................................................................... 14-7 Figure 14-10. Spin Scan Reticle............................................................................. 14-8 Figure 14-11. Missile Field of View........................................................................ 14-9 Figure 14-12. IR Missile Reticle........................................................................... 14-10 Figure 14-13. Conical Scan IR Seeker................................................................. 14-11 Figure 14-14. Impact of IR Missile Field of View................................................ 14-13 Figure 14-15. IR Missile – Narrow Field of View................................................. 14-13 Figure 14-16. Two-Color IR “Trigger”.................................................................. 14-15 Figure 14-17. Seeker Push-Ahead “Response” Technique............................... 14-16 Figure 14-18. Seeker Push-Pull “Response” Technique................................... 14-17 Figure 14-19. Sector Attenuation “Response” Technique................................ 14-18 Figure 15-1. The MJU-7 Flare................................................................................. 15-1 Figure 15-2. Impact of Flare Rise Time................................................................. 15-2 Figure 15-3. Kinematic Flare.................................................................................. 15-3 Figure 15-4. Flare Visual Signature....................................................................... 15-4 Figure 15-5. Initial Maneuver and Flare Employment.......................................... 15-5 Figure 15-6. IRCM.................................................................................................... 15-6 Figure 15-7. Missile Alert Warning System (MAWS)............................................ 15-7 Figure 17-1. Radar Warning Receiver (RWR) Antennas...................................... 17-2 Figure 17-2. RWR Antenna Sensitivity.................................................................. 17-2 Figure 17-3. RWR Antenna Polarization................................................................ 17-3 Figure 17-4. Crystal Video RWR Receiver............................................................ 17-4 Figure 17-5. Superheterodyne RWR Receiver...................................................... 17-5 Figure 17-6. RWR System...................................................................................... 17-6 Figure 17-7. Signal Processor Signal Priority...................................................... 17-7 Figure 17-8. Sample EID Table............................................................................... 17-8 Figure 17-9. RWR Scope Azimuth Positioning..................................................... 17-9 Figure 17-10. RWR Interface Control Unit........................................................... 17-10 Figure 17-11. Signal Frequency Spectrum......................................................... 17-11 Figure 17-12. RWR Threat Azimuth Position Determination............................. 17-12 Figure 17-13. RWR Azimuth Error....................................................................... 17-13 Figure 17-14. RWR Multiple Threat Symbols...................................................... 17-14 xi Table of Contents Electronic Warfare Fundamentals Figure 17-15. Triangulation...................................................................................17-16 Figure 17-16. Interferometer Components..........................................................17-17 Figure 17-17. Interferometer Array.......................................................................17-17 Figure 17-18. Time of Arrival Measurements......................................................17-18 Figure 17-19. Time Difference of Arrival Measurements....................................17-19 Figure 18-1. ALQ-184 Pod.......................................................................................18-1 Figure 18-2. ALQ-184 Receive Antenna Location.................................................18-2 Figure 18-3. ALQ-184 Simplified Block Diagram...................................................18-3 Figure 18-4. ALQ-184 Transmit Antenna Location...............................................18-4 Figure 18-5. C-9492 Control Indicator Unit............................................................18-5 Figure 18-6. F-16 ECM CMS....................................................................................18-6 xii Electronic Warfare Fundamentals Table of Contents LIST OF EQUATIONS Equation 1-1. Basic Radar Range Equation........................................................... 1-4 Equation 2-1. Basic Wavelength Equation............................................................. 2-2 Equation 2-2. Index of Refraction.......................................................................... 2-11 Equation 2-3. Refractivity of RF Waves (Normal Radar Frequencies)................ 2-11 Equation 3-1. Duty Cycle.......................................................................................... 3-4 Equation 3-2. Energy Per Pulse............................................................................... 3-5 Equation 5-1. Basic Radar Range Determination Equation.................................. 5-2 Equation 5-2. Radar Mile.......................................................................................... 5-2 Equation 5-3. Maximum Unambiguous Range....................................................... 5-4 Equation 5-4. Range Resolution.............................................................................. 5-7 Equation 5-5. Azimuth Resolution......................................................................... 5-11 Equation 5-6. Altitude Resolution.......................................................................... 5-12 Equation 5-7. Power Density From an Antenna................................................... 5-18 Equation 5-8. Power Density at the Target........................................................... 5-19 Equation 5-9. Power Density at the Antenna........................................................ 5-19 Equation 5-10. Signal Power Density.................................................................... 5-20 Equation 5-11. Basic Radar Equation................................................................... 5-20 Equation 6-1. Directive Gain.................................................................................... 6-9 Equation 6-2. Power Gain....................................................................................... 6-10 Equation 6-3. Power Density for an Isotropic Antenna....................................... 6-10 Equation 6-4. Power Density for a Practical Antenna.......................................... 6-10 Equation 6-5. Power Gain of a Practical Antenna................................................ 6-11 Equation 6-6. Basic Radar Horizon Equation....................................................... 6-24 Equation 6-7. Simplified Radar Horizon Equation................................................ 6-24 Equation 6-8. Target LOS Distance....................................................................... 6-24 Equation 9-1. Signal Power Density........................................................................ 9-9 Equation 9-2. Thermal Noise.................................................................................... 9-9 Equation 9-3. Signal-to-Noise Ratio...................................................................... 9-10 Equation 9-4. Jamming-to-Signal Ratio................................................................ 9-13 xiii Table of Contents Electronic Warfare Fundamentals LIST OF TABLES Table 2-1. Antenna Polarization Loss......................................................................2-5 Table 2-2. Commonly Used Prefixes for Scientific Notation..................................2-8 Table 2-3. Radar Frequency Band Designations....................................................2-9 Table 7-1. Pulse Doppler Tracking Capabilities....................................................7-21 Table 17-1. RWR Frequency Band Designators....................................................17-3 xiv Electronic Warfare Fundamentals Chapter 1. Introduction to RADAR CHAPTER 1. INTRODUCTION TO RADAR 1. INTRODUCTION The word “RADAR” is an acronym for RAdio Detection And Ranging. As it was originally conceived, radio waves were used to detect the presence of a target and to determine its distance or range (Figure 1-1). Figure 1-1. Radar System 2. HISTORY The reflection of radio waves by objects was first noted more than a century ago. In 1903, the reflection of radio waves was employed in Germany to demonstrate detection of ships at sea (Figure 1-2). In 1922, Marconi presented the same idea in Britain but received little official interest. These early experiments used continuous wave, or CW, transmissions and relied on the reflection of a transmitted wave from a target to indicate the presence of a target. CW transmissions can detect the presence of an object and, if the radio wave is formed into a narrow beam, can also provide azimuth information. CW transmissions cannot provide range. Figure 1-2. Early Continuous Wave Radar Experiments 1-1 Chapter 1. Introduction to RADAR Electronic Warfare Fundamentals a. The lack of range information was a serious limitation but was finally overcome by modulating the radio wave transmissions to send out a train of short pulses (Figure 1-3). The time between pulse transmission and an echo return to the receiver provides a direct measurement of range. Practical development of the pulse radar began in the 1930s, principally in the United States, Britain, and Germany. Due to deteriorating relations with Germany and the threat of invasion, the British intensified their efforts to develop a pulse radar in 1935. These efforts culminated in the development and deployment of multiple radar stations which formed the Chain Home System. These radar installations provided critical information to British pilots on the size and location of German bomber formations during the Battle of Britain. Figure 1-3. Pulse Radar Operation b. The Chain Home System is considered the first integrated air defense system, or lADS. Radar development, with its obvious military and civilian applications, has continued unabated to the present day. 3. TARGET DISCRIMINANTS The widespread military and civilian application of radar is based on its inherent advantages over the human eye (Figure 1-4). Radar can “see” farther than the human eye and more accurately assess the range or distance of an object. Radar works well in all-weather conditions and is relatively immune to smoke, haze, and clouds. What's more, radar works 24 hours a day because it can transmit its own energy and does not have to rely on sunshine or ambient radiation. There are some disadvantages of radar when compared to the human eye. First, radar does not have the resolution that the human eye has. While radar can detect the presence of an airplane, the human eye can discern, in great detail, the shape, size, color, and even markings. This can be a serious limitation if positive identification is required prior to engagement. 1-2 Electronic Warfare Fundamentals Chapter 1. Introduction to RADAR Figure 1-4. Radar Advantages and Disadvantages Second, the human eye is not bothered by undesirable reflections, called clutter, the way radar sometimes is. Although metal is the best reflector of radio frequency (RF) energy, nearly any material will reflect some RF energy. Mountains, trees, buildings, rain, birds, and chaff all reflect RF energy. Radar systems must use target discriminants to isolate the desired target return from the clutter. These target discriminants include range, velocity, and angle (Figure 1-5). Figure 1-5. Radar Target Discriminants a. The first target discriminant is range. The time an RF wave takes to go to, and return from, a target allows measurement of the range to that target. We know that RF energy travels at the speed of light, or “c” which is 3 x 108 meters per second. Target range can be determined by using the basic radar range equation (Equation 1-1), target range equals measured time, multiplied by the speed of light (“c”), divided by 2. 1-3 Chapter 1. Introduction to RADAR Electronic Warfare Fundamentals Equation 1-1. Basic Radar Range Equation b. Target angle discrimination is another critical capability of radar systems. In order for a radar system to detect a target, the antenna must be pointed at the target during the transmission and reception of RF energy. The ability of a radar system to accurately determine angle is a function of the horizontal beamwidth of the antenna. If the radar sweep is referenced to true North, the angle of a radar return can be measured relative to true North (Figure 1-6). Figure 1-6. Angle Discrimination c. Velocity discrimination is a specific capability of CW and pulse Doppler radar systems. The transmitters of CW radars send out continuous RF at a specific frequency (Figure 1-7). The reflected signal frequency is changed, or shifted, by a specific amount by a moving target. This frequency shift, called the Doppler effect, allows the measurement of the velocity of that target relative to the radar. The receiver measures this frequency difference which equates to a specific radial velocity. Pulse Doppler radars can measure the Doppler effect while still obtaining the range. 1-4 Electronic Warfare Fundamentals Chapter 1. Introduction to RADAR Figure 1-7. Velocity Discrimination d. A basic pulse radar system consists of a transmitter, antenna, receiver, and a master timer (Figure 1-8). The transmitter sends electromagnetic energy (RF) to the antenna. This energy is radiated through the atmosphere. When this RF energy is interrupted by any object, such as a plane, ship, or the earth, a portion of the RF energy is reflected back to the antenna and processed by the receiver. Figure 1-8. Basic Radar Operation The reflection is called an echo, and the object interrupting the RF energy is called a target. The presence of an echo indicates target detection. If the target detected is the desired target, the echo is referred to as a target signal. If the echo is from undesired targets, such as the earth, the echo is referred to as clutter. This is especially true when the undesirable echoes make the detection of the desired target difficult. The capability of the antenna to focus the RF energy 1-5 Chapter 1. Introduction to RADAR Electronic Warfare Fundamentals affects the angular discrimination of the radar. The ability of the master timer to determine the time between RF transmission and target echo reception impacts the range determination capability of the radar. The ability of the receiver to analyze the Doppler frequency shift in the target echo determines the velocity discrimination capability of the radar and the ability of the radar to reject clutter. 4. INTRODUCTION TO INTEGRATED AIR DEFENSE SYSTEMS (lADS) Radar systems have the inherent capability to determine accurate range, azimuth, and/or velocity information on airborne targets. Radar systems can provide this information in nearly all types of weather, day or night, and at distances that far exceed the capabilities of the human eye. Military commanders have taken advantage of these capabilities by employing radar systems to provide air defense for high-value targets. The primary missions of radar systems employed for air defense are attack warning and threat engagement. a. Radar systems specifically designed to provide attack warning are called early warning (EW) radars (Figure 1-9). These radars are characterized by high power output, large antennas, and low frequencies. These same characteristics limit the accuracy of the target parameters available from early warning radars. The long-range detection of aircraft and the earliest possible attack warning capabilities of early warning radars provide the first line of defense for the air defense system. Figure 1-9. Early Warning Radar System 1-6 Electronic Warfare Fundamentals Chapter 1. Introduction to RADAR b. Radar systems designed to provide target engagement information include ground control intercept (GCI) radars, acquisition radars, target tracking radars (TTRs), and airborne interceptor (Al) radars. (1) GCI radars are designed to provide sufficiently accurate target aircraft range, azimuth, and altitude information to vector Al assets to intercept and destroy attacking aircraft (Figure 1-10). To provide this data, early warning radars can be deployed along with specialized height finder radars. This combination of radar systems is commonly referred to as a GCI site. Newer GCI radar systems, employing phased array antennas and Doppler processing, can provide the required 3-dimensional target information. Any radar system, or combination of radar systems, that can determine 3-dimensional target data, and is equipped with the communication equipment to pass this information to Al assets, can act as a GCI site. GCI radar systems can be used to supplement early warning radar systems to provide critical attack warning. Figure 1-10. GCI Radar (2) Acquisition radar systems are designed to act as GCI radars for ground based TTRs. Acquisition radar systems generally have shorter range capability than early warning radars and operate at higher frequencies. These radar systems provide accurate target range and azimuth data to TTRs to facilitate target engagement. Acquisition radars can be a distinct radar system (Figure 1-11) or be incorporated as part of the TTR (Figure 1-12). 1-7 Chapter 1. Introduction to RADAR Electronic Warfare Fundamentals Figure 1-11. Acquisition Radar and TTR Figure 1-12. TTR with Acquisition (3) The primary role of TTRs, in support of an air defense system, is to provide continuous and accurate target parameters to a fire control computer. The fire control computer uses this data to guide missiles or aim antiaircraft artillery (AAA) to destroy attacking aircraft. TTRs employ various tracking techniques to continuously update target parameters. TTRs generally employ high frequencies, narrow beamwidths, and computer signal processing to enhance the accuracy of target parameters provided to the fire control computer. 1-8 Electronic Warfare Fundamentals Chapter 1. Introduction to RADAR (4) Al radar systems are TTRs employed by fighter aircraft to engage and destroy airborne targets (Figure 1-13). These radar systems are characterized by high frequency, sophisticated computer processing, and accurate target tracking capability. They are designed to allow the Al asset to employ air-to-air missiles and guns/cannons. TTRs and Al radars constitute the highest radar threat associated with an air defense system. Figure 1-13. MiG-29 (5) Another growing lethal threat associated with an air defense system is infrared (IR) missiles. IR missile systems can be man-portable (Figure 1-14), mounted on vehicles, or employed by Al assets. These missile systems guide on the distinctive IR signature of aircraft. The recent proliferation and enhanced performance of IR systems has increased the contribution of these systems to air defense. Figure 1-14. IR System 1-9 Chapter 1. Introduction to RADAR Electronic Warfare Fundamentals c. All these radar systems can be deployed to provide air defense for a particular country or geographical area. When the employment of these radar systems is integrated by a command and control (C2) structure, this constitutes an lADS (Figure 1-15). The C2 structure allows the military commander to take advantage of the threat warning provided by early warning radars. Based on this threat warning, the military commander can allocate specific assets (GCI and Al assets, or acquisition radars and TTRs) to engage airborne targets. This allocation decision is based on the capabilities of these systems and the tactical situation. This allocation process enables the military commander to maximize the capabilities of his forces to engage and destroy attacking aircraft. Figure 1-15. A Typical IADS 5. SUMMARY Radar systems are the cornerstones of a modern lADS. Radar and IR threat systems operate at frequencies that span most of the electromagnetic spectrum. Each system has unique capabilities and operating characteristics that enable it to accomplish assigned tasks in support of the lADS. In order to effectively employ offensive air power on the modern battlefield, the systems that support the lADS must be negated. A basic knowledge of how radar and IR systems operate, their capabilities, limitations, and the available countermeasures is the key to defeating these systems. The purpose of this book is to provide this information. 1-10 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation CHAPTER 2. CHARACTERISTICS OF RF RADIATION 1. INTRODUCTION In order for a radar system to determine range, azimuth, elevation, or velocity data, it must transmit and receive electromagnetic radiation. This electromagnetic radiation is referred to as radio frequency (RF) radiation. RF transmissions have specific characteristics that determine the capabilities and limitations of a radar system to provide these target discriminants, based on an analysis of the characteristics of the target return. The frequency of transmitted RF energy affects the ability of a radar system to analyze target return, based on time, to determine target range. RF frequency also affects the ability of the transmitting antenna to focus RF energy into a narrow beam to provide azimuth and elevation information. The wavelength and frequency of the transmitted RF energy impact the propagation of the radar signal through the atmosphere. The polarization of the RF signal affects the amount of clutter the radar must contend with. The ability of a radar system to use the Doppler effect in analyzing the radar return impacts the velocity discrimination capability of the radar. These characteristics of RF radiation will be discussed in this chapter. Figure 2-1. Radio Frequency 2. FREQUENCY The output signal from a typical radio or radar system has several important characteristics that affect the capabilities and limitations of radio or radar systems. The first characteristic considered is usually RF. The frequency of the transmitted signal is the number of times per second the RF energy completes one cycle. The RF signal depicted in Figure 2-1 has a frequency of one cycle per second. The basic unit of measurement is the hertz (Hz). One hertz equals one cycle per second. Most radars have an RF in the millions of hertz, or megahertz (MHz). 2-1 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals 3. WAVELENGTH A characteristic of any RF signal is wavelength. Wavelength is a measure of the physical distance between peaks of a sine wave propagated in space (Figure 2-2). Figure 2-2. Radar Signal Wavelength Though wavelength is measured in meters, most radar signals have wavelengths measured in centimeters or millimeters. The wavelength of a radar signal can be computed using the equation shown in Equation 2-1. The relationship between wavelength and frequency is inverse: the higher the frequency, the shorter the wavelength. In early radio and radar terminology, wavelength was used instead of frequency to describe operating characteristics of a system. Today, wavelength is used to describe systems operating at very high frequencies, such as millimeter wave, and for describing infrared (IR) systems. Equation 2-1. Basic Wavelength Equation 4. POLARIZATION Another characteristic of a radio frequency wave is polarization. Polarization is determined by the radar antenna and refers to the orientation of the RF wave as it travels through space. There are two types of polarization: linear and circular. 2-2 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation a. Traveling electromagnetic energy has two components: an electrostatic field and a magnetic field. These two fields are always perpendicular to each other and perpendicular to the direction of travel. The polarization of the wave is defined in terms of the orientation to the electrostatic field. Many radar antennas are linearly polarized, either vertically or horizontally. The signal depicted in Figure 2-3 is vertically polarized. Figure 2-3. Radar Signal Vertical Polarization b. Some radars use circular polarization to improve target detection in rain. Circular polarization can be right-hand, or left-hand orientation. For circular polarization, the direction of the electrostatic field varies with time and traces a circular locus about a fixed plane perpendicular to the direction of propagation. For a right-hand circular polarized signal, the electrostatic vector appears to rotate in a clockwise direction. For a left-hand circular polarized signal, the rotation is counterclockwise. Circular polarization can be visualized by pointing the thumb of either hand in the direction of propagation and curling the fingers in the direction of electrostatic field rotation (Figure 2-4). 2-3 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals Figure 2-4. Circular Polarization c. The impact of polarization on receivers and transmitters is fairly straightforward. If an antenna is designed to receive a particular polarization, it will have difficulty receiving a signal with an opposite polarization. This situation is defined as cross polarization (Figure 2-5). Figure 2-5. Impact of Polarization 2-4 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation The impact of cross polarization on electronic combat can be dramatic. If a radar warning receiver antenna is polarized to receive vertically polarized signals, a threat system employing a horizontally polarized radar signal may not be detected, or may be displayed on the scope well after the threat has acquired the aircraft. In addition, if the jamming antenna on an electronic attack (EA) system is also vertically polarized, it may not be able to jam this system. Fortunately, this potentially lethal situation rarely occurs, but future threat systems may take advantage of this situation. Table 2-1 details the impact of polarization on selected transmit and receive antenna combinations. Table 2-1. Antenna Polarization Loss 5. DOPPLER EFFECT The “Doppler effect” takes advantage of the fact that the frequency of RF waves will be changed or shifted when reflected from a target moving relative to the radar. The shifted frequency of the returning RF wave depends on the movement of the aircraft in relation to the radar. In Figures 2-6, 2-7, and 2-8, fo is the transmitted frequency of the radar, and ft is the frequency of the reflected RF 2-5 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals wave from the target. For a stationary target, the frequency of the reflected signal will equal the frequency of the transmitted signal (Figure 2-6). Figure 2-6. Zero Doppler Effect – Stationary Target a. For a target moving toward the radar, the frequency of the reflected signal will be higher than the transmitted signal (Figure 2-7). Figure 2-7. Doppler Effect – Closing Target b. The reflected frequency for a target moving away from the radar will be lower than the transmitted frequency (Figure 2-8). Figure 2-8. Doppler Effect – Opening Target 2-6 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation 6. ELECTROMAGNETIC SPECTRUM The portion of the electromagnetic spectrum (Figure 2-9) that today's electronic combat systems must deal with starts with radio waves and encompasses microwaves, infrared, and a small portion of the ultraviolet region. Communications systems generally operate in the HF, UHF, and VHF regions. Some satellite communications operate in the SHF region. Radars operate in the microwave region, normally from 0.2 – 200 gigahertz. Infrared systems operate in the region just below visible light. Figure 2-9. Electromagnetic Spectrum 2-7 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals a. Table 2-2 lists prefixes commonly used to indicate scientific notation and their abbreviations. These prefixes are often used when dealing with extremely high frequency radar signals or RF waves with extremely small wavelengths. For example, when dealing with extremely high frequency RF, it is simpler to use gigahertz, or GHz. One gigahertz is one thousand megahertz (MHz). For example, a radar operating at 3150 MHz is also operating at an RF of 3.150 GHz. Table 2-2. Commonly Used Prefixes for Scientific Notation b. Frequency bands are often used when discussing radars and electronic combat systems. Radar designers use a frequency band designation system entirely different from the one used in electronic combat. Table 2-3 depicts both frequency band designation systems and the corresponding frequency ranges. 2-8 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation Table 2-3. Radar Frequency Band Designations 7. RF PROPAGATION Propagation characteristics of RF energy are profoundly affected by the earth's surface and atmospheric conditions. Any analysis of radar performance must take into account the propagation phenomena associated with RF radiation in a “real world” environment. The most important propagation phenomena include refraction, anomalous propagation (ducting), and attenuation. a. In a vacuum, RF waves travel in a straight line. However, RF waves propagating within the earth's atmosphere do not travel in a straight line. The earth's atmosphere bends, or refracts, RF waves. One impact of the atmospheric refraction of RF waves is an increase in the line of sight (LOS) of the radar. This increase in radar LOS effectively extends the range of the radar system (Figure 2-10). 2-9 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals Figure 2-10. Impact of Refraction on RF Propagation Atmospheric refraction of RF energy can also induce elevation measurement errors in radar systems (Figure 2-11). Figure 2-11. Impact of Refraction on Target Elevation Determination (1) The refraction of RF waves in the atmosphere is caused by the variation in the velocity of propagation with altitude. The index of refraction (n) is used to describe this velocity variation and is defined by Equation 2-2. 2-10 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation Equation 2-2. Index of Refraction (2) The term refractivity (N) is used for predicting the impact of refraction on RF wave propagation. Refractivity is a “scaled up” expression for the index of refraction and is used by radar designers to calculate the impact of refraction on actual radar systems. At normal radar operating frequencies, the refractivity for air containing water vapor can be computed using Equation 2-3. Equation 2-3. Refractivity of RF Waves (Normal Radar Frequencies) (3) As altitude increases, the barometric pressure and water vapor content decrease rapidly. At the same time, the absolute temperature decreases slowly based on the standard lapse rate. Using Equation 2-3, it can be seen that the refractivity of the atmosphere decreases with increasing altitude. This decrease in refractivity means that the velocity of RF waves increases with altitude. The result is a downward bending, or refraction, of RF waves as depicted in Figure 2-10. RF wave refraction primarily affects ground-based radar systems at low antenna elevation angles, especially at or near the horizon. For most radar applications, refraction is not a factor at elevation angles above 5 degrees. b. The term anomalous, or nonstandard, propagation is used to describe atmospheric conditions that extend the propagation of RF waves and increase radar range. The most common anomalous propagation phenomena is called superrefraction, or ducting. (1) A superrefracting duct is formed when the refractivity of the atmosphere (Equation 2-2) rapidly decreases with altitude. Based on Equation 2-2, this occurs when the temperature increases with altitude and/or the water vapor content decreases with altitude. An increase in temperature with altitude is called a temperature inversion. To produce a duct, the temperature inversion must be very pronounced. 2-11 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals Figure 2-12. Superrefracting Surface Duct (2) A superrefracting duct acts like a wave guide which traps the RF wave (Figure 2-12). This channels the radar signal and reduces attenuation. In order for an RF wave to propagate within a duct, the angle of the radar signal, in relation to the duct, should be less than one degree. The RF waves trapped by the duct take advantage of the decrease in refractivity and travel much further than normal. This can greatly extend the range of a radar system. (3) The extension of radar range inside a duct can result in a reduction of radar coverage outside the duct. The area of reduced radar coverage because of ducting is called a radar hole. Due to radar holes, the extended radar range caused by ducting may result in a decrease in radar coverage along other paths of propagation. These holes can seriously degrade the effectiveness of early warning radar systems. For example, a radar system is taking advantage of a duct formed at the surface to extend low altitude radar range (Figure 2-12). Airborne targets flying just above the duct would normally be detected, but because of ducting, these targets may be missed. (4) Water vapor content is a significant factor in producing ducts. Consequently, most ducts are formed over water and in warm climates. Any atmospheric phenomenon that results in a pronounced increase in temperature and/or a decrease in water vapor content as altitude increases can generate a superrefracting duct, of which there are three types. A superrefracting duct which is formed just above the surface of the earth is referred to as a surface duct. A surface duct formed just above the surface of the ocean is called an evaporation duct. A duct which is formed well above the surface of the earth is known as an elevated duct. (a) Surface ducts formed over land are usually a result of the nighttime radiation of heat from the earth. Duct formation is especially prevalent during the 2-12 Electronic Warfare Fundamentals Chapter 2. Characteristics of RF Radiation summer months when the ground is moist. As the earth loses heat, a temperature inversion is created at the surface coupled with a sharp decrease in the moisture content. These conditions are favorable to the formation of a surface duct. A superrefracting duct can also be produced by the diverging downdraft under a thunderstorm. The cool air that is dispersed creates a local temperature inversion while the water vapor content decreases due to rain. Surface ducts formed in conjunction with thunderstorms are difficult to predict and normally persist for a short period of time. (b) A superrefracting surface duct that lies just above the surface of the ocean is a result of evaporated water, thus the term evaporation duct. The air in contact with the ocean is saturated with water vapor, while the air several feet above the ocean contains a much lower level. This rapid decrease in water vapor pressure with an increase in altitude creates an evaporation duct. An evaporation duct exists over the ocean almost all the time. The height of this duct varies from 20 to 100 feet based on the season, time of day, and wind speed. One positive aspect of an evaporation duct is the extended range available to a shipborne radar system with a properly aligned antenna. This extended range coverage against surface ships and low altitude aircraft is a definite advantage of ducted propagation. (c) An elevated duct is generally formed by a temperature inversion in the upper atmosphere. To take maximum advantage of the increased radar range inside an elevated duct, both the radar and the target should be inside the elevated duct. In addition, radar systems operating below an elevated duct may also experience enhanced range performance. (4) The presence of surface ducts and elevated ducts, especially over land, are extremely difficult to predict and may persist for very short periods of time. The atmospheric conditions favorable to duct formation are difficult to predict using conventional weather forecasting techniques. c. The attenuation of RF energy in a clear atmosphere is due to the presence of oxygen and water vapor. Attenuation results when a portion of the RF energy strikes these molecules and is absorbed as heat. Figure 2-13 details the RF attenuation loss due to atmospheric gasses based on the frequency of the RF energy. 2-13 Chapter 2. Characteristics of RF Radiation Electronic Warfare Fundamentals Figure 2-13. RF Atmospheric Attenuation (1) At frequencies below 1 GHz, the effect of atmospheric attenuation is negligible. Above 10 GHz, atmospheric attenuation increases dramatically. This dramatic signal loss impacts the maximum detection range of radars operating in the millimeter wavelength band. (2) RF energy attenuation decreases as altitude increases. The RF attenuation experienced by an air-to-air radar will depend on the altitude of the target as well as target range. For a ground-based radar, RF attenuation will decrease as antenna elevation increases. 8. SUMMARY Since all radar operations depend on the transmission and reception of RF energy, a basic knowledge of RF frequency, wavelength, and polarization provides the basis for understanding the more complex radar characteristics. Since most modern radar systems employ some form of Doppler signal processing, the concept of the Doppler effect is fundamental to understanding modern radar operation. The concepts of refraction, anomalous propagation (ducting), and atmospheric attenuation are key to understanding how RF waves propagate in the atmosphere. The topics in this chapter provide a foundation for understanding radar and jamming system operation. 2-14 Electronic Warfare Fundamentals Chapter 3. Radar Signal Characteristics CHAPTER 3. RADAR SIGNAL CHARACTERISTICS 1. INTRODUCTION Every radar produces a radio frequency (RF) signal with specific characteristics that differentiate it from all other signals and define its capabilities and limitations. Pulse width (pulse duration), pulse recurrence time (pulse repetition interval), pulse repetition frequency, and power are all radar signal characteristics determined by the radar transmitter. Listening time, rest time, and recovery time are radar receiver characteristics. An understanding of the terms used to describe these characteristics is critical to understanding radar operation. 2. PULSE WIDTH (PW) Figure 3-1 depicts the output from a typical pulse radar. PW, sometimes called pulse duration (PD), is the time that the transmitter is sending out RF energy. PW is measured in microseconds. It has an impact on range resolution capability, that is, how accurately the radar can discriminate between two targets based on range. Figure 3-1. Typical Radar Pulse 3. PULSE RECURRENCE TIME (PRT) Pulse recurrence time is also known as pulse repetition time. PRT is the time required for a complete transmission cycle. This is the time from the beginning of one pulse of RF energy to the beginning of the next. PRT is measured in microseconds. PRT is the same as pulse repetition interval (PRI), which is used in radar warning receivers and other electronic warfare support (ES) assets to discriminate between radar systems. It also affects maximum radar range. 3-1 Chapter 3. Radar Signal Characteristics Electronic Warfare Fundamentals 4. PULSE REPETITION FREQUENCY (PRF) One of the most important characteristics of a pulse radar signal is pulse repetition frequency. PRF is the rate at which pulses or pulse groups are transmitted. Generally, PRF is the number of pulses generated per second and is expressed in hertz (Hz). PRF and PRI are related in that PRI is the inverse of PRF. A word of caution—do not confuse the operating frequency of the radar, which is measured in Hz, with the pulse repetition frequency, which is also measured in Hz. They are entirely different characteristics of a pulsed radar signal. Figure 3-2. Constant PRF Radar Pulse a. A pulse radar operating at an unvarying PRF is called a constant PRF radar (Figure 3-2). Pulse radar systems can employ PRF stagger or PRF jitter as an electronic protection (EP) technique against repeater or synchronous jammers. The time between each pulse is the PRI. Figure 3-3. PRF Stagger 3-2 Electronic Warfare Fundamentals Chapter 3. Radar Signal Characteristics b. PRF stagger is accomplished by assuring that no adjacent PRIs are equal. The number of different PRIs generated is called the “position” of the stagger. Two-position stagger would have two PRI values, for example, 300 microseconds and 500 microseconds (Figure 3-3). c. PRF jitter may be considered a random stagger. It is also an EP technique to counter synchronous jammers. PRF jitter has no repeating pattern of PRI values (Figure 3-4). Figure 3-4. PRF Jitter 5. RADAR RECEIVER CHARACTERISTICS Pulse repetition frequency, pulse recurrence time, and pulse width are determined by the transmitter. The pulse radar signal characteristics that relate to receiver operation are rest time, recovery time (RT), and listening time (LT) (Figure 3-5). Figure 3-5. Basic Radar Pulse 3-3 Chapter 3. Radar Signal Characteristics Electronic Warfare Fundamentals a. Rest time is the time between the end of one transmitted pulse and the beginning of the next. It represents the total time that the radar is not transmitting. Rest time is measured in microseconds. b. Recovery time (RT) is the time immediately following transmission time during which the receiver is unable to process returning radar energy. RT is determined by the amount of isolation between the transmitter and receiver and the efficiency of the duplexer. A part of the high power transmitter output spills over into the receiver and saturates this system. The time required for the receiver to recover from this condition is RT. c. Listening time (LT) is the time the receiver can process target returns. Listening time is measured from the end of the recovery time to the beginning of the next pulse, or PRT minus (PW + RT). Listening time is measured in microseconds. 6. DUTY CYCLE Duty cycle is the ratio of the time the transmitter operates to the time it could operate during a given transmission cycle. The duty cycle of a radar can be computed by dividing the PW by the PRT, or by multiplying the PW times the PRF. Duty cycle has no units (Equation 3-1). CW radars have a duty cycle of 100%, while early warning radars may have a duty cycle of around 1%. Equation 3-1. Duty Cycle 7. PEAK POWER The power output of a radar is normally expressed in terms of peak power or average power (Figure 3-6). Peak power is the amplitude, or power, of an individual radar pulse. It is simply the power, measured in watts or megawatts, that is radiated when the transmitter is on. The power a radar transmits is normally used to determine the maximum detection range of that radar. However, it is the energy in a radar pulse that determines maximum radar detection range. Since power is the rate of flow of energy, the energy in a radar pulse is equal to the peak power multiplied by the time the radar is transmitting, or pulse width (Equation 3-2). 3-4 Electronic Warfare Fundamentals Chapter 3. Radar Signal Characteristics Figure 3-6. Peak Power and Average Power Equation 3-2. Energy Per Pulse 8. AVERAGE POWER Average power is the power distributed over the pulse recurrence time. It can be computed using the formula in Figure 3-6. The energy transmitted by average power can be computed by multiplying average power by PRT. Since the energy in a set of pulses determines detection range, average power or energy provides a better measure of the detection range of a radar than does peak power. Average power can be increased by increasing the PRF, by increasing the pulse width, or by increasing peak power (Figure 3-7). 3-5 Chapter 3. Radar Signal Characteristics Electronic Warfare Fundamentals Figure 3-7. Radar Power and Energy 9. MODULATION The characteristics of an RF signal must be changed in order to transmit information on the signal. This process is called modulation. Modulation is accomplished by combining a basic RF signal, called a carrier wave, with a modulating signal that contains the desired information. The resulting waveform is then used to transmit the desired information. a. One basic modulation technique is amplitude modulation (AM). The carrier wave is combined with a modulating signal containing information of varying amplitude. Waveforms produced have the same frequency as the carrier wave but with a varying amplitude based on the information from the modulating signal. AM is used extensively in communications and broadcast radio transmissions (Figure 3-8). Figure 3-8. Amplitude Modulation 3-6 Electronic Warfare Fundamentals Chapter 3. Radar Signal Characteristics b. Frequency modulation (FM) is another means of impressing information on a carrier wave. Frequency modulation is accomplished by combining the carrier wave with a modulating signal containing information of varying frequency. The waveform produced has the same amplitude as the carrier wave, but the frequency varies based on the information from the modulating signal (Figure 3-9). FM is used extensively in communications and commercial radio. FM is also used with continuous wave (CW) radars to make them more resistant to jamming and to add range determination capability. Figure 3-9. Frequency Modulation c. A type of amplitude modulation known as pulse modulation (PM) is used in pulse radars to produce the short, powerful bursts of RF energy. PM combines the carrier wave with a rectangular pulse that acts like a switch. PM turns the transmitter on, leaves it on for a predetermined time, and then turns it off. The result is a waveform that produces radar pulses that can be used to measure range and angle to the target (Figure 3-10). Figure 3-10. Pulse Modulation 3-7 Chapter 3. Radar Signal Characteristics Electronic Warfare Fundamentals 10. SUMMARY The radar signal characteristics of PW, PRI, PRF, and power determine the maximum range and the range resolution capability of a specific radar. When combined with the frequency of the carrier wave of the radar signal, these parameters provide a unique signature to identify a specific radar signal. Modulation is the method used to put information on an RF carrier wave. The primary modulation techniques used in radar signal generation include amplitude, frequency, and pulse modulation. The radar signal characteristics of PRF, PRI, power, and modulation are the keys to understanding radar operation and jamming techniques. 3-8 Electronic Warfare Fundamentals Chapter 4. Radar System Components

Electronic Warfare Fundamentals PDF

Document Details

Tags

Related

Summary

Full Transcript

Upgrade to continue