When you connect to the fall arrest system?
Understand the Problem
The question is asking about the procedures or guidelines when connecting to a fall arrest system, which is likely related to safety practices in construction or working at heights.
Answer
Attach connecting devices to the back D-ring of the harness and the anchor point.
You connect to the fall arrest system by attaching the connecting devices (such as lanyards or self-retracting lifelines) to the back D-ring of the harness and to the hardware of the anchor point.
Answer for screen readers
You connect to the fall arrest system by attaching the connecting devices (such as lanyards or self-retracting lifelines) to the back D-ring of the harness and to the hardware of the anchor point.
More Information
It's crucial to ensure that the attachment point of the body harness is located in the center of the back near shoulder level to maximize safety and effectiveness.
Tips
A common mistake is attaching the system to inappropriate points like guardrails or hoists. Ensure proper connection to specified anchor points.
Sources
- 3 Components of a Personal Fall Arrest System - eSafety Training - esafety.com
- Personal Fall Arrest Systems (PFAS) - ehs.vt.edu
AI-generated content may contain errors. Please verify critical information
