Questions and Answers
What is the primary function of the motor-drive unit in regulating transformers?
What triggers the activation of the tap-change operation in the motor-drive unit?
What happens if a voltage interruption occurs during an on-load tap-change operation?
Under what condition can the next tap-change operation commence in the standard design?
Signup and view all the answers
How are the various basic designs of the TAPMOTION® ED identified?
Signup and view all the answers
What function does the reset wheel on the operations counter serve in the motor-drive unit?
Signup and view all the answers
Which element in the motor-drive unit is directly responsible for indicating the tap-change operation sequence?
Signup and view all the answers
What is the primary purpose of the indication field in the motor-drive unit?
Signup and view all the answers
Which component would NOT be found on the motor-drive unit as per the provided content?
Signup and view all the answers
What safety feature is provided with the hand-crank in the motor-drive unit?
Signup and view all the answers
What is the primary function of close-fitting work clothing?
Signup and view all the answers
Which type of personal protective equipment is specifically intended to protect the eyes?
Signup and view all the answers
Who is the manufacturer of the product detailed in the technical file?
Signup and view all the answers
What should never be worn during work to ensure safety?
Signup and view all the answers
What is included in the supporting documents apart from the technical file?
Signup and view all the answers
Which contact method is NOT mentioned for the manufacturer?
Signup and view all the answers
What is the role of safety shoes in personal protective equipment?
Signup and view all the answers
What is the correct procedure for accessing the technical file and its supporting documents?
Signup and view all the answers
Which personal protective equipment is used to protect against hearing damage?
Signup and view all the answers
How are warnings relating to sections formatted in the technical file?
Signup and view all the answers
When receiving a motor-drive unit, what is an important step to take before installation?
Signup and view all the answers
What should be done when using the technical file concerning legislation and standards?
Signup and view all the answers
What should protective gloves protect against?
Signup and view all the answers
How should parts be stored before installation according to safety practices?
Signup and view all the answers
What form does embedded warning information take in the technical file?
Signup and view all the answers
Which of the following is NOT a responsibility of personnel authorized to use the technical file?
Signup and view all the answers
What precaution should be taken to prevent serious injuries during the installation of the drive?
Signup and view all the answers
Which method is recommended for handling packaged goods to avoid damage?
Signup and view all the answers
What should you check after unpacking the packaged goods?
Signup and view all the answers
Why is it important to install the drive vertically aligned with the bevel gear?
Signup and view all the answers
What should be done before transporting the packaged crate?
Signup and view all the answers
What can result from not securing the stud bolts during installation?
Signup and view all the answers
How should the vibration damper be handled during the installation?
Signup and view all the answers
What is a potential hazard during the unpacking of packaged goods?
Signup and view all the answers
Drying the motor-drive unit will not cause damage to property.
Signup and view all the answers
It is acceptable to open the motor-drive unit during operation if an electrically skilled person is present.
Signup and view all the answers
Close-fitting work clothing has a high tearing strength.
Signup and view all the answers
Personal protective equipment should never be damaged before wearing.
Signup and view all the answers
Warning signs and safety information plates are important for the safety concept of the product.
Signup and view all the answers
Safety glasses are designed to protect the eyes from heat and flames.
Signup and view all the answers
Highly flammable or explosive gases should be present during maintenance work on the product.
Signup and view all the answers
Hearing protection is used to safeguard against mechanical hazards.
Signup and view all the answers
Reaching into the hand crank aperture during a tap-change operation is safe if the operation is being supervised.
Signup and view all the answers
A hard hat serves to protect the wearer from falling and flying parts.
Signup and view all the answers
Securing the motor-drive unit against unauthorized opening is an essential safety measure.
Signup and view all the answers
Before installation, parts of the motor-drive unit should be stored in a moist environment.
Signup and view all the answers
It is acceptable to perform maintenance on the product without checking the operational reliability of safety equipment.
Signup and view all the answers
The visor protects the face from splashing liquids and flying parts.
Signup and view all the answers
The technical file can be considered complete without any supporting documents.
Signup and view all the answers
All safety markings on the product should remain damaged for better visibility.
Signup and view all the answers
It is recommended to check the completeness of the shipment based on the product documentation after delivery.
Signup and view all the answers
Warnings relating to sections in the technical file provide detailed information about specific dangers.
Signup and view all the answers
Embedded warnings in the technical file refer to overall chapters.
Signup and view all the answers
The manufacturer of the product is Maschinenfabrik Reinhausen GmbH.
Signup and view all the answers
The technical file advises to keep supporting documents inaccessible for safety.
Signup and view all the answers
Safety instructions are included solely for the personnel who have no special training.
Signup and view all the answers
General legislation, standards, and guidelines should be disregarded when using the technical file.
Signup and view all the answers
Warnings in the technical file are only displayed in a standard font without any specific format.
Signup and view all the answers
Transporting the crate can be done when it is open.
Signup and view all the answers
External damage should be recorded in the shipping documents after acceptance of the shipment.
Signup and view all the answers
The carrier must countersign the shipping documents when damage is found.
Signup and view all the answers
Trained and authorized persons are allowed to secure loads during transportation.
Signup and view all the answers
Dropping or colliding with the product should be avoided only if it is heavy.
Signup and view all the answers
Before acceptance, every shipment must be checked for completeness and internal damage.
Signup and view all the answers
Severe external damage requires immediate notification of the manufacturer and relevant insurance.
Signup and view all the answers
Oscillation stress is an expected condition during transport, regardless of the transport method.
Signup and view all the answers
The cable type recommended for the control circuit is shielded.
Signup and view all the answers
Unshielded, separate cables are recommended for the tap-change supervisory control function.
Signup and view all the answers
The monitoring circuit for a temperature sensor should use shielded cables.
Signup and view all the answers
All circuitry that powers the motor-drive unit must be connected to an external protective device.
Signup and view all the answers
The power supply for the cross wiring between motor-drive units uses shielded cables.
Signup and view all the answers
Pulse circuits associated with raise/lower functions require an unshielded cable type.
Signup and view all the answers
The installation of electrics for the drive may proceed without any overcurrent protective device.
Signup and view all the answers
The tap-change supervisory control is categorized under signaling circuits.
Signup and view all the answers
Study Notes
Personal Protective Equipment (PPE)
- Always wear required PPE tailored for specific tasks.
- Do not use damaged PPE to prevent accidents.
- Familiarize with local PPE information provided in the work area.
Types of PPE and Their Functions
- Protective Clothing: Close-fitting, low tearing strength clothing that protects against machine parts.
- Safety Shoes: Guard against falling objects and slipping on wet surfaces.
- Safety Glasses: Shield eyes from flying debris and splashes.
- Visor: Protects the face from hazardous materials and splashes.
- Hard Hat: Prevents injuries from falling and flying objects.
- Hearing Protection: Essential for preventing hearing loss in noisy environments.
- Protective Gloves: Safeguard hands from mechanical, thermal, and electrical hazards.
Product Description of Motor-Drive Unit
- The motor-drive unit is packaged for moisture protection and includes product documentation.
- Verify shipment completeness using the shipping documents upon receiving.
- Store parts in a dry location pre-installation to maintain integrity.
- Technical documentation is designated for trained and authorized personnel only.
Manufacturer Information
- Manufacturer: Maschinenfabrik Reinhausen GmbH
- Address: Falkensteinstraße 8, 93059 Regensburg
- Contact: Tel: (+49) 9 41/40 90-0, Email: [email protected]
Completeness of Technical File
- The technical file is incomplete without additional supporting documents, including connection diagrams and routine test reports.
- Compliance with local regulations and safety standards is mandatory.
Hazard Communication
- Warnings are categorized into sections for clarity, indicating the type and source of danger with required actions.
Motor-Drive Unit Operation
- Adjusts operating position of on-load tap-changers based on specific requirements.
- Activation of tap-change operation is initiated by a control impulse from devices like the TAPCON®-series.
- If a voltage interruption occurs, the unit will complete the tap-change operation once power is restored.
Mounting the Motor-Drive Unit
- Prioritize safety by ensuring all components are de-energized before installation.
- Attach stud bolts to the transformer tank as specified in installation drawings.
- Ensure proper alignment of the drive to avoid mechanical damage during installation.
Manufacturer Information
- Maschinenfabrik Reinhausen GmbH located at Falkensteinstraße 8, 93059 Regensburg.
- Contact details include a telephone number: (+49) 9 41/40 90-0 and an email: [email protected].
- Additional product information and copies of the technical file can be obtained from the manufacturer.
Completeness of Technical File
- The technical file is incomplete without supporting documents such as connection diagrams and routine test reports.
- Compliance with legislation, standards, and safety guidelines relevant to accident prevention and environmental protection is necessary.
Safekeeping
- Maintain accessibility to the technical file and supporting documents for future reference.
Hazard Communication System
- Warnings in the file are categorized into:
- Warnings relating to sections: Indicate potential dangers, sources, and necessary actions.
- Embedded warning information: Specific warnings regarding parts within sections, e.g., not to dry the motor-drive unit due to malfunction risks.
Security Precautions
- Hand crank aperture presents a risk of injury; never reach into it during operation.
- Unauthorized opening of the motor-drive unit can lead to electric shocks; use a padlock for security.
- Open swing frames only by electrically skilled personnel to prevent electric shock risks.
Explosion Protection
- Avoid installation or maintenance in areas with explosive risks to prevent serious hazards.
Personal Protective Equipment (PPE)
- Recommended PPE includes:
- Close-fitting work clothing to avoid snags.
- Safety shoes for foot protection.
- Safety glasses and visors for eye and face protection.
- Hard hats against falling objects.
- Hearing protection for noise hazards.
- Protective gloves for mechanical, thermal, and electrical risks.
Product Description and Delivery
- Motor-drive unit shipped with moisture protection includes product documentation.
- Upon receiving, check for completeness according to shipping documents and store parts in a dry location.
Electrical Installation Safety
- Must connect drives to circuits with an external and all-pole isolating device to prevent electric hazards.
- Ensure protective devices for overcurrent protection in control circuits.
Transportation and Handling
- Transport the product securely; avoid moving unpacked or unsupported loads to prevent accidents.
- Inspect shipments upon receipt for completeness and damage, documenting any issues immediately.
Damage Reporting
- For visible transport damage, note it in shipping documents and inform the manufacturer and insurance if the damage is severe.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge on the importance of personal protective equipment (PPE) in the workplace. This quiz will cover the proper usage, maintenance, and guidelines for wearing protective clothing. Ensure you're aware of the best practices for safety on the job site.
