Semi Trailer Coupling Safety Quiz

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What should you do before coupling a tractor to a semi-trailer?

  • Hook up the air supply knob to lock the trailer brakes
  • Push in the trailer air supply valve
  • Hook up the emergency and service lines before backing under (correct)
  • Raise the front trailer supports with the crank handle secured in brackets

What should a driver do to prevent a jackknife while driving?

  • Use the hand valve before the brake pedal
  • Keep the cargo as low to the ground as possible
  • Go slow around turns (correct)
  • Push in the trailer air supply valve

What should a driver do if the fifth wheel locking lever is not locked after the jaws close around the kingpin?

  • Ignore it and proceed with driving
  • Fix the coupling before driving a coupled unit (correct)
  • Try to manually lock the fifth wheel locking lever
  • Drive away cautiously and monitor the situation

What should a driver do once they have pushed in the trailer supply and before moving the tractor unit?

<p>Wait until the air system is at normal pressure (D)</p> Signup and view all the answers

What should you expect to happen if the trailer breaks away and pulls apart both airlines?

<p>The trailer brake comes on and the tractor protection valve closes (A)</p> Signup and view all the answers

What should be done after coupling to check the connection?

<p>Pulling the tractor ahead gently with the trailer brakes locked (C)</p> Signup and view all the answers

How should you test the tractor semi-trailer connection for security?

<p>By pulling forward gently in a low gear against the locked trailer brakes and then visually inspecting (A)</p> Signup and view all the answers

What should you do to keep dirt and water out of the lines when not towing a trailer?

<p>Lock the tractor glad hands to each other (or dummy couplers) (C)</p> Signup and view all the answers

What must be over the locking lever for a coupling to be complete?

<p>The safety latch for the fifth wheel locking lever (A)</p> Signup and view all the answers

What is used to test the trailer brakes?

<p>The hand valve (C)</p> Signup and view all the answers

Flashcards are hidden until you start studying

More Like This

Use Quizgecko on...
Browser
Browser