11 Questions
What is the first step in cleaning the SCBA?
Remove the facepiece from the regulator and the cylinder from the SCBA harness
Why is it important to avoid getting soap and debris inside the regulator?
To prevent damage to the regulator
What is the purpose of rinsing the facepiece and regulator with clean water?
To remove any remaining debris
When should you consult the manufacturer's recommendations for cleaning solutions and methods?
When cleaning the cylinder and harness
What is the final step in the process of cleaning the SCBA?
Reassemble the unit before placing back into service
What is the first step in inspecting an SCBA?
Ensure all components of the SCBA are present
How often should composite and fiberglass cylinders undergo a hydrostatic test?
Every 3 years
What is the minimum air pressure required in an SCBA cylinder?
90% full
What should be inspected on the facepiece during an SCBA inspection?
Cleanliness, damage, and head straps
What is the purpose of fully opening the cylinder valve during an SCBA inspection?
To confirm the low pressure alarm
What should be inspected on the low pressure regulator during an SCBA inspection?
Cleanliness, defects, and o-rings
Test your knowledge on the steps to inspect and maintain a Self-Contained Breathing Apparatus (SCBA) including checking for components, wear and damage, and replacing parts as needed. Learn about the importance of proper maintenance for safety and efficiency.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
