Podcast
Play an AI-generated podcast conversation about this lesson
Questions and Answers
What are the three components of the PASS device on the G1 SCBA?
What are the three components of the PASS device on the G1 SCBA?
- Battery Module, Power Module, Control Module (correct)
- Battery Module, Display Module, Control Module
- Sensor Module, Communication Module, Control Module
- Display Module, Power Module, Sensor Module
How long does the PASS device wait before going into full alarm due to motionlessness?
How long does the PASS device wait before going into full alarm due to motionlessness?
- 40 seconds
- 10 seconds
- 20 seconds
- 30 seconds (correct)
What does the G1 Speaker Module do?
What does the G1 Speaker Module do?
- Amplifies and clarifies speech from the face piece (correct)
- Monitors battery status
- Detects motion
- Amplifies ambient noise
How can the status of the battery be checked without powering on the SCBA?
How can the status of the battery be checked without powering on the SCBA?
Signup and view all the answers
What type of battery powers the MSA G1 SCBA?
What type of battery powers the MSA G1 SCBA?
Signup and view all the answers
What indicates that the battery needs to be changed?
What indicates that the battery needs to be changed?
Signup and view all the answers
Flashcards are hidden until you start studying
Study Notes
PASS Device
- Consists of three components: Battery Module, Power Module, and Control Module
- Monitors user movement through a motion sensor
- Enters pre-alarm mode after 20 seconds of being motionless
- Enters full alarm mode after 30 seconds of being motionless to alert others
G1 Speaker Module
- Amplifies and clarifies speech from the face piece during use
- Does not amplify breathing sounds when inhaling
- Turns off when the complete SCBA is turned off
- Can be activated/deactivated with a button, with a beep confirmation
Battery
- Powered by a rechargeable Lithium Ion battery
- Provides 6-8 hours of continuous use with all features active
- Battery status can be checked without powering on SCBA
- Battery level indicator: green (normal), yellow (2 hours remaining), red (critical)
- Requires 4-6 hours to fully charge
- Removal tool is located on the shoulder
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
