Responsibilities of Engineers and Personnel in Exposure Reduction Process

Play an AI-generated podcast conversation about this lesson

What is the purpose of the Preliminary Exposure Reduction Process of PPE?

To clean contaminated PPE off-site

To repair damaged PPE

To reduce exposure to contaminants on the PPE (correct)

To inspect PPE components

Why should firefighters exiting the emergency scene remain on air until the Preliminary Exposure Reduction Process is completed?

To prevent contaminants from splashing onto their face (correct)

To enhance visibility of the firefighter

To dry off the wet PPE quickly

To avoid repairs needed on PPE

What is the correct order of steps in the Preliminary Exposure Reduction Process wet line?

Charge hose, apply detergent, secure pockets, dampen turnouts

Dampen turnouts, secure pockets, charge hose, apply detergent (correct)

Apply detergent, dampen turnouts, secure pockets, charge hose

Secure pockets, dampen turnouts, apply detergent, charge hose

Which type of spray/mist is recommended for dampening the firefighter turnouts during the Preliminary Exposure Reduction Process?

Soft spray/mist Signup and view all the answers

Why are all pockets and flaps of gear required to be closed and secured before starting the Preliminary Exposure Reduction Process?

To prevent contaminants from getting inside Signup and view all the answers

What is the main reason for applying NFPA 1851 compliant detergent to visibly soiled portions of the PPE?

To comply with cleaning standards Signup and view all the answers

What scenario justifies firefighters not staying on air during the Preliminary Exposure Reduction Process?

'SCBA malfunction or out of supplied air' Signup and view all the answers

'Assure all pockets and flaps of gear are closed and secured' is primarily done to:

'Prevent contaminant entry into gear' Signup and view all the answers

What is the correct order for doffing the personal protective equipment (PPE) according to the text?

Doff helmet, gloves, face mask, air pack, turnout jacket, hood, bunker pants, and boots Signup and view all the answers

What is the purpose of wiping the face mask and SCBA regulator with 3M compliant mask wipes?

To prevent fogging on the equipment Signup and view all the answers

Why should personnel continue using downward strokes with a soft bristled brush and/or towel during the decontamination process?

To avoid damaging the PPE materials Signup and view all the answers

When should personnel remain on air during the dry Preliminary Exposure Reduction Process?

Throughout the process Signup and view all the answers

Why is it important to assure all pockets and flaps of gear are closed and secured before beginning decontamination?

To prevent any debris from entering the gear Signup and view all the answers

What are some potential safety hazards mentioned in the text due to wet decontamination procedures during cold weather?

Hypothermia Signup and view all the answers

What is the purpose of wiping face, neck, arms, and hands with Rescue Wipes as mentioned in the text?

To remove soot and contaminants Signup and view all the answers

Why do personnel need to use a damp towel to wipe away debris from the helmet, face piece, and SCBA regulator?

To prevent damage to the PPE materials Signup and view all the answers

What is the responsibility of all engineers according to the text?

Establish the Preliminary Exposure Reduction Process Signup and view all the answers

When should personnel ensure they have completed the Preliminary Exposure Reduction Process?

Before removing the face piece of the PPE ensemble Signup and view all the answers

What should personnel do after exposure to an event that may have soiled or damaged PPE?

Initiate contamination reduction Signup and view all the answers

Which protective gear is required for personnel performing the Contamination Reduction Process and preparing PPE for logistics?

Eye protection, N-95 respirator, Nitrile gloves Signup and view all the answers

What process should be conducted on-scene before removing the face piece of the protective ensemble if PPE is exposed to products of combustion?

Preliminary Exposure Reduction Process Signup and view all the answers

When should universal precautions be used according to the text?

During contamination reduction processes Signup and view all the answers

Who should be contacted for proper incident decontamination in case of suspected hazardous materials exposure?

Hazmat Team Signup and view all the answers

What should you do to dry the mask and regulator?

Hang to air dry completely Signup and view all the answers

When should PPE be sent for Specialized Cleaning?

When it has visible soiling Signup and view all the answers

Which color of PPE tag should be used when sending items for cleaning or repairs?

Green Signup and view all the answers

What should be done with gear contaminated with biological material?

Enclose in a bio bag and use green PPE tags Signup and view all the answers

What should be done if PPE items are not picked up by support personnel?

Contact logistics for pick up Signup and view all the answers

What is the purpose of disassembling PPE garments during Specialized Cleaning?

To remove the inner liner from the outer liner for cleaning Signup and view all the answers

Why is it important to fill out the PPE tags completely when sending items for cleaning?

To provide detailed instructions to the cleaners Signup and view all the answers

What is the correct order for doffing the Personal Protective Equipment (PPE)?

Doff SCBA harness, jacket, hood, pants, and boots in a specific order. Signup and view all the answers

What should be done with contaminated PPE before returning to the station?

Place it in trash bags in an outside compartment. Signup and view all the answers

Why is using a dirty firefighting hood never acceptable?

It can lead to cross-contamination and exposure to contaminants. Signup and view all the answers

What is the purpose of using Rescue Wipes according to the text?

To clean soot from face, throat, neck, jaw, and underarms during rehab activities. Signup and view all the answers

What is expected of each member regarding obtaining clean hoods?

To maintain a clean hood after removing a contaminated one. Signup and view all the answers

When should preliminary exposure reduction processed turnouts be redonned according to the text?

To accomplish on-scene objectives or post-rehab assignments. Signup and view all the answers

What must not be allowed inside the cab under any circumstance?

'Non-bagged exposed / contaminated PPE'. Signup and view all the answers

'The Air Resource will have clean hoods'. What does this imply?

'Clean hoods' are mandatory for all members to possess individually. Signup and view all the answers