4AE3 U3 C3 Obj 3

Play an AI-generated podcast conversation about this lesson

Which Act deals with generalities and permits the Regulations it references to be enforceable?

Safety Codes Act

Power Engineer's Regulations

Acts (correct)

Boiler/Pressure Vessel/Pressure Plant Regulations

Where can you find information about Power Engineer certification, responsibilities, and supervisory requirements in Alberta?

Pressure Welders Regulation

Power Engineer's Regulations (correct)

Safety Codes Act

Boiler/Pressure Vessel/Pressure Plant Regulations

Which types of equipment are exempt from the provisions of the Act and/or the Regulation(s)?

Boiler and pressure equipment (correct)

Existing codes

Shift engineer, types of certificates, and plant descriptions

Pressure welders

Which committee develops and modifies codes and standards?

Jurisdiction representatives Signup and view all the answers

Who approves equipment designs before they can be used in a jurisdiction?

Chief Inspectors Signup and view all the answers

What do the regulations stipulate fees for?

Registering weld procedures Signup and view all the answers

Which staff position is required to have a certificate of competency of not less than one class lower than the plant classification?

Shift Engineer Signup and view all the answers

According to the text, what is required for a candidate to apply for a certificate of competency one class higher than their current certificate?

Providing proof of operating time and education Signup and view all the answers

According to the text, what is the penalty for candidates who do not observe the restrictions on code books and calculators during an exam?

They will be penalized, as noted in the regulations Signup and view all the answers

According to the text, what is the purpose of the welder performance qualification test?

To evaluate the candidate's welding skills Signup and view all the answers

According to the text, what is required for pressure welders to re-qualify?

Retaking a performance qualification practical test Signup and view all the answers

Which Act does not deal with Power Engineer certification, responsibilities, or supervisory requirements in Alberta?

Safety Codes Act Signup and view all the answers

Where can you find the requirements for Pressure Welders in Ontario and Manitoba?

Boiler/Pressure Vessel/Pressure Plant Regulations Signup and view all the answers

Which types of codes are adopted by the Jurisdictions to standardize requirements across Canada?

API codes Signup and view all the answers

According to the text, who must review and approve the manufacturer's design drawings and calculations for equipment or fittings?

The Chief Inspector or designate Signup and view all the answers

What is the purpose of the construction inspections mentioned in the text?

To ensure compliance during construction Signup and view all the answers

According to the text, which staff position must display their certificates in an operating area of the plant?

Chief Engineer Signup and view all the answers

According to the text, what is required for a person to qualify to take the exam for a certificate of competency?

Both previous work experience and education Signup and view all the answers

Which type of certificate must a candidate already hold in order to apply for a certificate of competency one class higher?

A certificate of competency two classes lower Signup and view all the answers

According to the regulations, what is required for a candidate to qualify to take the welder performance qualification test?

Meeting the requirements set out in the regulations Signup and view all the answers

Which of the following fees are listed in the regulations?

All of the above Signup and view all the answers

According to the text, what is the purpose of the unique symbol that pressure welders are required to identify their weldments with?

To provide traceability Signup and view all the answers

Which of the following is true about the Regulations governing Power Engineers and Pressure Welders?

The Regulations provide more specific instructions than the Acts. Signup and view all the answers

Where can the requirements for Pressure Welders be found in Alberta?

In the Pressure Welders Regulation Signup and view all the answers

What is the purpose of adopting existing codes, such as CSA, ASME, NFPA, and API codes?

To simplify the requirements across Canada Signup and view all the answers

According to the text, who is responsible for reviewing and approving the manufacturer's design drawings and calculations for equipment or fittings?

The Chief Inspector Signup and view all the answers

According to the text, what is the purpose of the welder performance qualification test?

To assess a welder's ability to perform specific welding tasks Signup and view all the answers

According to the text, which committee develops and modifies codes and standards?

The committee with representatives from each Jurisdiction Signup and view all the answers

According to the text, which staff position must display their certificates in an operating area of the plant?

Chief Engineer Signup and view all the answers

Which of the following is NOT mentioned as part of the requirements for applying for a certificate of competency one class higher?

Credits for a Power Engineering Diploma Signup and view all the answers

According to the regulations, which of the following is considered illegal?

All of the above Signup and view all the answers

What is the purpose of the performance qualification practical test for welders?

To determine eligibility for a certificate of competency Signup and view all the answers

Which of the following fees are listed in the regulations?

All of the above Signup and view all the answers

4AE3 U3 C3 Obj 3

Podcast

Questions and Answers

Which Act deals with generalities and permits the Regulations it references to be enforceable?

Where can you find information about Power Engineer certification, responsibilities, and supervisory requirements in Alberta?

Which types of equipment are exempt from the provisions of the Act and/or the Regulation(s)?

Which committee develops and modifies codes and standards?

Who approves equipment designs before they can be used in a jurisdiction?

What do the regulations stipulate fees for?

Which staff position is required to have a certificate of competency of not less than one class lower than the plant classification?

According to the text, what is required for a candidate to apply for a certificate of competency one class higher than their current certificate?

According to the text, what is the penalty for candidates who do not observe the restrictions on code books and calculators during an exam?

According to the text, what is the purpose of the welder performance qualification test?

According to the text, what is required for pressure welders to re-qualify?

Which Act does not deal with Power Engineer certification, responsibilities, or supervisory requirements in Alberta?

Where can you find the requirements for Pressure Welders in Ontario and Manitoba?

Which types of codes are adopted by the Jurisdictions to standardize requirements across Canada?

According to the text, who must review and approve the manufacturer's design drawings and calculations for equipment or fittings?

What is the purpose of the construction inspections mentioned in the text?

According to the text, which staff position must display their certificates in an operating area of the plant?

According to the text, what is required for a person to qualify to take the exam for a certificate of competency?

Which type of certificate must a candidate already hold in order to apply for a certificate of competency one class higher?

According to the regulations, what is required for a candidate to qualify to take the welder performance qualification test?

Which of the following fees are listed in the regulations?

According to the text, what is the purpose of the unique symbol that pressure welders are required to identify their weldments with?

Which of the following is true about the Regulations governing Power Engineers and Pressure Welders?

Where can the requirements for Pressure Welders be found in Alberta?

What is the purpose of adopting existing codes, such as CSA, ASME, NFPA, and API codes?

According to the text, who is responsible for reviewing and approving the manufacturer's design drawings and calculations for equipment or fittings?

According to the text, what is the purpose of the welder performance qualification test?

According to the text, which committee develops and modifies codes and standards?

According to the text, which staff position must display their certificates in an operating area of the plant?

Which of the following is NOT mentioned as part of the requirements for applying for a certificate of competency one class higher?

According to the regulations, which of the following is considered illegal?

What is the purpose of the performance qualification practical test for welders?

Which of the following fees are listed in the regulations?

More Like This

4AE3 U3 C3 Obj 1

4AE3 U3 C3 Obj 6

4AE3 U3 C3 Obj 7

4AE3 U3 C3 Obj 8