Radar Control Panel Functions Quiz

<p>The radar is in a low-power mode, but ready to be activated at any time. (D)</p> Signup and view all the answers

<p>96 nautical miles (NM) (C)</p> Signup and view all the answers

<p>A cursor which can be moved to a desired location on the screen. (C)</p> Signup and view all the answers

<p>It determines the duration of the radar's transmission pulse. (B)</p> Signup and view all the answers

<p>It governs the communication exchange between the radar system and other systems. (C)</p> Signup and view all the answers

<p>After the radar system has completed its initial pre-heating stage. (A)</p> Signup and view all the answers

<p>The starting point returns to the CCRP position. (B)</p> Signup and view all the answers

<p>Connection of a navigator. (D)</p> Signup and view all the answers

<p>Edge of Display (C)</p> Signup and view all the answers

<p>By clicking the button to toggle On/Off. (A)</p> Signup and view all the answers

<p>It confirms the operation right and automatically saves settings. (A)</p> Signup and view all the answers

<p>To adjust the transmitter's frequency. (B)</p> Signup and view all the answers

<p>The [PWR ACK] key acknowledges power supply abnormalities, while the [ALARM ACK] key acknowledges various alarms like failure, approaching target, and collision alarms. (B)</p> Signup and view all the answers

<p>Both A and B. (B)</p> Signup and view all the answers

<p>[TUNE] (A)</p> Signup and view all the answers

<p>The user can stop all alarm sounds by pressing the [ALARM ACK] key simultaneously. (C)</p> Signup and view all the answers

<p>To toggle between various cursor modes (A)</p> Signup and view all the answers

<p>EBL1 adjustment (A)</p> Signup and view all the answers

<p>Changing the mark font or line pattern (C)</p> Signup and view all the answers

<p>It alters the starting point for the parallel index line (C)</p> Signup and view all the answers

<p>It toggles the display mode of EBL2 values (A)</p> Signup and view all the answers

<p>VRM2 adjustment (C)</p> Signup and view all the answers

<p>The starting point for EBL1 is changed (B)</p> Signup and view all the answers

<p>It modifies the marking line or font appearance (C)</p> Signup and view all the answers

<p>EBL1 adjustment (B)</p> Signup and view all the answers

<p>The numeric value of VRM1 (A)</p> Signup and view all the answers

<p>The mode switches to ENH Level1 (B)</p> Signup and view all the answers

<p>PROC Off (D)</p> Signup and view all the answers

<p>Opens the function registration menu (B)</p> Signup and view all the answers

<p>Fishnet (B), Storm (C)</p> Signup and view all the answers

<p>It also switches to automatic mode (D)</p> Signup and view all the answers

<p>The gain and suppression settings (D)</p> Signup and view all the answers

<p>Reverts to ENH Off (D)</p> Signup and view all the answers

<p>FUNC Off (C)</p> Signup and view all the answers

<p>Bar on the left side (B)</p> Signup and view all the answers

<p>Peak Hold (B)</p> Signup and view all the answers

Activates the equipment and controls power supply.

Acknowledges power supply abnormalities; requires external battery.

Starts transmission when pressed; puts equipment on standby during transmission.

Acknowledges various alarms and silences alarm sounds when pressed.

Tunes a transmitter; switches between manual and automatic modes.

Suppresses rain/snow clutter; adjusts effect by turning dial.

Suppresses sea clutter; increases effect by turning dial.

Adjusts the observation range scale from 0.125NM to 96NM.

Controls the display of fixed range markers, toggling between On and Off.

Changes between true motion (TM) and relative motion (RM) radar trails.

Moves the ship's position to the cursor location on the display.

Toggle between preheat mode (when powered on) and standby mode.

Adjusts the duration of the transmission pulses for radar signals.

Changes how direction (azimuth) is displayed on the radar screen.

Switches connections between different radar systems or inputs.

Displays fixed intervals for the observation range when enabled.

Switches between manual and automatic settings.

Locks the starting position to the cursor's latitude/longitude when left-clicked.

Automatically resets the starting point back to CCRP if moved off-screen.

Toggles the display of parallel index lines On/Off and opens the operation menu.

Switches the starting point between CCRP or another position on the radar screen.

Gains operation rights upon clicking the parallel index line button.

Changes cursor function mode upon button press. Modes include AUTO, ACQ TT, ACT AIS, etc.

Switches the appearance of line patterns or fonts for marks when active.

Adjusts the Electronic Bearing Line 1 for better navigation.

Sets up the Variable Range Marker 1 on the display.

Adjusts the Electronic Bearing Line 2 for navigation.

Sets the Variable Range Marker 2 for distance measurement.

Displays the numeric value for EBL1, shown as true or relative.

Displays numeric value for EBL2, similarly indicated as true or relative.

Shows the bearing value of the current cursor position.