Pavement Construction - Item 310 Quiz
37 Questions
3 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the quantity of Class B cement required per cubic meter of concrete?

  • 9.5 bags
  • 11 bags
  • 9 bags
  • 8 bags (correct)
  • For Class P fine aggregates, what is the required quantity per cubic meter of concrete when using angular/crushed aggregate?

  • 0.54 m2
  • 0.52 m2
  • 0.47 m2 (correct)
  • 0.44 m2
  • How many bags of Class A cement are needed for 3,000 psi concrete per cubic meter?

  • 10 bags
  • 11 bags
  • 9 bags (correct)
  • 8 bags
  • What type of quality test is necessary for Class B fine aggregates that have not been previously tested?

    <p>Elutriation – wash Test</p> Signup and view all the answers

    What is the required quality test frequency for every 1,500 m3 of fine aggregates that passed a previous quality test?

    <p>1 Q Test</p> Signup and view all the answers

    What test is required for every 300 m$^3$ of material?

    <p>Plasticity Test</p> Signup and view all the answers

    How many in-situ density tests are needed for each 500 m$^2$ when evaluating compacted depth?

    <p>One group of three</p> Signup and view all the answers

    What minimum percentage of lime should be added to dry soil aggregates?

    <p>3-12 mass percent</p> Signup and view all the answers

    Which test is conducted for every 1,500 m$^3$ of material when dealing with crushed aggregate?

    <p>Fractured Face Test</p> Signup and view all the answers

    How many tests are required for every layer of 150 mm of compacted depth?

    <p>One density test and one thickness determination test</p> Signup and view all the answers

    What type of test is the Quality Test (Q)?

    <p>Grading, Plasticity, and Abrasion Test</p> Signup and view all the answers

    Which test is NOT associated with the Lime Stabilized Road Mix Base Course?

    <p>California Bearing Test</p> Signup and view all the answers

    In performing compaction tests for every 1,500 m$^3$, which test is mandatory?

    <p>Laboratory Compaction Test</p> Signup and view all the answers

    What is the required quantity of bituminous material in a bituminous concrete surface course?

    <p>5 to 8 mass percent of total mix</p> Signup and view all the answers

    What is the testing requirement for cement in Portland cement concrete pavement?

    <p>1 – Q, Quality Test for every 2,000 bags</p> Signup and view all the answers

    What type of aggregates require 0.54 m2/m3 concrete when used in Portland cement concrete?

    <p>Angular or crushed coarse aggregate</p> Signup and view all the answers

    Which test is performed for fine aggregate if a source has previously tested and passed?

    <p>1 – Q, Quality Test including several parameters</p> Signup and view all the answers

    For which material does Portland cement concrete pavement specify a quantity of 9.0 bags/m3?

    <p>Cement</p> Signup and view all the answers

    How often should a Quality Test be conducted for a fine aggregate source that has failed a previous quality test?

    <p>1 test for every 1,500 m3</p> Signup and view all the answers

    What is the required testing frequency for hydrated lime in compacted pavement?

    <p>Same as for Item 307</p> Signup and view all the answers

    Which quality test is performed on the mineral filler in a bituminous concrete surface course?

    <p>Quality Test for each 40T or 200 drums</p> Signup and view all the answers

    What is the required quantity of bituminous materials for a seal coat application?

    <p>0.2 to 1.5 L/m2</p> Signup and view all the answers

    How often should a quality test be conducted for bituminous materials?

    <p>For every 40T or 200 drums</p> Signup and view all the answers

    What is the grading test requirement for cover aggregates in a seal coat?

    <p>For every 75 m3/200 kg</p> Signup and view all the answers

    What is the quantity range for aggregates when using emulsified asphalt in surface treatment?

    <p>13.6 to 19.04 kg/m2</p> Signup and view all the answers

    Which of the following is NOT a requirement for bituminous surface treatment materials?

    <p>Plasticity test for every 40T</p> Signup and view all the answers

    What is the range of cover aggregate quantity for bituminous penetration macadam pavement?

    <p>8 kg/m2</p> Signup and view all the answers

    Which quantity is applicable for bituminous materials when using cut-back asphalt?

    <p>1.58 to 2.04 L/m2</p> Signup and view all the answers

    What is the required quantity of aggregates when using rapid curing emulsified asphalt in bituminous pavement?

    <p>8 kg/m2</p> Signup and view all the answers

    What is the minimum number of pipes required for a Quality Test for non-reinforced concrete pipes?

    <p>Two pipes for each size but not less than 0.5% of the total</p> Signup and view all the answers

    What is the alternative requirement for compressive strength testing in the field for concrete pipes?

    <p>One set of three concrete cylinder samples for up to twenty-five pipes</p> Signup and view all the answers

    How does the testing requirement for clay pipes differ from that of concrete pipes?

    <p>Quality Test for one pipe for every 200 pieces</p> Signup and view all the answers

    What does the testing for mortar and joint filler require?

    <p>Same testing as for Item 405</p> Signup and view all the answers

    What is the testing requirement for lids, cast iron frames, and grating?

    <p>A visual inspection report</p> Signup and view all the answers

    For drainage steel grating with frames, what is the size specification compared to the nominal sizes?

    <p>15 mm larger than nominal sizes</p> Signup and view all the answers

    What is the maximum number of pipes that can be inspected for compressive strength testing at once?

    <p>Twenty-five pipes</p> Signup and view all the answers

    What is represented in the quality test for one pipe among each specified size?

    <p>Strength, Absorption, and Dimension</p> Signup and view all the answers

    Study Notes

    Compact Pavement and Bituminous Concrete Surface Course

    • Compacted Pavement: Testing procedures correspond to those outlined in Item 307.
    • Bituminous Concrete Surface Course: Involves constructing a hot-laid surface with aggregates, mineral filler, and bituminous material.
    • Bituminous Materials: Quantity required is between 5 to 8 mass percent of the total mix; a quality test per every 40 tons or fraction thereof is mandated.

    Portland Cement Concrete Pavement

    • Cement Quantity: 9.0 bags of cement per cubic meter (40 kg/bag); quality tests required at intervals of 2,000 bags.
    • Fine Aggregate: Varies based on aggregate type—0.50 m²/m³ for rounded, 0.54 m²/m³ for angular/crushed; testing frequency based on volume of concrete.
    • Comprehensive Testing: Includes grading, plasticity, CBR, and density tests based on the volume of mixed concrete and compacting depth.

    Crushed Aggregate Base Course

    • Material Composition: Requires crushed gravel, stone, or rock on prepared substrate.
    • Testing: Same procedures as Item 201 with additional fractured face tests at specified volumes.

    Lime Stabilized Road Mix Base Course

    • Foundation Composition: Combines soil aggregates with lime (3-12 mass percent) and water.
    • Testing Protocols:
      • Grading and plasticity tests per volume, focusing on quality assurance.
      • Field density tests and thickness determination for compacted layers.

    Bituminous Seal Coat

    • Application: Involves applying bituminous material potentially with aggregate on existing surfaces.
    • Materials Quantity: Bituminous materials range from 0.2 to 1.5 L/m² with specific weight ranges for cover aggregates.
    • Testing for Aggregates: Grading tests every 75 m³ or fraction thereof.

    Bituminous Surface Treatment

    • Procedure: Consists of applying a single or double layer of bituminous materials followed by aggregate spreading.
    • Aggregate Usage: Quantities vary based on asphalt type, with specific testing for grading and plasticity required at designated volumes.

    Bituminous Penetration Macadam Pavement

    • Layer Composition: Involves crushed aggregates with specified quantities for each layer and application of bituminous materials.
    • Testing for Quality: Includes quality tests per volume and grading assessments based on previous testing results.

    Underdrains

    • Components: Constructed from pipe and granular filter materials for effective drainage.
    • Testing Protocols: Quality tests for concrete and clay pipes, ensuring structural integrity and dimensional accuracy.

    Manholes, Inlets, and Catchbasins

    • Construction Practices: Involve building or adjusting drainage structures from concrete.
    • Quality Assurance: Tests follow Item 405 specifications with additional requirements for lids and frames through inspection.

    Drainage Steel Grating with Frame

    • Design Specifications: Steel frames must exceed nominal sizes of standard industry pits by 15 mm, ensuring effective drainage functionality.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Test your knowledge on the construction of bituminous concrete surface courses as outlined in Item 310. This quiz covers the essential components, materials, and testing procedures involved in creating a durable pavement. Perfect for students and professionals in civil engineering and construction management.

    More Like This

    Bituminous Mix Design Registration
    15 questions
    Bituminous Materials in Road Construction
    12 questions
    Use Quizgecko on...
    Browser
    Browser