New Lenox Fire Protection District Driver Training
32 Questions
0 Views

New Lenox Fire Protection District Driver Training

Created by
@TopnotchForsythia

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the primary purpose of the driver training policy for New Lenox Fire Protection District members?

  • To enhance safety for members and the public (correct)
  • To allow new members to drive without certification
  • To reduce training costs for the department
  • To limit the number of vehicles in operation
  • Which organization’s standards must the training meet or exceed for those operating firefighting apparatus?

  • International Emergency Services Association
  • National Fire Safety Council
  • National Fire Protection Association (NFPA) (correct)
  • American Firefighters Association
  • What type of certification is required for individuals driving emergency vehicles that are not fire apparatus?

  • Advanced Driving Skills Certification
  • Fire Service Vehicle Operator (FSVO) (correct)
  • Certified Emergency Vehicle Operator (CEVO)
  • Basic Firefighter Certification
  • What is the required status for someone to be considered an Ambulance Driver in New Lenox FPD?

    <p>Completion of all training requirements for ambulances</p> Signup and view all the answers

    Who must complete an orientation on the operation of the brush truck?

    <p>Drivers cleared as ambulance operators</p> Signup and view all the answers

    What requirement must district members fulfill to continue driving apparatus annually?

    <p>Complete a review of operational skills</p> Signup and view all the answers

    Which type of driver requires specific training to operate department authorized emergency vehicles?

    <p>Staff response vehicles only</p> Signup and view all the answers

    What is the significance of ensuring drivers are educated on the apparatus they operate during emergencies?

    <p>To ensure safety for personnel and the public</p> Signup and view all the answers

    What is the minimum requirement for a driver to obtain a Class C license according to the prerequisites?

    <p>Must possess a valid State of Illinois Class-C Non-CDL permit prior to employment.</p> Signup and view all the answers

    Which of the following accurately describes the status of an Engineer?

    <p>An Engineer has been cleared to drive all types of NLFD vehicles.</p> Signup and view all the answers

    What is one of the requirements to become a Tender Operator?

    <p>Complete tender drive time and all necessary training.</p> Signup and view all the answers

    What must occur if a member's driving license is expired, suspended, or revoked?

    <p>The member must notify the Battalion Chief immediately.</p> Signup and view all the answers

    What training is required for personnel to drive an ambulance?

    <p>Must satisfy all JPR’s with an ambulance and complete specific drive time.</p> Signup and view all the answers

    Which status does NOT require previous experience as an Engineer?

    <p>Tender Operator</p> Signup and view all the answers

    How will license expirations be monitored according to the regulations?

    <p>Tracked on Target Solutions by the Training Officer.</p> Signup and view all the answers

    What is a requirement to become a certified Ambulance Driver?

    <p>Becoming certified as a Fire Service Vehicle Operator through the OSFM.</p> Signup and view all the answers

    What is the minimum drive time required on engine/pumper apparatus for personnel?

    <p>12 hours</p> Signup and view all the answers

    What is a prerequisite for driving any New Lenox FPD aerial apparatus?

    <p>Served as an Engine Operator for 6 months</p> Signup and view all the answers

    Which of the following is not required to drive the New Lenox FPD tender apparatus?

    <p>Certification in Fire Apparatus Engineer</p> Signup and view all the answers

    How many hours of drive time must be spent on pumper apparatus other than the last 4 hours?

    <p>8 hours</p> Signup and view all the answers

    What documentation is required by the engine lieutenant after completing driver training?

    <p>Final Engine/Pumper Training Sign-Off</p> Signup and view all the answers

    Who is responsible for notifying the administration once training is verified?

    <p>The training officer</p> Signup and view all the answers

    Which document must contain all requirements and hours for aerial apparatus training?

    <p>Target Solutions documentation</p> Signup and view all the answers

    What is the required driver’s license for operating an engine/pumper apparatus?

    <p>Illinois Class B (non-CDL) driver’s license</p> Signup and view all the answers

    What is the time frame allowed for a firefighter to complete all practical evolutions and drive time for the initial driving program?

    <p>One year</p> Signup and view all the answers

    What documentation must be submitted by the tender lieutenant after completing all requirements and hours?

    <p>Final Tender Training Sign-Off</p> Signup and view all the answers

    What happens if an operator has not recertified by January 1?

    <p>They will be downgraded or removed as a vehicle operator</p> Signup and view all the answers

    Which re-certification requirement is common to both Engine Operators and Tender Operators?

    <p>Completion of an FSVO cone course</p> Signup and view all the answers

    What is the minimum total drive time required for an Engineer to recertify?

    <p>12 hours</p> Signup and view all the answers

    Which individual is responsible for verifying all training before administration is notified?

    <p>The training officer</p> Signup and view all the answers

    What type of drive time must be documented to successfully recertify as a Truck Operator?

    <p>Non-emergency driving time</p> Signup and view all the answers

    Who may alter components and requirements of the guidelines provided?

    <p>Both the Fire Chief and the Training Officer</p> Signup and view all the answers

    Study Notes

    Driver Training Overview

    • Aims to enhance safety for members and the public through proper training for operating emergency vehicles.
    • Establishes minimum training standards for personnel driving district apparatus and outlines certification requirements.

    Policy & Compliance

    • Members operating emergency vehicles must complete training meeting or exceeding National Fire Protection Association (NFPA) standards or hold Illinois OSFM certification.
    • Required training ensures competent operational and driving skills for all fire apparatus and authorized emergency vehicles.

    Status Definitions

    • Ambulance Driver: Completed training to operate ambulances.
    • Brush Truck Driver: Cleared ambulance operator with brush truck orientation.
    • Engine Operator: Certified by Illinois OSFM as Fire Service Vehicle Operator after meeting job performance requirements (JPR).
    • Tender Operator: Completed necessary training to operate tender vehicles.
    • Truck Operator: Must be an engineer for at least 6 months and fulfilled training requirements.
    • Engineer: Cleared to drive all New Lenox Fire Protection District vehicles.

    Prerequisites for Driving

    • Personnel must possess a valid Illinois Class-C (minimum) non-CDL driver’s permit before starting apparatus driving programs.
    • Expired or suspended licenses must be reported to a Battalion Chief immediately.

    Ambulance Driver Requirements

    • Must complete all JPRs, accumulate at least 10 hours of road drive time in an ambulance, and become certified as a Fire Service Vehicle Operator.
    • Certification and training documented in Target Solutions.

    Engine Operator Requirements

    • Must be an ambulance driver, notify the training officer of starting the driving program, and complete required JPRs.
    • At least 12 hours of drive time on pumper apparatus is required, with a minimum of 2 hours on each type.

    Truck Operator Requirements

    • Must have 6 months as an Engine Operator and complete Truck Operator JPRs.
    • Required 12 hours of drive time on aerial apparatus and OSFM Fire Apparatus Engineer certification.

    Tender Operator Requirements

    • Must complete all Tender JPRs and achieve 12 hours of drive time on the tender apparatus.
    • Documentation of completion submitted via Target Solutions.

    Annual Recertification

    • Engine Operators, Truck Operators, Tender Operators, and Engineers must recertify yearly to maintain their classifications.
    • Re-certification processes must be completed by January 1 each year; failure results in classification downgrades.
    • Specific requirements include successful completion of FSVO driving courses and a minimum of 12 hours of documented non-emergency drive time.

    Flexibility in Guidelines

    • Training components and requirements can be modified at the discretion of the Fire Chief or Training Officer as needed.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Related Documents

    Description

    This quiz assesses your understanding of the driver training policy for members of the New Lenox Fire Protection District. You will explore key requirements for certification, the necessary orientation for specific vehicles, and annual qualifications for driving apparatus. Test your knowledge on standards that ensure safety and compliance in emergency vehicle operation.

    More Like This

    Use Quizgecko on...
    Browser
    Browser