Podcast
Questions and Answers
Which safety measure should be taken when preparing the vessel for operation?
Which safety measure should be taken when preparing the vessel for operation?
- Lift the engine hatch
- Clean out the weed from the strainer
- Turn on the sea water valve
- Double check the oil dipstick (correct)
What should be done to prevent water from spilling and damaging the electrics in the bilge area?
What should be done to prevent water from spilling and damaging the electrics in the bilge area?
- Clean out the weed from the strainer
- Lift the engine hatch
- Partially crack open the water-strainer twist lid (correct)
- Turn on the sea water valve
What should be done after checking the engine oil, belt tension, and performing a general visual inspection?
What should be done after checking the engine oil, belt tension, and performing a general visual inspection?
- Clean out the weed from the strainer
- Close the hatch (correct)
- Turn on the sea water valve
- Lift the engine hatch
What should be done during the dry dock process?
What should be done during the dry dock process?
What should be done when disconnecting from the dry dock?
What should be done when disconnecting from the dry dock?
Which safety measure should be taken when preparing the vessel for operation?
Which safety measure should be taken when preparing the vessel for operation?
What should be done after checking the engine oil, belt tension, and performing a general visual inspection?
What should be done after checking the engine oil, belt tension, and performing a general visual inspection?
What should be done to prevent water from spilling and damaging the electrics in the bilge area?
What should be done to prevent water from spilling and damaging the electrics in the bilge area?
What should be done when disconnecting from the dry dock?
What should be done when disconnecting from the dry dock?
What should be done during the dry dock process?
What should be done during the dry dock process?