Introduction to Power Plants and Energy Sources
14 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the main advantage of nuclear power plants over other types of power plants?

  • Lowest running cost
  • Highest initial cost
  • Permanent energy reserves (correct)
  • Simplest in design
  • Which type of power plant is typically used to provide power only during peak demand periods?

  • Nuclear power plant
  • Base load plant
  • Peaking plant (correct)
  • Hydro-electric plant
  • What type of reserve refers to generating units that are connected to the bus and ready to take load?

  • Cold reserve
  • Hot reserve
  • Prime power
  • Spinning reserve (correct)
  • Which type of power plant has the highest initial cost but the lowest running cost?

    <p>Nuclear power plant</p> Signup and view all the answers

    Which type of power plant is considered the 'cleanest' in terms of environmental impact?

    <p>Hydro-electric power plant</p> Signup and view all the answers

    What is the key difference between a base load plant and a peaking plant?

    <p>Base load plants operate continuously, peaking plants operate only during peak demand periods</p> Signup and view all the answers

    Which of the following is a characteristic of nuclear power plants?

    <p>They have inexhaustible fuel reserves.</p> Signup and view all the answers

    What type of reserve refers to generating units that are maintained at operating temperature and ready for service, but not currently in operation?

    <p>Hot reserve</p> Signup and view all the answers

    Which of the following is considered a firm power source?

    <p>Both hydro-electric and nuclear power plants</p> Signup and view all the answers

    What is the primary advantage of water power (hydro-electric) over other energy sources?

    <p>Permanent and inexhaustible reserves</p> Signup and view all the answers

    Which type of power plant is typically used to meet base load power requirements?

    <p>Steam turbine power plants</p> Signup and view all the answers

    What is the primary characteristic of a peaking plant?

    <p>It is used to provide power only during peak demand periods.</p> Signup and view all the answers

    Which type of power plant is considered the most complex in terms of operation?

    <p>Nuclear power plants</p> Signup and view all the answers

    What is the primary advantage of fuel power plants (e.g., coal, natural gas) over other energy sources?

    <p>They have exhaustible but readily available fuel reserves.</p> Signup and view all the answers

    More Like This

    Electric Power Generation Fundamentals Quiz
    10 questions
    Renewable and Non-Renewable Energy
    5 questions
    Renewable vs Non-Renewable Energy
    40 questions

    Renewable vs Non-Renewable Energy

    ConvincingGreatWallOfChina avatar
    ConvincingGreatWallOfChina
    Use Quizgecko on...
    Browser
    Browser